Why won't an application launch after migrating to new computer?

I have a new non Intel 2.3 Ghz G5 OSX 4.7 1.5 GB RAM that I used the migration assistant to move files from another non Intel G5 OSX 4.7. We use Quark 6.5, Photoshop and Illustrator as our main working applications. I had to reinstall Photoshop and Illustrator 10.0.3. I've been able to boot up all the other applications on the computer except the Illustrator app. I've reinstalled several times. But each time when it looks like it's going to open, it crashes and gives me the "send report" window. I've tried asking questions on the Illustrator forums site but no one there seems to know what to do. I've thrown away the .plist, installed Illust. 9 to update from, used another disk to install from and also created another account to see if it is a system problem (and it did the same thing there, too). I have another G5 set up with the same software and it works fine. So I know this software will work on this computer. Can anyone give me any direction from here? Kappy or Dr. Smoke, if you're listening, can you help me out?

It might be simpler to boot the new machine into Target Disk Mode, hook it up to a machine that works, and clone from the working machine to the new one. Use Carbon Copy Cloner, SuperDuper!, Disk Utility (restore function), etc.

Similar Messages

Acrobat 8.1.5 no longer works on Mac after migrating to new computer

Since migrating the contents of my old computer (2011 MacBookPro) to a new one (2014 Mac Mini), this application no longer works. After I open a PDF, a few seconds later I get the message "Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional." The problem is that I don't have any other Adobe apps to launch. This app came as part of a bundle with the ScanSnap scanner. How to I get Acrobat 8.1.5 to function on my new computer?

I have the same problem - my data had better not be gone! Why won't Apple address this problem?

Messages app not syncing after migrating to new computer

Scratching head tonight...
Used the migration assistant to move my profile from my 2011 MBA to my new 2013 MBA
Migration Assistant ran flawlessly (supposedly)
After completing the process, rebooted the new MBA and logged in without issue -- loaded the Messages App and the historical data is there, but nothing new is showing up on the computer
Messages sent are showing on my iPhone and are still showing in the old profile on the original MBA but not on the new MBA
Obviously the data migrated over since the historicals are there, but why would the sync break and how can I fix it?
Messages -> Preferences -> Accounts show the iMessage account enabled with all the appropriate addresses (phone number and icloud.com and me.com)
I tried logging out and logging back in to Messages as well as the iCloud -- no joy...
Suggestions?
Thanks!
Mike

Hi,
I don't have a second computer that can also run Mountain Lion so that I could test this.
In normal circumstances if you remove the Apple ID from the iMessages account on the Mac then re-add that Apple ID you get a pop up on you iPhone and iPad when you open Messages that the computer (by Name) is using the Apple ID.
The temptation with a new computer is to create an Admin account that ends up being based on your Name which in turn creates the name for the computer (See System Preferences > Sharing).
I am not sure if issues can arise if both computers end up with the same name.
7:50 PM Saturday; June 29, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IChat AV: Unable to chat after migrating to new computer

Hi all,
I used Carbon Copy Cloner to migrate my entire drive to a new computer while my wife uses my Powerbook on a job out of town. Everything seems to be working fine--except that while we can chat with other folks, we cannot chat with each other. We really want this to work, so that our four year old daughter can see her mom. Can anyone suggest why this is happening?
We have both trashed all four iChat prefs and recreated our AIM accounts. I have even created a new MobileMe account. Our computers recognize each other, we can invite each other chat, we can accept the invitation, but then we always get the "communication error" message.
Again, as I say, we both can chat with others, so this does not seem to be a port or iSight problem. I would guess it's something deeper in the OS that prevents the computers from talking to each other because they think they are each other. I couldn't find anything to change in Accounts in System Prefs. But what do I know?
Any advice?
Thanks.

Ray,
A huge thank you! Immediate success!
Frankly, also a big thumbs down to the Apple engineers who never considered this issue or posted a helpful hint about it. Could it be that hard to consider this situation? Perhaps so. Still, what a simple fix--yet one I would never have thought of. Why should "sharing" issues prevent iChat functioning? How would I know, being kept in the dark by Apple? There is, I'm sure, a clear answer if Apple would treat us like adults. But since they want to avoid that (it's like politics), we're dependent on the kindness of strangers. Thank you, Ray, for being my kind stranger today. Watching my wife and daughter laugh together on iChat was an experience beyond the power of my words to convey.
Bowing,
Franz

InDesign CS5.5 won't launch after migration to new Mac

In my main user profile, InDesign will start to open and crap out after initializing Plug-ins. No error is reported. When I log into a test user account, I'll at least get this error, "InDesign quit unexpectedly":
I've tried trashing preferences and restarting, but no luck. My guess is I need to reinstall, but can't find a CS5.5 installer to download (the suite was bought via download originally). I'm not interested in upgrading to CC.
Running Mavericks.
Appreciate any help.

