Why won't computer acknolwedge ipod plugged in? Works otherwise...

I plug in ipod. I get no feedback, no usb plugged in sound and its not showing up in my My Computer Manager. I tried R's and I can't reset.
Is it the cable?
homebrew and Dell   Windows XP Pro  

Is your bat' flat or low? sometimes when you connect a flat i-pod to your pc it will take a few minutes to register it
or visit FAQ's
  Windows XP  

Similar Messages

  • Why won't my secure thumb drive (FAT32) work with os lion?

    Why won't my secure thumb drive (FAT32) work with os lion?  I have used it ok with older mac operating systems.  When the thumb drive is inserted in the usb port, an error message appears stating that the disk was not ejected properly.  It shows as readonly in Finder.  When I try to eject it, the spinning wheel appears and I have to relaunch finder.

    Hi princessmonsta,
    Thanks for using Apple Support Communities.  This article has some information on things to check if your sound is not working as expected that may help:
    OS X Mavericks: Adjust your computer’s sound output
    http://support.apple.com/kb/PH13908
    Cheers,
    - Ari

  • HT4528 Why won't my apple id and password work on my iPhone?  It is working on my Macbook but not the iPhone?

    Why won't my apple id and password work on my iPhone?  It is working on my Macbook but not the iPhone?

    there might be something different on the mac you can try appleid.apple.com and reset your password i would also check the mac to see which appleid is signed you may have multiple apple ids and not know

  • Computer won't start with iPod plugged in

    Hey all,
    Just got a brand new MacBook Pro and a 30 gig iPod. When I restart with the iPod plugged into the USB port, the computer sits at the white screen forever and doesn't boot into OS X until it is disconnected. How do I fix this? Thanks!

    I don't know if this will fix the problem, but here it is:
    1. start the macbook up normally w/o the iPod plugged in.
    2. right after u hit the power button hold down the button combination "s" and "command"
    3. do not let go until the screen goes black and white text is on it. when the text stops moving there will be a prompt.
    4. type the following text WITHOUT QUOTES "fsck -f"
    5. then when it is done do that same thing again.
    6. then try to exit type the following text WITHOUT QUOTES "reboot"
    7. then try to reboot with the iPod connected
    if that does not work take it into a apple store.

  • Why did my 4th generation iPod touch stop working with my docking station?

    I have an Altec docking station and my iPod suddenly stopped working on it.  The station comes on and makes a beeping noise like it is connected when I insert the iPod.  However, the music will only come out of the iPod.  The docking station will charge the battery on the iPod, so I assume it isn't broken. 

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • Why won't BOTH our iPods sync with my mac?

    I am trying to sync my and my girlfriend's iPod touches, and when I try either option in File> Sync iPod or >Transfer from iPod, the text is grey so I cannot do this. Its driving me up the wall, I can't find anything relating to WHY our iPod's aren't syncing????

    - To transfer iTunes purchases from iPod to computer see:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    Note it says the computer has to be authorized for the iTunes accounts that purchased the music.
    - For other music you will need a third-party progtam like ne of those diacussed here.
    Copy music
    - An iPod can only sync to one iTunes library.  If a computer is synced to another library and you try to sync to another library the items will be grayed out.

  • Restart of computer with iPod plugged in issue

    Hi,
    Whenever I restart my Windows Vista computer with my iPod Classic plugged in via USB, the computer freezes and is unable to get past the DELL logo screen. Is there a known issue with this? When I have my USB flash drives plugged in, there is no problem with restarts.
    Any information would be greatly appreciated.
    James

    the ipod is like a mini computer ... you should disconnected first before you restart ... also, restaring with ipod connected might get damaged cos of power changing up and down, so you're risking to damage the ipod. good luck.

  • HT1719 ok why won't sync to ipod come on list

    got an ipod shuffle have opened account in tunes and reinstalled things 4 x why can't i get the prompts i need to work it, i'm 2 degrees above computer dumb

    So it sounds like this is the first time you are trying to use this iPod shuffle with this computer...  It has not previously worked.
    If you have been trying to connect the shuffle to a USB hub, I would connect it to a direct port on the computer.  And if you have not already done so since installing iTunes, do a shut down (power off) of the computer.  Use this procedure to reset the shuffle
    http://support.apple.com/kb/HT1655
    Start up computer with shuffle NOT connected.  Run iTunes.  Connect shuffle.
    If that does not help, you should also try disconnecting ALL other USB devices, except for a standard mouse and keyboard.  This is in case there is some USB device conflict.  Then, connect the shuffle to a USB port that is directly on the computer.
    If that does not help, and you have an Apple Store nearby, I would make a reservation at the Genius Bar to have the shuffle looked at.  If it is defective, you can see about getting it replaced under warranty.

