Why won't Finder open some folders in List view?

I cannot open some folders in Finder when it's in List View. For example, I have an external drive divided into 3 volumes: Ext A, Ext B, and Ext C. B & C open fine when I double click: A will not open at all, although sometimes Finder will open a blank window. If I click on the volumes in the Finder sidebar I get the same results. BUT if I switch to Column View it opens OK. Is this a bug or is there something wrong with my folder? (All volumes above have identical permissions.)

Thanks for the suggestion. I ran the disk verify utility and all the volumes checked out OK. It has also happened with one folder of the internal hard drive. I ended up copying all the data from that folder and putting into a new (re-named) folder, and deleting the original. The new folder was accessible OK.
It must be something to do with that one folder??

Similar Messages

Finder problem-can't sort some folders in list view

Hi,
I have a problem with some of my folders in Finder. I prefer to use 'list' view when working in Finder. However, in some of my folders the item bar is greyed out and I can't click the bar to sort. From the image below, the left image is the folder in question; the right is the normal view that I like to work in where I can click on the bar to sort items.
I'm not sure why this is happening, so could somebody shed some light on this please.
Thanks.

I had the same question. Credit goes to http://superuser.com/questions/339525/os-x-lion-new-finder-view-that-doesnt-allo w-sorting for the answer.
If you have a window that is in this state, first click the title bar to make sure it's the "active" window, then go to the "View" menu, then click "Sort by..." : None.
Make sure "None" is active, then you can sort just like it's 1984-2010.

Some folders in list view, others in cover flow?

Is it possible to get the Finder to remember a view preference on a folder-by-folder basis?
Some folders, like those containing media, are really nice in cover flow.
Others, like those containing programming source files, are easiest to deal with in list view.
Thanks,
doug

Open the folder. Set your preferred view mode for this folder (hit Command-1, Command-2, Command-3 or Command-4). Select Show View Options from View menu (or hit Command-J). From the options window that appears, set any other view options you would like. Then click the "Always open in..." check box at the top of the options window. The next time you visit this folder, it will come up with the view options you have set. Well, usually. There's some kind of bug that makes this less dependable than it was under 10.4.

Why won't files open or save in email

I have been trying to open some important files that were emailed and they won't open. I am getting the blue and white pop up asking if I want to open or save and it won't let me do either. It did this the other day and somehow I finally got it open after shutting down the computer. Tried that this time and it won't work. Tried uninstalling and reinstalling adobe. It did not work. There is also an online website I use to complete and upload PDF file documents and it won't work either. What has happened? How do I fix?

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why can I not open some attached emailed pdf files?

PLEASE HELP ME! I HAVE TO OPEN THESE FILES MY BUSINESS DEPENDS ON IT! why can I not open some attached pdf files and others are ok?

PDF files are extremely reliable. You may have a software issue. I have the problem on 2 identical systems with the exact same specs. The problem occurs at the same exact interval. It may be a windows update. We have had to re-install software form the DVD in each instance. This fixes it for awhile and then it recoccurs. Adobe acts as if they have never heard of the problem...imagine that. I'm the only one with th problem.
This is happens with CS6 volume lic product.
If you dont own Adobe product it will be even more difficult to find and answer as the reader is used my so many people.
We know we have the problem again when we double click opn a PDF and nothing happens. SOme have reported that reloading does not fix the problem.
Wish I could help you. I am looking for answers to this issue right now and phone support is a 30 minute wait.
Very frustrating.

Why won't files open in Camera Raw from Bridge?

I am trying to open files in Camera raw from Bridge but get the following message.
"Bridge's parent application is not active."
Both Bridge and CS5 are open and I have opened camera raw previously.
Any suggestions.
Cheers

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why won't files open in the space that the application is assigned to?

I have applications assigned to specific spaces, however, if I am in space 2 and I click to open an Adobe Illustrator (assiged to space 3) file, spaces will send me to space 3 but the file window will open in space 2 (where I was). I have to use F8 to view the spaces and drag it over to the assigend sapce. If i try to work on it in spaces 2 (where it opened) my pallets are blank. Any ideas?

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I can't open some folders anymore

Hi everyone
Since some couple of months, i can't open some folders on my macbook air and pro anymore. when I try to open some folders, than every icon disappears, and I am at the some place I was before. The folders exist, because when I try to open some files from the search bar, it works, but I can search the files into the folder!
Did anyone have a similar problem?
tx

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process (Finder). For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

TS3276 why can't i open SOME attachments from email and most of the time i can open them?

why can't i open some attachments from some emails and not on others?

Read this link from Apple for more info:
http://support.apple.com/kb/PH11778?viewlocale=en_US&locale=en_US
The Apple Communities is a free information resource, but posting the eventual answer helps future users to learn solutions.

After connecting to Internet, clicking Mail icon, why won't Mail open?

After connecting to internet,clicking Mail Icon, why won't Mail open?

Try opening Mail from the Applications folder. Your Dock icon may be damaged.

TA21041 I can not open some folders and get not have permission to open the folder

I can not open some folders and recieve the message: you do not have permission to open this folder. how I can solve it?

Select that folder, choose Get Info from the File menu, and give yourself read access under Sharing & Permissions. This shouldn't be done on folders in system directories.
(66976)

Why I can't open some video in my facebook?

Why I can't open some video in my facebook?

Hi Chris.
Ok every son gneeds artist and album, but why in my 20 G photo Ipod I can see the songs searching via artist without any problem. And why in the new 30G video Ipod it only happens with some artists, cause for example I have 40 u2 songs, some with album name and some not, and all of them appear searching via artist. But with another artist, for example def leppard, I have 15 songs (some with album name, and some not) and searching via artist I can see only the ones in some particular album, and others that also have album name dont appear unless I look for them via song

Why can't I open some of my documents on Pages even though I created them all on the same IPad with the same Pages ap?

Why can't I open some of my documents on Pages even though I created them all on the same IPad with the same Pages ap?

I think I know the problem because I've had it myself. I didn't upgrade iWorks on my iPad, but after Apple made changes to iCloud (concurrent with Mavericks) any docs passing through it were modified and made unreadable. Even though, as you say, they were created on my iPad using the previous version of iOS Pages, which I didn't upgrade.
iCloud is the culprit, if your iPad settings had iCloud>Documents & Data enabled, the docs were modified and disabled in the cloud.
I made a further mistake. After I saw this happening, I didn't think to turn off auto updates, and Apple pushed the new version of iOS Pages onto my iPad. The result was that ALL my docs disappeared from the iPad, and from iCloud.com also. I have not been able to recover them.
I've been talking to the Pages engineering team about it. If they come up with an answer, I'll post it here. Meanwhile, get those older files backed up somewhere safe if you can.

Why does Safari not open some youtube sites?

Why does Safari not open some links I'm sent via e-mail?

Why does Safari not open some links I'm sent via e-mail?

TS3927 Why won't itunes open after latest update?

Why won't itunes open after the latest update?

See iTunes launch errors caused by iAdCore.dll.
Review the rest of the user tip if required.
tt2

Why won't Finder open some folders in List view?

Similar Messages

Maybe you are looking for