Why won't iChat start hidden?

It's a small irritation but one that's been with us since the very start: I have iChat in my list of Login Items with the Hide checkbox checked. iChat starts all right, but the icon goes into it's hidden (dull) state for a fraction of a second during iChat start up before iChat bursts into life and onto my desktop in a decidedly unhidden state.
Aside from assigning iChat to a distant desktop using Spaces, has anybody actually cracked the simple-sounding problem of getting iChat to start and stay hidden?

Hi,
Try also Hiding iChatAgent.
iChat Also "Remember" where each window was when iChat is Quit.
Closing A Buddy List Window (Red Blob Button) does not Log that Buddy List out but "Hides" the window. Therefore iChat will start up with no windows on show.
There was a thread recently where someone was having problem with iChat and Spaces.
Something about the way iChat is means that even if in another Space a New Invite arriving brings it to the Front and Current Space as well.
This may have been to do with Chax (an iChat Add-on that can set any iChat Window to be "Always in Front").
It may also be to do with the Dock and this being in any Space.
10:33 PM Monday; September 28, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

  • Why won't iChat let me add a new account?

    I recently deleted my iChat account and I do not want to use Bonjour List. I am on the administer account and there are no other accounts created on my computer. Parental controls are also not on. Why won'y iChat let me add a new account, I am trying to add my AIM account. If you could please help me.
    Thank you,
    Brooke Russell

    Are you in a newly defined Local Site Folder?
    Which operating system?
    Which ver and build # of DW are you using?
    Nancy O.

  • Why won't iTunes start on my Windows 7 laptop?

    Just installed from the iTues web site, and it won't start.  Anyone have ideas as to why?

    1.  try cleaning first:  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    2.  if that fails, check your install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

  • Why won't photoshop start

    i just bought and downloaded Adobe Creative Cloud and Photoshop CC today but photoshop won't start. i have the little thumbnail at the top of my  home screen and i clicked down load photoshop so I'm not sure what I'm missing.

    Did you get a message saying that it completed installation?  Until all 3Gb of Photoshop CC are download and installed, it won't start.
    Also, on a Windows machine or Mac machine you usually have to answer a dialog box to allow the installation to proceed. Sometimes those pop-ups take a long time to show up... and sometimes an accidental key press answers "No".  If you answered no or dismissed the install dialog, Creative Cloud Desktop usually shows a "Failed" message.
    Finally the "Icons" on the Creative Cloud Desktop cannot be used to actually LAUNCH the application. You will have to do that in the "normal" way for your computer.

  • Why won't iTunes start?

    I bought a PowerMac G5 and it came with OS X 10.5.8 pre-installed. I used that for a while till I got my hands on a retail Leopard disc. I wiped the HDD and did a clean install, and now iTunes won't start. It says there's not enough memory available, which is weird because all other applications start just fine. I wiped my Swap, verified and repaired disk permissions with the installer disc's Disk Utility, and have no clue what else to do. It can't be a RAM issue, I have 3GiB installed and it won't work when all else that's running is Finder.

    Open Console in Utilities & see if there are any clues or repeating messages when trying to open iTunes.

  • Why won't iWeb start? help!!

    Everytime I double click on the iWeb icon, it starts to load, but then I get an error message. I have tried it repeatedly and get the same result. I did some house cleaning recently, but I only through away documents, I wasn't moving anything around in the application folder.
    Help!
    iBook G4   Mac OS X (10.4.8)  

    I am having the exact same problem. The only thing that I can add is that I just moved over from a G4 iMac to an Intel Core 2 Duo iMac. I used the Apple utility to set up my new iMac via a FireWire cable and it worked wonderfully, except for iWeb.
    When I attempt to start iWeb, I get "The application iWeb quit unexpectedly" error. I have tried bringing over my plist files and Domain.sites file all over from my original Mac a couple of times but it still does not work.
    My original Mac is:
    iMac G4 1.25 GHz
    OS X 10.3.9
    iLife 6 with all the updates (iWeb 1.1.2)
    My new Mac is:
    iMac Intel Core 2 Duo 2.33 GHz
    OSX 10.4.8
    iLife 6 with all the updates (iWeb 1.1.2)
    Because it still works on my old Mac (even now) I'm not convinced any amount of deleting will help me.
    Don't know if this requires a new post, but I hope this information helps someone to figure out what the problem is.
    Thanks.

