Why won't exe run over vi server when VIs will?

Hello,
I have a "Server" which I intend to run on a locat machine at my desk.  It's function is to simply gather messages in a text box from multiple clients.  I'm using the VI Server method.  The VIs work but when I build them there is no communication.  On "My Computer" I checked "TCP/IP" and set the port to 3368, I currently have another server on 3363.
I can't figure out what my issue is.  I have rebuilt the client exe many times with various inputs (using static ip for the machine name setting, then using the service name for port number and service name, and the port 3368).  These various builds were not successful.
I think I have gone through the appropriate steps to attempt to correct the issue but I can't solve it.

If the client is an EXE you don't need to enable VI Server for it. This can cause problems because of the port being in use by the VI. The client exe can basically have an empty ini file (just the section name in the first line is sufficient).
Did you specify the machine name to connect to in the exe? If the client exe and the server are on the same machine use localhost or 127.0.0.1 or the hostname. Leaving it empty will not work because this will return an application reference to the current application instance (in this case the exe itself) no matter what port you specify.

Similar Messages

  • Why won't firefox connect to the internet when IE will?

    Mozilla stopped working about a week ago without my knowledge of any updates or anything like that. Internet Explorer still works fine and will connect but when I try to use Firefox it tells me 'unable to connect.' I have already removed Firefox and re-installed but that has not corrected the problem. I also spent some time looking through the settings of Firefox and things seem in order. Do you have any suggestions? I'm not sure why this happened but I can't take IE much longer (yeah your product is that good!). I am currently running windows 7.
    Thanks,
    Jonathan

    There is a troubleshooting article with suggestions. Don't know whether you've tried these yet: [http://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can Firefox cannot load websites but other programs can | Troubleshooting | Firefox Help].

  • Why won't my Mac Air wake up when it's supposed to?

    Why won't my MacBook Air wake up when it's supposed to?

    Hello, marjoriefromcamano island.  
    Thank you for visiting Apple Support Communities. 
    Here is a troubleshooting article that I would recommend going through when experiencing this issue. 
    OS X: When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    Cheers,
    Jason H.

  • Why won't OS X Mavericks start downloading when I click the download button? It thinks and acts like it starts downloading with the thinking circle moving then stops and goes away. I have tried going to the purchases in the app store and restarting it the

    Why won't OS X Mavericks start downloading when I click the download button? It thinks and acts like it starts downloading with the thinking circle moving then stops and goes away. I have tried going to the purchases in the app store and restarting it there and that is not working either.

    Repair permissions, restart your computer & try again. 

  • Why won't Elements 10 accept my password when it did before?

    I have tried numerous times to put in the password when opening Elements 10.  It would not accept it.  so I decided to get a new password.  In filling out the outline they want you to click yes on the Personal URL.  Meaning I assume that you put your pictures on the wed for others.  I do not want this. Am I not understanding that.    [email protected]

    Double post.
    Please see:
    Why won't Elements 10 accept my password when it dd before

  • Why won't my tunes shuffle... when did this happen? dumbfounded I am...

    Why won't my tunes shuffle... when did this happen? dumbfounded I am...

    arnoldworsley
    Premiere Elements 10 on Windows 7 64 bit.....
    It sounds to me that you have a player problem or a disc problem and not a burn software problem.
    What players are involved - computer players (which ones) or DVD player standalone or attached to a TV or other?
    As for the DVD-R discs, I am not taking that out of the problem equation. If you take one of these DVD-R discs from the Premiere Elements 10 burn to DVD disc and explore it, do you find an OpenDVD Folder and a VIDEO_TS Folder? If so, if you open the VIDEO_TS Folder, can you find a VTS_01_1.VOB file and play it back on the computer
    If you do that same thing with one of the DVD-RW discs from the Premiere Elements 10 burn to DVD disc and explore it, what do you find?
    How long have you had the DVD-R discs in comparison to the DVD-RW discs? You mentioned that you did all this successfully a couple of years ago, and everything was the same then as now. Did you have these batches of discs then as opposed to now? Are the players the same then and now?
    Burn to Folder (4.7 GB) is always an option. But, I would like to see you have the opportunity of choice for to burn to disc or burn to folder.
    Looking forward to your results.
    Thanks.
    ATR

  • Why won't Parallels run the program?

