Why won't Lightroom 5 export as a small (e.g. 100k) jpeg file?

When I try to export my edited raw file to a jpeg for web use, I need to use a small size file. Lightroom 5 doesn't seem to let me do this below 1000k.
Does anyone know how to do this?
Many thanks

It will, but not if you try to export it at the original number of pixels. You need to visit the 'Image Sizing' panel in the Export Dialogue and reduce the number of pixels to something that will compress to your 1000k size:
The numbers I show aren't necessarily the numbers you want, and if you specify your size in pixels, the Resolution parameter will be totally ignored. You'll need to think about what you're doing and to experiment a bit.
Hal

Similar Messages

  • Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?

    Why won't Lightroom 4.4 import my Nikon D7000 NEF RAW files?
    I even downloaded the latest Adobe DNG converter and converted all the NEF files to DNG then tried to import to lightroom - it didn't even recognise them??? What the...

    Keith_Reeder wrote:
    It's not a "wrong" error message - it's true, as far as it goes, and it's completely unrealistic to expect error messages to be fully diagnostic - they're a starting point.
    Not wrong?
    Let us have a look at the error message:
    "The following files were not imported because they could not be read"
    This clearly gives the user the impression that there is a reading error where you want to copy the files from. Is that the actual error?
    No, the actual error is that the file could not be written at the destination.
    It is possible that it is not factually wrong because Lightroom first make a failed copying attempt without giving an error message, then still assumes that the files have been copied and tries to import them, and THEN makes a failed import attempt from the destination and gives the error message. But that would never be anyone's first guess when they experience that error message.
    A much better error message would be: "The following files were not imported because they could not be copied to the destination folder."

  • Why won't Lightroom 4.4 recognize my Nikon D600 when tethered?  However, it will recognize it otherw

    Why won't Lightroom 4.4 recognize my Nikon D600 when attempting to use Tethered Capture?  However, Lightroom recognizes the camera otherwize.

    I just checked the list of cameras supported for tethered shooting, and the D7000 is on the list of supported cameras. So perhaps it's time for you to double check your camera settings to make sure it is set up for tethered shooting.
    http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

  • Why can't I export my newsletter from CS into a pdf file all of a sudden?

    Why can't I export my newsletter from CS into a psf file all of a sudden?

    We can't know. You are not providing any relevant details - program versions, system information, PDF settings used and so on.
    Mylenium

  • Using Mac OS 10.8.5 why won't disk image from Utilities mount to open a .dmg file?

    Using Mac OS 10.8.5 why won't DiskImage from Utilities mount in order to open a .dmg file?

    Select the .dmg file and double-click it. FWIW, there's no DiskImage thing in Utilities on any of my boot volumes.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Exporting photos from album to disk as jpeg files

    I am using PSE 10 on a Mac and I would like to export photos from an album as jpeg files to the hard disk.  I would like to rename the files so that the first image in the album will have a the album name and index 1,  the second image will have the same name and index 2 etc.   Is it possible to do this? If so how?
    Hans Brodin

    Choose your album in Organizer and press Cmd+A (select all) then Cmd+I to open them all in Full Edit which will place them all in the project bin.
    Then use the menu:
    File >> Process Multiple Files
    Choose opend files for the source (from top dropdown menu).
    Use the rename function replacing document name with index or whatever name you want.

  • Why won't Lightroom save my edits when I export them?

    When I export my photos as JPEGs, the changes that I've made aren't saved. I open the exported photo but it looks just like the original with no changes made to it. I am using the trial version right now as I am waiting for the software in the mail. Could this be why? HELP! Below: the left picture is the exported photo and the right picture is what it should look like!

    No, the trial version is a full version of Lr with all features enabled.
    Did you select <Original> in the Export Dialog / File Settings section?
    <Original> means that you export the file in its original state, before you did any editing.
    If you want your edits included in the exported image you have to select one of the file formats other than <Original>.
    See Screen shot:

  • Why won't Lightroom 2.3 suddenly not import RAW files?

    Why can't I import RAW files into Lightroom 2.3? I've imported them for years, until today, after I installed a Canon  Pixma MX860 multi-purpose printer. Would this affect Lightroom? Now I get a Lightroom message: "The files could not be written." Tried to import from Canon 5D on a CF card and from a Panasonic Lumix on an SD card many times. Same result. I can pull the RAW files individually off the cards into Photoshop CS3 RAW window and adjust them, but can't on Lightroom. It won't automatically import the files and won't take them manually. Am using a PC with XP Professional. Any thoughts?