I was able to download the InDesign installer from prodesigntools. But it won't recognize my serial number (which I'm getting from my account on Adobe's site).
I thought it be because my serial number is for the Design Standard Suite. So I went back to prodesigntools to download that installer, but am now getting "Access denied". I've tried in multiple browsers, cleared my cache and cookies, and in Chrome's incognito mode. I followed the directions explicity again but can't get to the CS5.5 Design Standard installer.
Any ideas?

Why is Acrobat 8 not launching after Migration Assistant Tranfer?

"Adobe Acrobat 8 Pro cannot be launched at this time. You must launch at least one other suite component [WHICH I HAVE] (such as Adobe Photoshop) before launching Acrobat 8 Professional."

Migration assistant doesn't work with everything. I'd be amazed if it managed to get all the licensing stuff. I'd recommend you reinstall.

Cannot open Microsoft Office Mac 2011 after migrating to new computer. OS 10.9.1: Microsoft Error Reporting log version: 2.0 Error Signature: Exception: EXC_CRASH (SIGTRAP) Date/Time: 2014-01-19 23:31:24 0000 Application Name: Microsoft Word Application

Got a new MacBook Pro and migrated my settings and applications from old computer. Reinstalled Microsooft Office from a disk, after I opened a document and it said I was missing some software components. Now when I open any office application, I get:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_CRASH (SIGTRAP)
Date/Time: 2014-01-19 23:31:24 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.9.131030
Crashed Module Name: merp
Crashed Module Version: 2.2.4.131030
Crashed Module Offset: 0x00004422
Blame Module Name: MicrosoftSetupUI
Blame Module Version: 14.3.9.131030
Blame Module Offset: 0x0000e516
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0

Hi,
Do you get the error message like "Office <Update version number> can't be installed on this disk. A version of the software required to install this update was not found on this volume. To learn how to fix it this issue, see "I can't install Office
for Mac updates" at http://www.microsoft.com/mac/help.mspx."
If it was, please follow the kb to fix the issue:
http://support.microsoft.com/kb/969065/en-us
Then, here is a forum for Office based on the Windows operation system, we are lack of the source about the Office for mac, you'd better post your question to Answers forum:
http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
Regards,
George Zhao
TechNet Community Support

Asked for serial number after migration to new computer

I did a migration to a new MacBook pro from my old iMac and now Aperture is asking me for the serial number.
I thought using the Apple migration would take care of the complete migration.
This is the only SW that I have noticed that have this issue. All other of my licensed SW is working just fine after the migration.
Suggestions?
/ Christer

Enter the serial number. Not all software magically transfers serial numbers.

Aperture won't take serial number after transfer to new computer

I used the Migration Assistant to move from an old computer to a new one. Now Aperture asks for a serial number and it won't take the one I have. It's the orginal number that came with the software.

Pro Apps like Aperture don;' take to being installed that way. You'd be best to re-install it from the media you received it on (I'm assuming you didn't get it from the App Store as you mentioned a serial number).
If you don;' have the original media you can download the trial version and use the serial number you have to authorize it.

After migration to new computer -- null file is missing on existing project

I just moved to a new MacBook Pro from an old MacBook Pro (same models just a faster chip with more RAM). I migrated everything from the old to the new. I went to burn a DVD of an existing iDVD project that used a 5.0 theme and saw that an error was present. The main theme background image is missing and I get an error reading "The file (null) is missing." Any suggestions?

I've never tried to "migrate" an exiting iDvd project to another mac and I'm not even sure how well that works.
But if I were moving an existing iDvd project from one mac to another assuming they both had identical versions of iDvd & QT as well as similar assets for the project in question (ie, templates / themes), then I'd do the following which applies to both iDvd6 and iDvd'08:
http://www.apple.com/support/ilife/tutorials/idvd/id3-4.html
(Ref. Project Archive or Disk Image)
Hope this helps but if not just come on back.

