Why won't all my audio tracks export from iphoto to idvd

I've created a slide show in iphoto 5.0.4-- it has 144 pix and 3 audio tracks. works fine in iphoto. I've exported it as a QT file AND using send to idvd. Once i play it in idvd, only the first audio track plays, the rest of the slide show is silent. I have completley re done the entire show, re importing all the photos and audio, and still the same exact problem. HELP, I need this for a presentation this weekend!!!
Power mac G4 Mac OS X (10.4.3)

Hi Cyndi,
See this thread in iPhoto Forum: Topic: Slideshow to iDVD, photos ok but import only 1 song.
Power Mac G4 (QuickSilver) Mac OS X (10.4.3)

Similar Messages

Why won't some photos copy to iPod from iPhoto?

I created a folder of favorite pictures in my iPhoto specifically to be set to music in slideshow on my iPod. But of the 65 photos in the original iPhoto folder, only 52 appear on my iPod. (I've tried syncing the entire folder several times--with the same result.) What could be the reason that iPod won't accept so many of the iPhoto pictures?

For photos try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
Not all video formats that work in iTunes are compatible with the iPad - the supported formats are (from http://www.apple.com/ipad/specs/) :
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Have you tried Advanced > Create iPad Version and then sync those versions to the iPad
The iPad's supported audio formats are :
HE-AAC (V1 and V2), AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV

Video but no audio when exporting from iPhoto

I have very small (30 sec) clips of video from a digital camera downloaded into iPhoto. When I export or share a clip to QuickTimePro 7, iMovie, my desktop, or e-mail the video goes, but no audio. I have tried so many different ways, I can't even remember what I've done. Can anyone help? I'm at my wits end, and it's a video of my baby laughing for the first time and I want to send it to everyone!!!

With the video open in the QuickTime Player, choose Show Movie Properties from the Window menu, click on the Resources tab, control-click on the entry which contains the file's location on your computer, and choose Show in Finder from the menu which appears. Once the file has been located, download MPEG Streamclip and use it to convert the file; save the converted file on the desktop.
(26939)

Media Encoder isn't rendering all my audio tracks?

I've been using Media Encoder to render my Adobe Premiere sequences and up until yesterday, I never had a problem with it. Out of nowhere, it won't render more than 2 audio tracks. The audio plays fine in the timeline preview in Adobe Premiere, but when I render it, some of my audio is missing! I have no idea what could be causing something like this!
I'm rendering in h.264 at Youtube 1080p 29.97 settings. I've done this for all of my previous videos and haven't had a single problem having 3+ audio tracks until the last two videos I've done

Sometimes a project can be weird/corrupted and do strange things. Then you need to outsmart the computer. For example, try an audio-only export. Create a .wav file and import back into project, and if all tracks are properly represented in that mix, add .wav to timeline, mute all other audio tracks, and do your final AV export using that new audio.
Thanks
Jeff Pulera
Safe Harbor Computers

All additional audio tracks in synchronized or compound clips are merged into the mono-mix.

Hi all.
I have a video with a stereo track and six separate audio tracks from set. I synced them. If you open the synchronized clip in a separate timeline, all audio tracks are on place and have their names. But if I append it to the storyline and expand audio components, there are only two audio tracks: monomix from the original video with its name and one stereo track named "a1", which is a mix of all additional audio tracks. The same thing happens if I make a compound clip, with a small difference. It forced me to give up the work I wanted to do.
Screenshots:
https://www.dropbox.com/sh/frvgk3d1hjbo6s6/Y3AWxAirnn
Any thoughts?
Victor

Multicam works, but it is not very convenient. I can not use Sync-N-Link as I had planned, I get problems with export AAF and DaVinci do not like multicam in XML.
Channel configuration mirrors two tracks in the storyline, as you can see in the screenshots.

Why won't my final cut 7 export my entire :30 movie in pro res 422 60i

Why won't my final cut 7 export my entire :30 movie in pro res 422 60i?
And some transitions are not rendering properly.