    Are you sure it's the same problem as that user had?
    What error message are you getting when you try to import a raw file?
    What camera?
    What version of LR?
    What computer and operating system?
    Did your ability to import raw files just suddenly stop, or have you never been able to import them?
    Hal

  • Why is my swf exporting as a small blank file?

    I am very new to After Effects.  I created an animated banner with text effects, images and movie files.  It is 1 minute long.  I am trying to export this to an SWF so I can add dynamic links in Flash.  When the file had less layers, it rendered and saved just fine, but now that it is completed with many more layers (28 layers) and is full length it will not export properly.
    Let me clarify.  When I export to SWF it goes through the motions, creates the files and everything, but when I open the SWF (either in a browser or in Flash) it is blank.  When I get the properties of the file, it is only 23 bytes large.  What am I doing wrong?  I have tried to ignore and to rasterize unsupported content with the same result.
    FAQ Checklist answers
    I'm using After Effects Cs6 version 11.0.0.378
    I just installed updates yesterday.
    I'm on Windows 7 Ultimate 64 bit
    Source files are mostly png and jpg.  There is one wmv file, but I don't know any other details about it. (I'm a newb)
    No error messages
    I am exporting to SWF
    The file exported properly before I added additional layers and effects
    Quicktime version 7.73.80.64
    I closed all other running software to test the export, I even restarted my computer.
    No 3rd party add-ons for AE
    Intel Core i7 2.8Ghz, 12GB DDR3 RAM (1600Mhz), 500GB Hard drive, Nvidia GeForce GT 240 video card
    No 3rd party I/O hardware
    No OpenGL features
    Final output has the issue, I can play the file within AE without any issues.
    Render Multiple Frames Simultaneously is not enabled
    See steps I've taken in description at the beginning of post.

    After Effects CS6 (11.0) has a bug with exporting SWF files that is fixed in After Effects CC (12.0), as mentioned in the "a few choice bug fixes" section here:
    http://blogs.adobe.com/aftereffects/2013/04/whats-new-changed-after-effects-next.html
    But why are you exporting to SWF at all?
    If you're exporting for further use in Flash, export to one of the video formats that Flash can import, preferably F4V. SWF is not a good choice for video. (You can, of course, in Flash create a SWF that embeds or links to an F4V file; that works well.)
    Also, this part of your checklist seems wrong:
    I'm using After Effects Cs6 version 11.0.0.378
    I just installed updates yesterday.
    If you installed the updates, you'd be using After Effects CS6 (11.0.2), not 11.0.0. Choose Help > Updates now to install the updates. There are a lot of bug fixes in the most recent updates.

  • Why Won't iPhoto Export My Slideshow?

    I import photos to iPhoto from my Canon Rebel. They were taken as RAW. I create a folder and name it within iPhoto. I place 50 images and order them the way I want. I then "Select All" the 50 photos in the folder just to play it safe. I click the Plus button and choose Slideshow. I go through all the steps, selecting the theme, selecting the Apple canned music (so that there won't be a copyright issue), I set my settings... Show Title, play music through slideshow, etc. I then click the Preview button. It works fine! I then tap the Play button. My slideshow fills the screen and does as I have asked it to. I then make sure that my slideshow is selected in the left column (it has not been unselected since I started this maneuver) and I click the Export button at the bottom of the window.  HERE IS WHERE, AS I SAID BEFORE, EXPORT DOES NOT WORK.... A dialog box comes up: "Export your slideshow Choose a format based on where you will view your slideshows;___Format:" (I have chosen all three choices many, many times trying to get beyond this point.)  "Automatically send slideshow to iTunes" has been selected, BTW.  I then hit the export button and the navigator dialog box opens and I choose my folder called iPhoto Slideshows. I click OK.  At this point the export progress dialog box opens and sits there... the thumbnail rectangle remains BLACK. The progress bar never changes from its standard GREY.  The only text on the export slideshow dialog box remains the same and says: "Exporting Slideshow ..."  Fearing there was a hiccup somewhere, I have left this window open and able to work OVERNIGHT, just in case. Nothing. I have tried all three formats. I have changed the destination folder. Nothing.
    I have had this problem for months. Have asked this forum for help. I have been told nothing is wrong with iPhoto.
    So here's my new question: "What am I suppose to do about this problem that I have explained above?"
    I would say my copy of iPhoto is corrupt, if there is nothing wrong with iPhoto in general. Is this a possibility?  In which case.... How do I get another iPhoto app without having to pay for it?
    Or do you have some other reason this process is not working on my Mac Pro with OS X  10.9.5 (13F34)?
    This is the fifth time I have had to export all my photos to my laptop and use Snow Leopard with iPhoto 9.2.3 in order to finish my projects.
    Please help with these EXPORT FAILURE questions.
    Thank you, very much.

