Why won't images from Aperture sync to iPhone or iPad?

Hi
Whenever I try to sync impages in my Aperture library to my iPhone or iPad I get en error message:
iPhone - The iPhone "iPhone" cannot be syned. An unknow error occurred (-50)
iPad - The iPad "iPad" cannot be synced. The required file cannot be found
I have repaired my library and previews have all been produced and I can access them for other app like iWeb so I'm a bit baffled by this one.
Any ideas?
Thanks in advance

Forgot to mention - iPhoto library synce just fine

Similar Messages

Why do my photo stream not sync between iPhone 4S & iPad? Some pics do but not all

Why does the photo stream not sync between iPhone 4S & iPad? Some pics do, some don't.

Welcome to the Apple Community.
    1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    2.    Photostream only syncs when the camera app is closed, ensure it is closed.
    3.    Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

I cannot sync my pictures from aperture to my iphone or ipad anymore

Hi All,
Since I updated MacOS to 10.9.2 and the latest version of Aperture (3.5.1), I can't sync my pictures to my iphone or ipad. Every time I do so, I have a message saying "couldn't complete synchronisation, an unknown error occured (-50)"
Every time an uncheck the pictures sync, the synchronisation goes well.
I have tried the following method http://www.edtechhacks.com/2007/12/solved-itunesiphoto-sync-error-50.html to no success.
I have tried all of the error (-50) discussed on the forum to no success (clearing my aperture ipod cache, etc.)
I do not know what to do. any idea or suggestion as I am now with my ipad and no more pictures on it.....
Thanks for the help.
rgds
My system: MacBook Pro 13", macOS 10.9.2, Aperture 3.5.1, Iphone 5S 16Go iOS 7.1, Ipad 3 128Go iOS 7.0.6

create a new Aperture library, add a few photos, and quit Aperture. Then try to sync again. Can you sync with this new Aperture library?
When you tested with a new Aperture library or iPhoto library, was this library also referenced to your external drive?
I'd try to test with a new local library, to make sure that the external drive is not causing the problem.
Also, since both iPhoto and Aperture are having the same problem, it might be a problem of the iTunes library and not your photo libraries. Do you have a second iTunes library that you could switch to for testing?

Why aren't the images in NOTES syncing to iPhone and iPad?

In Mountain Lion we can now include images and such in our notes. Should they sync to our devices as well???

I'm only seeing a paperclip icon on iPhone and iPad. Also there seems to be no way of viewing the image indicated by the paperclip. There is also no way I can find to insert an image into a note on the iPhone or iPad so this lauded feature seems a bit redundant.

Why won't Outlook 2011 Contacts sync with iPhone Contacts?

When i left a previous company i wanted to keep my outlook contacts. To do this i exported them from the company PC into a .PST file. I was then given a MacBook Air at my current company and wanted to import the contacts from the .PST file to my outlook (Outlook 2011). This was fine and i have my old contacts on my new work MacBook. My problem is that i cannot get the contacts to show in my iPhone 6 (company phone) contacts. When i go to itunes, then my device and contacts i am given the option to sync contacts from different places. The only place that comes up is OWA and there is no option to sync the .PST file that is on my outlook. I need to be able to sync these so that if i add a contact at the office on the mac or if i add a contact on my phone when out meeting a client that they then appear on both devices no matter which one it was created on.
Any help on this would be greatly appreciated.

I did what you said and everything looked and worked perfectly...except the events still aren't showing up on my iPhone even though they are in Google Calendar. How much time does it take to populate the iphone calendar with the events from the just added calendar? I changed the settings a couple of hours ago.
Thank you!

Why won't my calendar apps on my iPhone or iPad notify me of an invitation?

If I send calendar invitations on icloud.com, it works just fine. All invitees get the badge icon overlaid on their calendar app icon, and it is sitting in the calendar inbox. When I try sending an invitation using an iPhone or iPad, it does not work.

Hello --
Any luck on this? I'm having the same issue ... We have a CalDAV server, and everything else works as expected.
I really need my event invites to appear in the Calendar inbox. It's getting really frustrating having to go find the invite wherever it may be, just to accept or deny.
Thanks.
~Laz

Low-quality iPhone images from Aperture 2.0

Hi. I'm trying Aperture 2.0, and I configured iTunes to sync some photos from Aperture with my iPhone.
The problem is, the photos on my iPhone from Aperture are noticeably lower in quality than those synced from iPhoto. The images are blurry and look like low-quality JPG's.
In Aperture's preferences, I set the preview quality slider to maximum and set the limit preview size menu to "don't limit". Still, the images on my iPhone are of poor quality.
Is there anything I can do to make the images Aperture exports to my iPhone look as good as those synced from iPhoto?
Thanks!