  • HT1338 I have windows vista. Why won't my apple ipod software download?

    Am trying to download Apple Ipod. Won't download without "error" message.
    A,m using HP Windows Vista

    What are you trying to download exactly?  A firmware update for your iPod Classic?  What is the error message you are receiving?
    B-rock

  • Why won't my new iPod Touch 4th generation sync audiobooks?

    I have tried to sync my library from my old iPod Classic to my new iPod Touch, but it will not sync my audiobooks.  I have eyesight problems and my audiobooks are important to me.  When I connect to my computer and pull up iTunes, it shows the audiobooks are there, but when I snyc, my iPod doesn't even show a catagory for Audiobooks.    Can someone help me. 

    I feel so stupid!  I found the answer in the "More like this" area. 
    Here is an excerpt from the area that helped me:
    "he solution (someone already posted this, but not as emphatically) is  simply to *SCROLL DOWN* within the "books" tab when your ipod/iphone is  connected to itunes and you have selected it on the left pane.
    This  solution is not obvious if you have a smallish resolution monitor, as  audiobooks used to appear at the top. Now, the text books are  exclusively at the top. So, if you don't have any text books in your  library, everything looks mysteriously empty."

  • Imac won't boot with Ipod plugged in.

    60gb 5G Ipod. Imac Intel Core2 duo 2.0 ghz.
    About 80% of the time, if the Ipod is plugged in (through a USB hub), the Mac will only boot to a grey screen. As soon as I unplug the Ipod, the Apple appears on the Imac screen. My Iphone is plugged into the same USB hub at the time, with no similar behavior. I've tried restoring the Ipod with no change.
    I've tried making sure that the startup disk pref pane is set correctly and locked, but for some reason, whenever I check it, its unlocked again. The Ipod does not appear there. I do have a clone of the startup disk attached to an always on external firewire drive.

    Hello Mark
    Having the iPod connected during the boot process is confusing the startup manager!
    First try: *System Preferences / Startup Disk* and select the *Mac OS X, 10.5.4 on Macintosh HD* then *Click the lock to prevent further changes.*
    You can also try ejecting the iPod be for shutting down or only sleeping the iMac when the iPod is charging!
    Normally my iMac sleeps, but as a habit I always eject and disconnect all USB storage devices, iPods, cameras, flash drives, etc. be-for shutting down.
    Dennis

  • Why won't my new iPod nano work with griffin itrip?

    I just receiveed a new ipod nano as part of the replacement programme, but it will not work with my griffin itrip or my old speakers even though the connection is the same - anyone know why?
    thanks

    I used an iTrip with my old Classic 160, but when I got my 6th gen nano, it wouldn't work either. My iTrip was old, and the connector had lost it's plastic bits, so I thought that might be the reason. I could still use my Logitech speaker dock, so I don't think they changed the connector.

  • Why won't my old iPod (4th gen) sync with iTunes 11.1.5?

    My 40GB 4th generation iPod won't sync automatically or manually when I connect it (via iPod dock) to my Mac Mini running OSX 10.8.5 and iTunes 11.1.5.
    The iPod shows up in the iTunes side bar, but that's the extent of the interaction between the two. Even dragging selected songs to playlists in the sidebar won't work. Is this just an age-related incompatability issue for which there's no fix, or is there a solution? Thanks.