Post this on the Final Cut Studio forum. This is the FCPX forum.

Why won't all of my smart playlists sync from itunes to my ipad?

Why won't all of my smart playlists sync? They show up in the playlist screen of my ipad music app. When I click on the playlist, there are no songs listed. I sync it again, and the playlist now shows zero songs in the list. I keep trying to sync it, and it goes back and forth from showing there are 60 songs in the playlist, which I can't play, to showing zero songs. Please help.

Yes, sorry, you are correct, it was iTunes Match. I purchased storage on iTunes Match (probably a bad idea), because I had over 1000 songs on my i-phone 4S -which is eating up my storage space. Well, anyway...After I purchased it, I followed the instructions: go to: Settings, "open" music, "Turn on" iTunes Match. After I did that, I opened up the Music App -on my phone -ALL of my playlists were gone and only 208 songs showed... I messed up my phone once before and I had to log into my i-Tunes account (on my computer) and "reset" to another date. I would like to do that again -if possible...
Please help!

Why won't all my iTunes upload onto iClouds ?

Why won't all music that I have bought from iTunes upload unto iCloud ? I have paid for iTunes, iCloud and iMatch. What is the problem ?

Welcome to the Apple Community.
What formats are the files in, some formats are not accepted, nor are files over 200 MB or those encoded with bitrates less than 96kbps.

Why can't I separate audio tracks when I import clips from an sd card into FCP 7

Why Can't I separate audio tracks when I import sd card files into fcp 7?

You need to ask this on the Final Cut Studio forum
http://discussions.apple.com/forum.jspa?forumID=939

Why won't some of my numbers spreadsheets from my iPad open with iCloud on my Mac (Yosemite)?

Why won't some of my numbers spreadsheets from my iPad open with iCloud on my Mac (Yosemite)? When I look at the files in FiNader there's a grey bar next to the files that won't open.

I am having the same problem. Created new spreadsheet on iPad with fresh iOS and Numbers installs (3/2015) and am unable to open this spreadsheet in iCloud in Safari on MacBook Air (all current). I get the following message:
"Sorry, something went wrong.
This spreadsheet can't be opened right now. Please try again later."
Tried reopening on Mac from iCloud and resaving; still cannot open.
Quick fix: Copying the spreadsheet content from the iPad spreadsheet to one created on the desktop recovers the ability to open it in iCloud in Safari.
Thanks.

HT2417 Iphone model MC608LL. Why won't it switch back to ringer from vibrate?

Have 3G Iphone model MC608LL. Why won't it switch back to ringer from vibrate? Local repair shop said it was a software issue. AT&T store said to back it up and update OS version. Did all that. The switch still won't take it off vibrate.

- How did you delete it? If you used Settings>General>Reset>Erase all Content and Settings without the iPod being charged you could have completely drained the battery.
- After charging for at least half an hour try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next, after the charging above, place the iPod in recovery mode and try to restore it via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

No audio when exporting from mpeg to flv

We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?

How are you determining that the FLV has no audio? Are you playing it back in VLC Player or importing it into Flash?
Also, do you see a full range of formats on the system where you don't hear audio? If some formats are missing this might be a licensing issue. Also check if AME recognizes audio on the MPEG source (hover over it in the queue and look for audio info in the tool tip).

Why won't my TV programmes I purchased from my IPod sync onto my computer ?

Why won't my TV programmes I purchased from my IPod sync onto my computer ?

Are yu doing this:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases

Why won't files open in Camera Raw from Bridge?

I am trying to open files in Camera raw from Bridge but get the following message.
"Bridge's parent application is not active."
Both Bridge and CS5 are open and I have opened camera raw previously.
Any suggestions.
Cheers

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

What is error 150:30, and why won't CS4 work after moving it from old mac to new?

What is error 150:30, and why won't CS4 work after moving it from old mac to new?

Reinstall the software properly
Mylenium

Why won't all my audio tracks export from iphoto to idvd

Similar Messages

Maybe you are looking for