Why won't files go to the trash

When I try to drag files to the trash a box opens and just continues to say preparing to move to the trash. I tried to empty the trash but it says it is open by another process. What can I do?

http://www.thexlab.com/faqs/trash.html

Similar Messages

Why won't files open in the space that the application is assigned to?

I have applications assigned to specific spaces, however, if I am in space 2 and I click to open an Adobe Illustrator (assiged to space 3) file, spaces will send me to space 3 but the file window will open in space 2 (where I was). I have to use F8 to view the spaces and drag it over to the assigend sapce. If i try to work on it in spaces 2 (where it opened) my pallets are blank. Any ideas?

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT202152 I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help

I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.

For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
In Photos:
File ▹ Show Recently Deleted ▹ Delete All
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Why won't files open in Camera Raw from Bridge?

I am trying to open files in Camera raw from Bridge but get the following message.
"Bridge's parent application is not active."
Both Bridge and CS5 are open and I have opened camera raw previously.
Any suggestions.
Cheers

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why won't files open or save in email

I have been trying to open some important files that were emailed and they won't open. I am getting the blue and white pop up asking if I want to open or save and it won't let me do either. It did this the other day and somehow I finally got it open after shutting down the computer. Tried that this time and it won't work. Tried uninstalling and reinstalling adobe. It did not work. There is also an online website I use to complete and upload PDF file documents and it won't work either. What has happened? How do I fix?

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why won't AirPort Connect to the internet?

The green indicator light is on, why won't AirPort connect to the internet? Here's my config http://localhostr.com/files/cfee4c/Problem.zip

Hi Stress Test:
Thanks very much for the reply. I've actually sorted out the problem since posting - just a few minutes ago. I reset the AirPort and reconfigured everything in manual mode with the ethernet cord from my computer connected to the AirPort. I then disconnected the ethernet cord, rebooted the modem and AirPort, did a bit more troubleshooting and suddenly I was connected to the Internet! Still not sure exactly what I did that fixed the problem, but everything is working ok now.
Regards,
John

Why won't Apple give out the unlock code for an iPhone 3Gs when the contract was honored and I am still an AT

Why won't Apple give out the unlock code for an iPhone 3Gs when the 2 year contract was honored and I continued to be an AT&T customer with an iPhone 4. I wanted my old 3gs unlocked so my daughter could use it overseas when she is deployed. AT&T service over there *****, the international plan was not worth it. The individual SIM cards per country are much more reliable and cheaper. Teslestial in Iraq and Afghanistan, Telecom in Croatia,Vodafphone in Germany and Italy. Why Apple will not unlock these phones for our military to utilize is incomprehensible to me. These young men and women are fighting for these Apple people to go to work every day, safe, to live lives they have become accustom to yet releasing a phone to use on another network they can't do at least for the military.... WHY APPLE?? WHY? A good excuse not some of the many lame excuses I have received on the phone many times. AT&T states it is Apple that will not allow them to unlock the phones... Please tell me why? All I want Is my daughter to have a phone I trust, to be able to call me when she is given the free time to do so and I trust the apple phone.
Apple, please reconsider your stance on this issue. I am having a hard time understanding why you will not unlock the iPhone.
A simple code could allow me to talk to my daughter while fighting for our country the Great USA. Apple should be on the front line and enabling those fighting for our life, liberty and pursuit of happiness to use unlocked phones on reliable local GSM networks.
I honestly hope that someone who has some sort of authority to begin allowing the release of unlock codes, and not forcing people to unlock their phones with some program produced by some hack just to be able to use your wonderful phone. That is is in a nutshell, People love the iPhone so much that they want the ability to use it on the most reliable GSM carrier available to them. That should be a major compliment. Even men and women on the front line want your phone. I agree, my service is not the best where I live either, love the GSM technology so stay with it, but if I had the ability to change to the other GSM network that has much better coverage in this area of the country I would change. To change now I would not have my iPhone and that I will not part with.
Apple, please reconsider opening up the lock code and allow your gem of a phone to be used by many more people in many more areas and most importantly overseas fighting for our country. I know if this is really thought about Apple would understand and come to the conclusion to release the unlock codes, and stop the people from hacking in to use the iPhone on other networks.
I would love for my daughter to be able to use my iPhone 3gs while fighting for our Free country.
A response would be appreciated.
Thank you.
An Apple customer for 10 years, phones and computers.
P