    If those options are grayed out, that probably means the Sync Music checkbox on the iPod's Music screen is not checked.  Then, your iPod is set to sync manually.  Check the iPod's Summary screen in iTunes to see if Manually manage music is checked.  If it is, the iPod is maintained manually, NOT automatically when it is connect or when you click the Sync button.
    I wanted to select the latter so that just the songs I checked off in my iTunes library (those added since the last time I synced the iPod) were copied over.
    Automatic syncing does not work that way.  When you set up the iPod's Music screen (and Apply), it syncs based on what you select on that screen (the songs that are part of the selected playlists, artists, albums and/or genres).  It does not add songs to what is already on the iPod, based on what is checked or not check in your iTunes library.
    If you want to add songs to what is already on the iPod, and the iPod is currently set to Manually manage music, this is how to add (and remove) songs.
    To Add songs manually...  Show a list of songs in the iTunes window.  For example, you can click on Music under LIBRARY to show your main iTunes music library list.  Select a song that you want on the iPod, and drag it to the iPod in the sidebar.  You can select more than one song at a time when you do this.  Alternately, select the song(s), right-click on the selection, and choose the command to Add to Playlist -> [name of your iPod].
    To Remove songs manually...  In the sidebar, click on the small triangle to the LEFT of the iPod's name, to drop down the iPod's content list, indented below the iPod.  Click on Music there.  To the right, the iPod's song list is shown.  Select the song you want to remove from the iPod, and press Delete on the keyboard.  You can do this with more than one song selected.
    There's nothing on the iPod that's not currently in my iTunes library, but I'd prefer not having to do a complete resync.
    So, if you want to set up automatic syncing, you can check the box for Sync Music on the iPod's Music screen.  If 40GB is enough to hold your entire iTunes music library, you can choose to sync Entire music library.  Then, "everything" (that is music) syncs to the iPod.  Going forward, any changes to your iTunes music library automatically syncs to the iPod (the next time it is connected or you click Sync if already connected).
    Otherwise, you can choose to sync Selected playlists, artists, albums, and genres.  A good way to set this up is to create new playlists in your iTunes library with ALL (and only) the songs you want on the iPod (or you can use existing playlists).  Back on the iPod Music screen, select those playlists under Playlists.  Going forward, to update the iPod, just update those playlists (add/remove songs) in your iTunes library.  So, if you have new songs, add them to one of those playlists.  iTunes automatically updates the iPod with the same changes (the next time it is connected or you click Sync if already connected).
    When you click Apply, the existing content on the iPod is replaced by the content selected on the iPod's Music screen.  Going forward, iTunes is responsible for automatically keeping the iPod "in sync" with your iTunes library, based on now the iPod's Music screen is set up. 
    To me, setting up and using automatic syncing is the most convenient and elegant way.

  • Why won't my 3g ipod touch update to ios5 after its been restored?

    I restored my 3g ipod and it still won't update to ios5. How can I solve this?

    Are you sure that it is a 3G iPod? To be sure, see: http://support.apple.com/kb/HT1353   If it is a 2G iPod, it cannot go beyond 4.2.1

  • Why won't computer detect IPhone 5? I have troubleshooted by trying to restart the device manager. It is in DFU mode

    I cannot get my IPhone to be detected. Windows detects it as an unknown device and I have it in DFU mode. I am very confused as to what to do. I erased the IPhone because I bought it from someone and now it isn't working....

    I have tried all of those things. I can get it to DFU mode but no computer will detect it. One comouter detected it as an unknown device and wouldnt let me do anything with it still.

Maybe you are looking for

  • Replacing a lost or stolen pre-paid sim card

    Please call us on 13 22 00 to arrange a replacement. Any credit on your Pre-Paid account will remain, but credit expiry periods will still be applicable. If your credit is about to expire, you can recharge your account to retain the credit balance un

  • Updated T520's video and chipset (and WiFi) and now can't boot in-dock

    My T520, Optimus: HD3000&NVS4200, is sitting in "Lenovo ThinkPad Mini Dock Series 3" and connected to Dell 2711 via dock's DisplayPort. I've had the T520 for a a month or so (and drivers it arrived with) and (finally) decided to do a few updates,

  • Received HTTP response code 500 with acknowledgment

    Hello, This is my process : R/3 (Idoc) -> XI -> 3rdParty(CSV). I use R/3 4.6C and XI 3.0 SP10 This work fine but there is a problem with the acknowledgment : Transmitting the message to endpoint http://<server>:8000/sap/xi/engine/entry?action=execute

  • New feature request: Having the possibility to use different keyboard language on multiple monitors.

    I would love to see a new feature to allow the use of different keyboard language on multiple monitors with the same desktop mac. Ex.: On dual monitor desktop, use english keyboard on the left screen and french keyboard on the right screen. So I woul

  • Condition Determination in Quotation

    Dear all, In quotation transaction pricing condition types is not determining automatically. Downloaded condition objects from ECC - 'DNL_CUST_CNDALL, DNL_CUST_CND, DNL_CUST_PRC'. I have add user parameter PRC_TRAC and check SLG1 downloaded condition