It seems that Ap2 syncs the previews to the iPhone... you have to clear the previous cached previews before it will load higher quality previews... anyhow, here is what I did... and photos look better on my iphone (not feeling motivated enough to verify if it is the same quality as iphoto sync)...
1.) change Ap2 prefs for "limit preview size" to "don't limit"...
2.) select all the photos in the album(s) you are want to sync, right click (ctrl click), and select delete previews...
3.) sync your iphone again...
if that doesn't work directly, you might need to uncheck sync photos to delete all photos on the iphone, but the ultimate goal is to ensure refresh with the higher quality previews...
Hope that makes sense or gets folks in the right direction... Apple really needs to put a check box in future version of itunes to sync full quality or something...

Use image from Aperture in Xcode image well

Is it possible to extract an image from Aperture and display this image in an Xcode image well?
I have a script that searches for and extracts a required image in the format:
image version id B4bCHCfeR969OQ7SEcUsOQ of library id LibraryFolder
I now want to display the image in an ApplescriptObjC project, how do I build a path to the image well?
Hope this makes sense, as usual, any help gratefully received.

Frinton Fogey wrote:
I have been trying to use that same script but changing selcting an image to searching for an image but it won't work, please show me the error of my ways!
set theImage to "Image 1"
tell application "Aperture"
          set ims to every image version
          set names to {}
          repeat with i from 1 to count of ims
                    set n to get the name of item i of ims
                    set names to names & n
          end repeat
          set imageSel to first image version whose name is theImage
          export imageSel using export setting "JPEG - Original Size" to (path to desktop)
end tell
Giving this a closer look you could condense the script down to
set theImage to "IMG_08067"
tell application "Aperture"
          try
                    set imageSel to first image version whose name is theImage
          on error errTxt number errNum
                    display dialog "Error: " & errNum & return & errTxt
                    tell me to quit
          end try
       export imageSel using export setting "JPEG - Original Size" to (path to desktop)
end tell
You don't appear to be doing anything with the repeat loop or variables and you're always taking the first image you find with the name.
So here we look in the whole library for an image with the name and if we find it we export it. The try/error block is to catch times that the name you are looking for isn't in the library.
regards

Need to Export All Images from Aperture to Photoshop. Can anyone help?

I'm new to Mac. Just got my iMac in January. I wanted to buy the Mac version of Photoshop Elements 8, but the Apple salesperson convinced me that Aperture 2 would be much easier. After three months, I've discovered that Aperture is just not for me. I just purchased and installed Photoshop Elements 8 for Mac today. I would like to move all of my images from Aperture to Photoshop and delete Aperture from my computer. I cannot figure out how to do this. Whenever I try to export, the Aperture "library" appears as a big block that won't open or prompt for subfolders. Please help!

Pvonk has good advice. I just want to make sure you understand the Aperture has a Master and at least one Version of each image file. The Master is the original -- never touched. The Version is at first a copy of the Master, but as soon as you make any changes it holds those changes. So you have to decide whether you want to export the Masters, the Versions, or both (which you'll have to do separately, afaik). Aperture gives you the choice. Click "Photos" in the Library tab of the Inspector, then select all, then "File>>Export". If you want to maintain your groupings (e.g.: Projects), you will probably have to select the images in each group and export them as a unique set.
Note that Aperture is a very powerful image database (pros refer to this as "Digital Asset Management") in addition to (w. v. 3) being a very powerful digital photograph development lab. Photoshop Elements does none of the former, and a very different kind of job than the latter.

Why won't my album artwork sync to my iPod Touch but it shows up on iTunes?

Why won't my album artwork sync to my iPod Touch but it shows up on iTunes?

Ok I had this problem, and for me at least what happened was that not all the album artwork was attached to all songs on the album. So if you right click one of the albums you are having an issue with, the click artwork tab, and go through each song on the album, if it is missing from any of them it will not sync properly to any device. Find the songs that have the artwork, and then right click to copy it, then go to songs without it, and right click in the blank box and paste it in there. Then once finished with any issues you are having sync iPod, this should fix the problem. It worked for me, and it was unbelievably frustrating to know I have the artwork, but it wasn't showing up anywhere on the iPod. Hopefully this fixes the issue for you, like it did for me!