Defiled:
I did sign a two year contract and completed that contract. The 3gs is no longer in service. My daughter is going overseas to protect you and your family. I was attempting to find a way for her to have a reliable phone that could offer her some connection with home as she travels through the middle east. She travels in missions all over.
At&T unlocks other phones of theirs why not the iPhone? AT&T says that Apple will not give them the code, it is not the carrier. If I would have known this situation would have come up I would have bought and unlocked 3gs phone"Deggie" . My main complaint is that Apple has not good excuse as to why they will not allow their phones to be unlocked from services well, AT&T . I bought the phone full price, completed the contract terms, even went for and iPhone 4 with another2 year contract, along with owning an apple computer... I love the product. My main issue is give me a good answer as to why you won't allow a phone to be unlocked. It doesn't hurt Apple, People still have to buy the phones from them, and use their App store and iTunes.
Sorry, just upset about my daughter heading over there, boots on the ground, and just pray she will be safe. Would have liked to facetime her while she is in the airports and in specific areas allowed for that.
Please don't come down on me for asking this question. I understand all the contracts etc.... but to single out the iPhone specifically to not unlock after contract is over does not seem fair.
Thank you for your responses.

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

HT4591 Why won't Motion give me the update to 5.0.7?

I'm running Snow Leopard and Motion 5.0.4. Software Update doesn't list anything for Motion, but the release notes say it's up to 5.0.7! Why won't Motion give me the update to 5.0.7?

Thanks! The problem I had was that I simply needed to download a new version from the App Store. I had honestly completely forgotten about the App Store. I'm on 5.0.7 now.

HT2801 Why won't Windows 7 recognize the super drive?

Why won't windows 7 recognize the super drive? I have set up and it was working yesterday. I added a usb hup and a HDMI - Vga adapter to run two moniters? When I booted everything up again I found out that windows would not reconize the super drive. When I an running OS X, I have know issues.

You tried everything here:
iOS: Device not recognized in iTunes for Windows
including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
What does diagnostics show?
iTunes for Windows: Gathering and using iTunes Diagnostics

Can not copy any file or empty the trash

Hello,
I'm using a Macbook (white) with OSX 10.6.4 and am having an extremely annoying problem which has three symptoms:
1. I *can not empty the trash* (safely or not) at all.
2. I *can not copy any file*, anywhere.
3. I *can not move anything to the "Applications"* folder.
I try restarting the computer, repairing the permissions, running the latest version of Onyx and so on, but nothing works. I always get the following error message (when copying a file or emptying the trash)
"The operation can't be completed because you don't have the permission to access some of the items".
And this even though I repaired the permissions three times today.
To be honest, this makes my Mac pretty useless, and is very frustrating.
Can anybody help? I've browsed a lot of other threads about this, tried everything, but to no avail.
Come on, this is my first Mac, don't tell me I have to reinstall the OS from zero, Windows-style.

Those are the normal permissions but if you are logged in as admin, hit the unlock button and enter your password they should no longer be greyed out.
You can try chmoding them from root through the terminal if you are up for it. I'd also try booting up in SafeMode and seeing if that allows access.

Does Any one can indicate me how to delete recovered files found on the trash can?

I´ll appreciate very much your help indicating me the best way to delete recovered files found on the trash can.

The Getinfo pane has several sections. Next to the top is "General". At the bottom of that section, under the row of colored dots is a checkbox, [√] Locked (and not checked means not locked).

Accidentally I have deleted my Time Machine Backup but deleted files are in the Trash !

Hi Folks,
Accidentally deleted my Time Machine backkups but all files are in the Trash. I am copying my files from Trash folder to another Portable Drive just incase I will not be able to restore my files as Put Back is not working because seems Time Machine backups is a part large database.
Is there anyway I can restore the files to Time Machine again? If there is, could you please tell me step by step ! If there is not any procedures, please advise me what should I do in this stage?
Thanks in advance.

The following excellent Support articles may help you with that:
http://pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html

I don't have a computer on which to convert a digital booklet in iTunes to a useable form for iBooks. Why won't it download using the cloud like all the other media I purchase on my ipad?

I don't have a computer on which to convert a digital booklet in iTunes to a useable form for iBooks. Why won't it download using the cloud like all the other media I purchase on my ipad?

LP content can only be downloaded on a computer's iTunes (or 1st gen Apple TV), you can't download them on an iOS device - and I haven't seen anything that say it will change in iOS 8. If you don't have a computer then at the moment you won't be able to download/view LP content
About LP : http://support.apple.com/kb/HT3823
After you buy an album with iTunes LP on an iPhone, iPad, or iPod touch, the album's songs will download directly to the device. The iTunes LP will download to iTunes on your computer when you choose Store > Check for Available Downloads.

FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

FM Transmitter used to work fine but stopped working, bought 2 new ones and neither work, they work with other Ipods in the house, IPOD Usb syncs fine with Computer, why won't it work with the FM transmitters anymore?

Are the other iPods models, same version as yours. The 2 New FM Tx may need a new iPod software, which you can update via iTunes.
Good Luck!

Why won't files go to the trash

Similar Messages

Maybe you are looking for