  • Why won't it start up?

    One day my MacBook started acting Really slow and the dock would never really show up, which suggested that the computer didnt fully startup. I saw somewhere that you should press shift during startup, and so I did. That only made it worse. Now it will just show the apple logo and then display a progress bar at the bottom of the screen. The bar will never fully fill, but it will turn off the computer everytime. I can't figure a way around this. I've concluded that the harddrive is experiencing some kind of failure. I tried to repair it in disk utility, but it could not be repaired. Any Advice?

    ifan64,
    if your hard drive is failing, my advice to you is to backup any valuable data on your hard drive as soon as you can. I’d also recommend the purchase of a new HDD or SSD for your MacBook; once it’s in your hands, format it, install OS X on it, and transplant it into your MacBook. When that is done, restore your valuable data from your backup onto the new drive.

  • Why won't firefox start after updating to version 6.02

    When I try to open Firefox,An XUL Runner dialog box opens, and gives comment of:
    Platform version '6.0.2' is not compatiblw with
    Minversion >=6.0.1
    Maxversion <=6.0.1
    And that is all I get. I click OK, the box closes, and firefox doesn't open. Only started after new firefox version automatically installed.
    What is going on

    Download latest Firefox version using one of these links:
    * http://www.mozilla.com/en-US/firefox/new/
    * http://www.mozilla.com/en-US/firefox/central/
    * http://www.mozilla.com/en-US/firefox/fx/
    * http://www.mozilla.com/en-US/firefox/all.html
    Uninstall your current Firefox
    * https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
    * DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
    * Restart your system
    Install Firefox using the downloaded & saved Firefox installer file
    * https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
    Check and tell if its working.

  • Why won't TITLE start at beginning of clip?

    In I-Movie HD 6.0, when I insert a title onto a clip, there is a delay of several seconds before the title is exhibited. Why? How to change this?
    Also, can't put title onto a clip containing a transition. Must I split the clip and THEN add the title?

    Hi, Bob,
    When you set up your titles, there are sliders under the preview window that will let you change the Speed and Pause. Remember that some Titles already have actions built into them that cause fading, so choose wisely.
    Yes, you can split the clips and put the Title in just one part, but make sure that the lenght of the new clip is longer than the duration of the Title transition.(Little numbers in the bottom right hand corner of the preview pane)
    Clay

  • Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content.

    Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content. This comes up on all of my computers. I reset the Apple TV to Factory Settings and still get the same message.

    Hi There,
    I had the same problem took me several hours to try and sort it out but nothing worked.
    I then went to the following apple link
    http://support.apple.com/kb/TS5376
    Follow everything to a T and you will get the use of your Itunes again.
    Hope this helps. Good luck (And remember to breath lol )

  • My G4 desktop won't  cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why?

    My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why? Otherwise, the desktop runs fine.
    The battery is new, and I zapped the little button on the main board once. I've noticed that the power supply plug is a little longer than the usual one for G4, and the AGP slot has an extra slot, which is black and about half inch long.

    Hi Ursula,
    the AGP slot has an extra slot, which is black and about half inch long.
    I believe that is for ADC Monitor power if you had one, or a card with ADC, like the little tab on this one...
    I think your startup problem is bad capacitors in the power supply or on the logic board, and the need to bleed off their charge before they work right to start.

  • HT1926 Why won't i tunes start in Windows 7 64 bit?

    Why won't i tunes start in Windows 7 64 bit?