HT4007 How do I export images from Aperture to my iPad Mini?

How do I export images from aperture to my iPad Mini?
Berndpeter

I am going to give it a try.
Greetings from Mexico!

How do I remove images from aperture?

Totally new to apple and aperture so I apologise if this seems like a somewhat noob question but how do I remove images from aperture (using the latest version, 3.4.1)? Coming from a PC and using lightroom I'm used to being able to remove images in two ways:
- removing the image from the "library", so that it no longer shows up in the program at all but is still on your hard drive (when I say removing it from the program entirely, I mean entirely, i.e. not sitting in a trash can or some other place where it's still taking up memory)
- deleting the original image off the hard drive
Is it possible to do either of these things in aperture, on both just a single image or a selection of multiple images, and if so how? I've tried googling this already and am getting a bunch of mixed solutions, none of which have really worked so far, so any answers would be appreciated. Thanks!

The answer partially depends on whether you have a managed or referenced library. Since you're totally new to Aperture, I'm assuming you have a managed library since that's the default.
FYI: Managed means Aperture handles image files and places them inside the library file. Referenced means you manage the image files and Aperture only points to (references) them.
For a managed library, select an image you want to delete. Type command-delete. (That's the reverse delete key next to the "=" key). (You can also right-click an image and choose Delete Version) That will remove the images from their Project and place in the Aperture Trash. They're still taking up space in the Trash. If you really want them gone for good, right-click the Trash in the library pane and select Empty Trash. Poof.
For a reference library, I forgot the exact details since I don't use this type of library, but you'll be asked (or can check a box) to delete the original file from the disk.

Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591

Why won't my apple tv sync with my new macbook pro, they are both on the same wifi signal

why won't my apple tv sync with my new macbook pro, they are both on the same wifi signal.

Not sure of what? In your second response you said the issue was with airplay. You were also having issues connecting laptop to computer, which points to a laptop connectivity issue. I simply asked if home sharing was an issue as well, since that will confirm the laptop as the cause. Your response that home sharing is on doesn't really help since that doesn't itself have a bearing on airplay nor does it answer the question in regards to if home sharing is working on Apple TV
If you have a further question you will need to be specific.

Savings images from Aperture to external hard drive

I have a basic question about the file structure on Aperture and mac's. I'm an old pc user, so I have not had a chance to investigate the structures yet and hoped I could get some guidance on this.
If I import several images from a camera SD card into Aperture, the images are deleted when the import has finished. How do I later copy the images from Aperture to say an external hard drive?
Appreciate the help.

Bjorn -- welcome to the forum.
Aperture is an image database. The Aperture database is called a Library. The database consists of a list of Images, the files needed to create those Images, and a whole bunch of data associated with each Image.
The files needed are the originally imported file, and the set of instructions Aperture uses to "adjust" the original to create your adjusted Image. On import, the original file becomes a Master. The Master is _never_ altered (this is the "non-destructive" advantage of this kind program). Aperture doesn't care where the Master is stored, as long as it can find it (it should be a locally attached drive). If you let Aperture store the file itself, it puts it inside the Library. If you tell Aperture where you want to store it (other than than in the Library), Aperture makes note of this by storing a pointer to the location you choose.
Masters stored in the Library are called "Managed Masters". Masters stored outside the Library are called "Referenced Masters".
(The file listing the Adjustments is the Version. The Version is always stored in the Aperture Library. Versions are small text files. The cost in storage and read-time is so minimal it can be ignored.)
So:
- Library (presumably in your Pictures Finder-folder)
- - Master
- - Version
or
- Library (presumably in your Pictures Finder-folder)
- - Pointer to Master
- - Version
- Master (wherever you specify)
There is no connection between Aperture and any data files that are not imported into the Library.
If you make copies of your photograph files prior to import (an excellent practice), there is no connection between Aperture and the copy you do not import.
Here is a short guide I posted to the parts of Aperture every new user should know well. Read through it, and ask questions as you move forward.
Note that making backup copies of your originals, copying or moving your originals, and making them Managed or Referenced Masters are all options presented in the Import dialogs.
Message was edited by: Kirby Krieger

Why won't images from Aperture sync to iPhone or iPad?

Similar Messages

Maybe you are looking for