    OK so I'm an teacher and recently I've recieved new software to try out with my classes and obviously it won't run on my laptop (os Mountain LIon). So I started to investigate the options.
    1 Make partitions and run two os's at separate times. NOT working anymore not sure why.
    2 Use bootcamp to run the two os's. Haven't tried yet.
    3 Use a virtual machine. After investigating I chose to use Parallels 7. It downloaded and seemed very user friendly and even gave me the option of a trial windows 8. I installed it and the program wouldn't work it needs to be a windows 7 so I found one and it wouldn't work either then tried to install Snow Leopard. I tried with the disc that came with my laptop didn't work said that only server versions are supported so I found a server version downloaded it and installed it but it won't even give me the option of seeing the disc within Parallels and my file sharing isn't working with it.
    So that's where I'm at, I've been working at this for a week now, reading around and trying new things but still not sure why none of them run the program.
    A MichaelLax has posted a detailed way to install snow leopard but I'm not sure why all the terminal parts are necesary if that's what I need to do I'll do it but I don't understand why.
    http://forums.macrumors.com/showthread.php?t=1365439
    I'm not looking to use the Parallels or any program much only to acces the information that they've given me to see if I can use it.

    OK so here we go I installed windows again and everything seems to be working as normal so I put the disc in and I took screen shots but it won't load them for some reason but anyways here it is. These are the files and what happens when I click on them
    Audio file     audio files always able to access
    Video file     same as audio
    xSprocket     several worksheets and things like that
    xtras          more program files
    autorun      when I click on it saws notepad is too small I need a bigger editor
    readme      system requirements
    TN_active teach file     when opened on the mac side it says its a powerpc product it won't open and on the windows side it switches to mac and opens stuffit expander (the compression thing I told you about) and then creates a file with nothing in it
    TN_active teach application when I open it on windows it says its not a valid win32 application and on mac side it switches to windows and says the same thing
    the link you posted BobTheFisherman was very helpful except for the fact that I need to install it first but I tried anyways and the indicated files had not been made yet.
    In the end though I've come to the conclusion that it is not a Parallels or mac problem but simply one of the software I'm going to look for other windows programs to test how they work though just to prove my hypothesis I thank both of you for your efforts on helping me.

  • Disp+work.exe running but meesage server unreachable

    Hi Guys,
    i was working around for the past 4 days. still i was not able to find out the solution for this problem. when i am trying to connect SAP Server through SAPGUI, it was not connecting. i cross check with SAP MMC in the process list only one process was running (Message service) remaing processes were stopped. but disp+work.exe was running but with error message as "Running but message server unreachable". as per my knowledge this may be problem with sapmsg.ini. plz let me know how to fix this problem.
    any help would be appreciated
    Thanks,
    srini
    Message was edited by:
            raj reddy

    hi ,
       plz help me .
      dispatcher is running but cannot be connected to the message server
    in dev_disp, the following error exists
    Wed Oct 09 09:38:56 2013
    *** ERROR => [DpProcDied] Process died  (PID:248  HANDLE:956  rc:0x0) [dpnttool2.c  147]
    DpHalt: wait for end of icman
    DpHalt: waiting for termination of icman ...
    Wed Oct 09 09:38:57 2013
    *** ERROR => [DpProcDied] Process died  (PID:2844  HANDLE:964  rc:0x0) [dpnttool2.c  147]
    DpHalt: not attached to the message server
    DpHalt: cleanup EM
    ***LOG Q05=> DpHalt, DPStop ( 2688) [dpxxdisp.c   11380]

  • Disp+work.exe running but  Message Server Unreachable

    Hi all,
      I am new bee to this forum. can anybody guide me about this problem. i was working around for the past 4 days. still i was not able to find out the solution for this problem. when i am trying to connect SAP Server through SAPGUI, it was not connecting. i cross check with SAP MMC in the process list only one process was running (Message service) remaing processes were stopped. but disp+work.exe was running but with error message as <b>"Running but message server unreachable"</b>. as per my knowledge this may be problem with sapmsg.ini. plz let me know how to fix this problem.