    Got it working, had to go to the start menu and do a search for "Apple Software Update" and update Quicktime - had an old version that wasn't getting updated. Itunes works without problem now.

  • Why won't OS X Mavericks start downloading when I click the download button? It thinks and acts like it starts downloading with the thinking circle moving then stops and goes away. I have tried going to the purchases in the app store and restarting it the

    Why won't OS X Mavericks start downloading when I click the download button? It thinks and acts like it starts downloading with the thinking circle moving then stops and goes away. I have tried going to the purchases in the app store and restarting it there and that is not working either.

    Repair permissions, restart your computer & try again. 

  • Why won't my iChat recognize my iSight or allow me to share my screen??

    I just downloaded the new Lion OS X update and everything looked great......the one thing that caught my eye was that iChat won't let me video chat or screen share.  Prior to the update I was able to do both with ease.....I really don't know what to do and I need help pleeeeease and thank you!

    HI,
    When iChat Starts up it "reads" the Internet Speed it can see and writes this to it's .plist
    If you have iChat set to launch as a start up or Login item or are using Lion's ability to re-open apps that were open on Shut Down then iChat may start up faster then the computer gets fully connected.
    iChat "Needs" a connection speed of at least 128kbps to make a 1-1 Video Chat.
    If the iChat Menu > Preferences > Video Section > Bandwidth Limit is set to 100kbps then you may also get the red crosses in the Connection Doctor info.
    Screen Sharing also needs a 128kbps service or better.
    For 3 and 4 way Video chats you need at least 384kbps (both Upload and download)
    The Port Restricted amber blob is not the cause of the red Crosses.
    It also will not mean that you can't Video Chat.  (This "report" has been there since iChat 5)
    Do a Speed test and report back the Upload as well as download speed.
    http://www.speedtest.net/
    Try quitting iChat then re-launching it  (Separate from Start up).
    The Camera is a different issue.
    Does Photo Booth "See" the Camera ?
    Does it appear in Quicktime Player so you can record ?
    If not does it appear in the System Information (Previously System Profiler) ? (it will be in Hardware > USB)
    9:48 PM      Tuesday; January 10, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • Why won't a cd download start automatically

    why won't a cd download start automatically? I double click and terminal opens, nothing happens. I have Lion OS, trying to install software...

    stedman1 wrote:
    In this it certainly DOES mean the OP has this version, as stated in the first post.
    Stedman
    I am sorry but that comany has both Windows and Mac versions. And no where in the OPs first post does it say I am certain I have the Mac version.
    Other then that I don't understand what your problem is with my post. Just trying to help as you are and really don't need your sarcasm on a Saturday morning.
    Thanks.

Maybe you are looking for

  • Programmatically creating a Rendezvous : missing variable in Result container

    Hi everybody, For my tests purpose, I need to programmatically create a sequence. In this sequence, I need to insert Rendezvous steps. Everything works fine when creating them, but when I execute the sequence / steps created this error always show up

  • Request code doesn't work...

    I downloaded Premiere Elements 12 and Photoshop Elements 12 about a week ago (they were on the same disc).  My computer is not connected to the internet (my parents don't want me surfing) so I have to use offline activation (obviously I am not using

  • Use of Cursors in HANA SQLScript

    Hello Experts, I have a scenario where I need to use 2 cursors and the cursor declaration is done in  a different Begin-End block and the cursor is being accessed in a different Begin-End.How can we achieve that in SQLScript and also Can we have a re

  • Smartform Next page error

    Hi Experts          I have done a smartform inwhich i have two pages.         while display, i have calculated a field discount, which displayed in the first page correctly,  but in second page it is not displayed properly.          what could be the

  • Photoshop CS6 smart objects on Mac

    I recently upgraded to CS6 Master on Mac Mountain, and noticed that smart objects in Photoshop don't open in their respective applications. For example, when I double-click on the smart object, they open in Preview instead of Illustrator. How do I pr