Acrobat X Pro won't open at all after installing on new computer. Please help! It is from the CS6 Suite

Hi, Can anyone help me? I had to change my computer, so I re-installed my whole CS6 Suite. Everything works except my Acrobat X Pro... It won't even open!! I am using a Windows 7 PC ... I even had Dell try and help me... the only thing they where able to do was help me be able to see .pdf docs in Reader! But I can't open a document, or create one, block sensitive info, nothing!

Hi Lisley56, I found the solution there is a Plug in for Acrobat X Pro that came with Adobe Suite CS6... I downloaded it and that did it!!! It's called "Acrofix". Try looking it up in the Adobe website!!! I hope it works!!

Thunderbird was working after migration to new computer, now lost email/profile when trying to switch to IMAP?

I moved Thunderbird to a new PC about 1 year ago. Everything was working OK for me until now. I wanted to switch from POP3 to IMAP and really messed things up.
I kept the old POP3 accounts configured and added them as IMAP. I was thinking that I could just copy from the POP account to the IMAP account once they both showed up there. That did not work. Either something unexpected happened, or I messed things up. Now all my email is gone.
I have since removed all of the accounts and wanted to get back to where I was before, but am not able to figure it out.
When I initially moved the email over about 1 year ago, I moved the profiles from the C: drive to the F: drive to save space on my new SSD C: drive. I think in the process of all of this, I've lost which of the many profiles I've found on the various drives is the original one I've used. Is there a good way to sort all of this out and get my email back in Thunderbird?
I do know that the email is still there, because when I search my PC, the email is still found using Windows Explorer, but I don't see how to get it to show up in Thunderbird again.
I'd really like to switch to IMAP from POP3, but if it's not possible, I can live with that.
I haven't messed with my wife's email (we have 2 users on the PC) - her email is still OK.
Any suggestions how to get the email back into Thunderbird?

Good plan.
I'd also advise against changing the location of the individual message store locations, as, as you have found, it makes keeping on top of it all somewhat more complicated. The best reason I can think of for altering the "Local Directory" setting(s) in Account Settings is in a dual-boot system where you want the message stores (but not the entire profile) to be visible to two or more separate operating systems.

Personal folders not visible in Thunderbirds after migration to new computer

I moved my Thunderbird profile to a new computer (and edited profiles.ini to point to the backed-up profile. Now in Thunderbird on the new machine I have the Local Folders Inbox, Sent, Trash, but the Personal Files folder with my saved and categorized mail sub-folders is not visible in the left-hand panel. It appears to be intact in the /Mail/Local Folders/Personal Folders.sbd/Archives.sbd folder, just not visible when I run Thunderbird.
What do I have to do to get these folders and their subfolders back again.
...Doug

Doug,
I had the same problem, and believe I found the solution. I was transferring a profile from one computer running Win XP to a new computer running Win 7.
I could see the file folders evident, as you did, using Windows Explorer to look in the profile folder, but they were not showing in the left hand pane of Thunderbird when it was running as they did in the XP machine.
I went to the "Tools" menu, selecting "Account Settings," and then clicked on "Local Folders" in the left portion of the dialog box. Then in the right portion of the dialog box under "Local directory:" I selected the "Browse" button. I then browsed down into the "...AppData\Local\Thunderbird\Profiles\xxxxxxxx.default\Mail\Local Folders\Outlook Express Import.sbd" ( in my case - the very last portion of yours might be different but should probably still be a ".sbd" file, and of course, the eight x's would be the random name Thunderbird assigns to your Profile file. ) I then clicked the "OK" button at the bottom of the dialog box. ( I believe the program then informs you it must close and restart. ) Anyway, go ahead and close Thunderbird and restart at this point.
When it restarts, my old folder structure appeared as it did on the earlier machine, and all the files were intact.

Can't see EJB objects in Application Navigator after migration

Hello
I can't see any objects in Application Navigator after migration from previous version of JDeveloper (9.2.0.5), in System Navigator view I can see all sources. Has somebody any idea what the reason is?
Tom

In the application navigator you should see one node per EJB, when you stand on it you'll see the various source files in the structure window.

Why won't my apps launch?

why won't my apps launch?

something to do with the task thing in your computer to get the app thing working and then syncing it to your ipod. I cant remember what it was you had to do with the task thing in the control panel. but hope that somewhat helps.

Why won't an application launch after migrating to new computer?

Similar Messages

Maybe you are looking for