    Hi!
    I have same problem after installation SAPNW7. TrialSP12.
    I'm running virtual MS Windows SP2 using VMWare Workstation 8.0
    dev_ms is attached.
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 3436] Sat May 12 11:17:33 2012
    [Thr 3436] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    94
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        3432
    [Thr 3436] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3432) [msxxserv.c   1824]
    [Thr 3436] MsInitAclInfo: acl file D:\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
    [Thr 3436] MsGetOwnIpAddr: my host addresses are :
    [Thr 3436]   1 : [10.10.0.10] sap.localhost (HOSTNAME)
    [Thr 3436]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr 3436]   3 : [192.168.238.128] allon-51c22207c.corp.loc (NILIST)
    [Thr 3436] MsHttpInit: full qualified hostname = sap.localhost
    [Thr 3436] HTTP logging is switch off
    [Thr 3436] set HTTP state to LISTEN
    [Thr 3436] MsHttpOwnDomain: own domain[1] = localhost
    [Thr 3436] ms/icf_info_server : deleted
    [Thr 3436] *** I listen to port sapmsNSP (3600) ***
    [Thr 3436] *** I listen to internal port 3900 (3900) ***
    [Thr 3436] *** HTTP port 8100 state LISTEN ***
    [Thr 3436] CUSTOMER KEY: >I1895797210<
    [Thr 3436] Sat May 12 11:28:22 2012
    [Thr 3436] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.0.10) after 300 secs received [msxxserv.c   3165]
    [Thr 3436] *** ERROR => MsSCheckConnections: disconnect now [10.10.0.10] [msxxserv.c   3169]
    Regards,
    Olga.

  • When I reboot, why does NISerialRegistryMaintenance.exe run?

    This is a VXIpc-872B which was ghosted from another VXIpc-872B which has a successfully running application.
    We see the NISerialRegistryMaintenance.exe window pop up after reboot on the new pc, but not the previous.
    Maybe there's another setting we don't have correct?
    Thanks for help

    It's ok. We solved the problem by removing all the networking Protocol and Adapters on the new PC. Now NISerialRegistryMaintenance.exe runs, but very quickly so all we see is that the window pops up, then goes away. I take that to mean that it was timing out before. Which leads me to believe that the networking was set up differently between old and new PCs. Since we don't want any networking, we just got rid of it.
    Thanks.
    Margaret

  • Why is my ipod running diagnostics/sccessorize test when i didn't tell it

    why is my ipod running diagonistics and now stuck on accessorize test screen when i didn't ask for it to run it and how short of resetting and having to start over to get it to stop ? thank you, melissa

    Resetting the iPod won't cause you to lose any data.
    To reset, press and hold the MENU and SELECT (center) buttons until you see the Apple logo. This is how you exit diagnostics mode.
    Cheers!
    -Bryan

  • Why won't messages upload from the server? (IMAP)

    Thunderbird 31.4
    Win7Pro 64-bit
    Two Road Runner accounts on Time Warner server.
    Password matches the PW that works fine when using the Time Warner webmail interface.
    Settings suggested by TW Help staff. (But they know nothing about Thunderbird.)
    Same settings on PC laptop work
    I tried to set up two Road Runner accounts that I have been using for years when today I junked my Profile to start all over. I had been seeing the "Account already exists" error over and over when I tried to add a second account to any of my mail servers and people were reporting the only way to fix this was to start over.
    Horrible idea, i now think as I have put hours into reconnecting and I have not even been able to get Add-ons and Plug-ins back in place as the basics don't work.
    A Hostgator account and the G-Mail account are back up and running. For the Road Runner accounts, now a part of Time Warner, I looked carefully at settings that work on my laptop, but I see no difference. However, those settings during the set up are clearly not smoothly connecting. No Incoming messages appear in TB but they are on the server as the web interface provided by Time Warner works with the same password.
    However, the SMTP isn't right as I can start a message but it won't leave the client -- The send button is grey.
    Stumped.

