Why won't iTunes 10.6.3 work after installing Mountain Lion?

Instead of downloading from Apple updates on my computer, I went to apple.com, loaded it from there and the update worked fine.

Similar Messages

Printer won't work after installing mountain lion?

printer won't work after installing mountain lion?

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.

Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.

Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.

Many of my System Preferences will no longer work after installing Mountain Lion. Software update, startup disk, iCloud, etc. no longer will launch. I keep getting a drop down window saying I must restart system preferences in order to use. No go!

Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.

Hi Jeff,
Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
Hope it goes well,
Rick

Some USB ports no longer working after installing Mountain Lion?

Some of my USB ports are no longer working after installing Mountain Lion onto my 21' 2011 iMac. I used to plug in my iphone 4S and charge it, or transfer files onto my iPad but none of the ports no longer work to do this. Funnily enough, other equipment plugged into the works. I have tried changing the cable. Any ideas?

In my experience, the USB ports on the back of an Apple monitor can be re-enabled simply by unplugging and plugging back in the device in question. You might also check to see that the USB Monitor hub shows up in System Profiler. My Apple monitor USB ports experienced no changes in moving to 10.4.7.
bd

Why does Google chrome not open or crash after installing mountain lion?

Why does Google chrome not open and/or crash after installing mountain lion?

Thanks.
I have the updated chrome (9.0.597.19).
I have just now tried the recommendation by Zohaib Sharif in teh google gropus link you sent
http://funbird.co.uk/tech-articals/google-chrome-freezing-and-hanging-problems/
Hope this works!

Macbook air builtin webcam not working after installing Mountain Lion

camera is not working after installing Mountain Lion

This did not resolved my problem. Camera green light glows but facetime still deos not work. Also
tried with different users and different applications. Not working

USB ethernet connection via switch no longer works after installing Mountain Lion

Since installing Mountain Lion, I have no longer been able to use my USB ethernet connection via an ethernet switch. I have deleted and re-added the connection in preferences. The connection reads "Connected" but it is not working as connected (unless I bypass the switch and plug directly). I have tried doing this with two different switches to no avail. Does anyone have a solution? Thanks.

I Read this sollution elsewhere on these forums and found that this worked for me.
However, the "load" time in Safari is not as fast as it used to be. Might be due to some router setting.
Solution:
For all the Dutch users that have a KPN Experiabox router:
1) go to http://192.168.2.254
2) Username: KPN Password: leave empty (You might have changed this yourself)
3) Go to Network (at the top)
4) Go to WLAN (at the left)
5) Set as follows:
Enable WLAN: Enable
Mode: IEEE 802.11g Only
Channel: 7
Transmitting power: 100%
Enable WMM QoS: Disable
This fixed my wifi problems. Good luck

Pages wont work after installing Mountain Lion

After I installed Mountain Lion on my Macbook Pro 2010, Pages wont work, together with the whole iWork 09 package. I've tried re-installing, signing out of iCloud etc.. But nothing seems to work. It say the application is open but nothing appears on the screen, if i open a document its says its unable to open the document.?

Quite a few users have had problems but none seem exactly the same & the solutions are matter of trial & error. Two things that should be done, no matter what, are using Disk Utility to repair permissions & updating iWork '09 to 9.2. Some users have needed to delete the apps, particularly Pages, & reinstall to get them to work.

The volume buttons dont work after installing mountain lion

Yesterday I installed Mountain lion. Now the volume buttons don´t work. When I press them the volume don´t change. I tried to change in the system settings, but all selections there can be made.

By menu bar you mean the sound at the top of the screen?
That doesn´t work either, it´s locked.

My dvd quit working after installing mountain lion

It was working fine before I installed Mountain Lion. It took the disk in and then ejected it. Now it acts like it is completely dead - like something just turned it off. I've never used the drive that much. It's a mid to late 2010 aluminum iMac.

Tried alot of things, but it finally started working after resetting the SMC controller - go figure...

Iworks 09 quit working after install mountain lion

After installing Mount Lion, i had a probelm with my time machine drive and lost my previous Iworks apps. I went hunging for my CD but alas is nowhere to be found. The Iworks applications launch but can not open any files. see screen capture of typical error dialog box.
I probably will need to buy iWorks 11 to fix this but was hoping for an alternate solution.
Thanks
Bob

Tried alot of things, but it finally started working after resetting the SMC controller - go figure...

Why won't Windows XP automatic updates work after installing new ITunes

After installing the new 11.1 Itunes, Windows automatic updates fail to install any new updates.
The last time this happened was when I last updated Itunes. I can't remember how I fixed it but I had to go into the apple software and fix something.
Please help!

Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??

Why won't my plug-in's work after installing Firefox 4?

After installing Firefox 4 I have had problems. The Aniweather doesn't work and the other plug in don't seem to be working either. They all say they are enabled. I have reinstalled Firefox and it still doesn't work. I would go back to the old Firefox if I could find it.''Roboform Toolbar won't show when I click on the icon in the upper left corner.

Click one of the other tabs at the left on the about:addons page if the "Get Add-ons" tab isn't working or takes too long.

Some mouse features don't work after installing Mountain Lion

Any one else having these problem?
Swipe between ful-screen apps: Does not work after system has been asleep. Have to restart or log out/in to get it to resume working.
Mission Control: Does not work.
Smart Zoom: Does not work.

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

Why won't iTunes 10.6.3 work after installing Mountain Lion?

Similar Messages

Maybe you are looking for