    Next steps taken:
    I unistalled Thunderbird and ALL profile folders and files anywhere on my Win7 machine. Emptied the Trash many times and performed many restarts to make sure things stayed Deleted. I downloaded the .exe file for 31.4 (current) from the Mozilla website. Ran the install and this time was careful to try setting up the problem account first.
    Amazing: it DIDN'T work at all. The server settings are OK (Time Warner concurs) but the initial connection NEVER went through to either the incoming or outgoing server so the account is there but there is no stored password (I looked!) for me to change (as part of my troubleshooting). I then tried my domain-based account (HostGator) and that set up right away.
    Is there a clue to this problem in seeing that these road runner accounts never populate themselves in TB with the usual folders? InBox is established but not "Sent, Trash, Junk, Template, and Archive".
    Note: I am using Manual setup as soon as TB starts trying to probe the server. I already know the "results" are wrong.
    ...and again, TB can establish the connections and settings needed for other mail servers, like HostGator, GMail, etc.
    Help, please, I need ideas. What could be SO WRONG with Time Warner and this machine that this can't be configured. Note that I can get the mail for these accounts on my Win7 laptop here, so same TB program version, same accounts, same settings. same router, same WAN modem.
    I continue stumped. Please help!

  • Mac Mini Late 2012 won't boot running OS X Server Mountain Lion

    My Late 2012 Mac Mini with OS X Server ML is running perfectly - but when I reboot it from the menu's "restart" command, it just shuts down, then restarts showing the spinning wheel forever.
    The configuration is:
    Mac Mini running OSX Server ML
    Disk Utility says OK
    Update is 100% OK
    Connected stuff:
    - usb 2TB Seagate disk
    - wired LAN
    There's no connected keyboard, mouse, or monitor - running it remotely from nearby iMac
    I have tried all combinations wheen booting up.
    I even reinstalled OS X Server from scratch. No luck.
    Only resolution (that works once) is to restore everything using Time Machine. Then it runs fine until power off...
    So now I ask:
    Why does this happen?
    Could it be shutting down/restarting remotely that causes this?

    Open console in Applications>Utilities, check the system log for the date/time of the last problem  & the Startup right after that for clues.
    Or maybe try a Verbose boot... CMD+v

  • Why is FlashUtil64_17_0_0_169_ActiveX.exe running on my computer?

    Can anyone tell me why Adobe Flash Player behaves like Malware
    No this is not one of those fake immitators, I have scanned my PC and installed from Adobe.com
    What I am talking about is the way that Adobe launches an update process DESPITE the fact that I have told it NO UPDATES.
    What do I have to do to get Adobe to cease and desist from running programs on my PC WITHOUT Permission
    Adobe Flash Player Installer/Uninstaller 17.0r0
    http://i.imgur.com/O2zahbi.jpg
    I installed Flash on both Firefox and Internet Explore,
    Incidentally BOTH gave me an error saying
    "flashplayer17_ha_install.exe/SC/#168"
    but continued to install
    How do I KILL this thing once and for all from running without permission,  I cannot see it in Services or In Task Scheduler or MSConfig
    In control panel there is a Flash Player 32 bit) which is strange as I am running a 64bit version of Windows, when loaded it says
    "Flash Player Settings Manager"
    it has an Update Tab that says Notify me to install update,
    Well I do not mind Adobe checking once a day, I DO NOT want yet another process clogging up my PC, slowing it down, freezing my PC etc.
    So how do I get rid of this?

    FlashUtil64_xxx.exe is the ActiveX broker process.  There was a build system bug a while back that applied the wrong description string to the process during packaging.
    It's really the ActiveX broker, which is necessary for process separation (a security in-depth thing).
    I've opened the following bug on your behalf to get the description corrected:
    https://bugbase.adobe.com/index.cfm?event=bug&id=3980376
    I also updated the title to more accurately reflect the issue and help others with similar questions.

  • Why won't GameCenter connect to the server?

    So I was playing Temple run and it said that it couldn't connect to gamecenter. after logging out and trying to log in again it said it couldn't connect to the server? I'm using iOS 4.3.1. Is this normal or what should I do?

    Hi there aprzewoznik,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    -Griff W.

Maybe you are looking for