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Why Won't it Export to Word ?

    I just bought one year of this Export PDF thing for $20 just for the sake of one file I want to convert.
    The prog goes about uploading it - takes forever (It's 66megabytes) - and then closes with a curt, fleeting message that there was an unexpected error!  And that's it.  Nothing left at all.
    Tried that a couple of times. The same each time. Is that what it is supposed to do? Just close with a curt message and that's it?
    And no file uploaded.  So then I went to the upload file thing.  Thinking if I've got it uploaded there I can keep trying the conversion and I won't have to upload all the time.
    But damned if the same thing didn't happen.
    I waited and waited for the upload, watching the progress bar move painfully slowly across the screen - got right to the very end and bang! Unexpected error or somesuch message for the usual second or two and then back to the plain screen with no hints of what has just happened, no error messages, no log that I know of, no hints of where/how to report it all and get help...
    So it looks like the error in the first place might be with the file upload and not with the conversion thing at all.
    Anyway it's a pretty poor show the whole thing, I'm thinking.
    Can anyone offer any advice, explanations, course of action, anything?
    And this help forum doesn't seem much better inasmuch as I can't see whether or not I"m going to get advised of responses to  my post?  Which at this stage of the game is pretty poor programming, isn't it? A bit of a clunky old forum?  You can get better action for free from phpBB.
    Anyone got any help would like to contact me with it directly, lest this forum doesn't advise, my email is abrogard at yahoo dot com.

    Hi Kalima01,
    We are so sorry to hear about your frustrations. I do appreciate the level of detail you have shared. If you are willing - try rebooting and then logging in again into ExportPDF. The file size you are converting should be fine.
    Here is a 'Getting Started' guide that may be of help as well.
    Please respond when you have a chance and let me know about the reboot results.
    I will keep an eye out for you!
    Kind regards, Stacy

  • Why won't iPhoto Export Slideshows in Mavericks?

    After setting up a slideshow in iPhoto 9.5.1 running on a PowerMac with OS 10.9.5 (Mavericks), the app will not export the slideshow. Why not? How do I get a copy of iPhoto that works? Is Apple no longer supporting iPhoto? When and where will this be announced and what is the work-around suppose to be?

    1 - iPHoto is supported
    2 - iPhoto can export slideshows
    3 - if you want help you need to actually provide information - like what does happen - what error messages - anything else - simply saying "it does not work is not enough to have anyone help you solve your specific problem
    LN

  • Why won't lightroom 5 download on Creative Cloud?

    I belong to Creative Cloud but cannot download Lightroom 5 on my Mc Book Pro...why is this?Photoshop Lightroom

    What error message do you receive?

  • Why won't iMovie export my movies?

    Basically Imovie isn't uploading anything for me every since the new update. I used a lot of green screen effects and picture backgrounds so I assumed that may be the problem and recorded the movie it self with quick time player. Yet even after it was just one clip and music, it won't export.
    It says it has "failed".
    Help?

    Hello there, charliewittke.
    The following link from the online iMovie Help Guide shows the steps on how to export your video:
    iMovie Help: Export a QuickTime file
    http://help.apple.com/imovie/mac/10.0/#move6e0cb2ad
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Question:  Why won't Adobe Export PDF convert to Word when requested?

    Adobe Export PDF will not send back Word doc., symbol just spins and says converting and I receive nothing.  I paid for service, it doesn't work.  Why isn't it converting??

    Hi,
    Are you able to see the file under the "Files" tab at https://cloud.acrobat.com?
    If yes, you can download it from here.
    If not, can you please try using a different web browser or Adobe Reader to convert your file? Please let me know if this worked.

Maybe you are looking for

  • Obm-xdg won't show anything in the Openbox menu [SOLVED]

    I put the code: <menu execute="obm-xdg" id="obm-xdg" label="xdg"/> in ~/.config/openbox/menu.xml just like it says to do universally. It does not show any menu. Every other menu item in the file works. I can edit them and they change. obmenu can see

  • Seagate Backup Plus won't show up anymore

    I have a 1TB Seagate Backup Plus for Mac Portable Drive. I bought less than a year ago. It had been working great. Until recently. Since the last week or so, when I plug it in my Macbook Pro (10.9.5), the external drive lights up but it doesn't show

  • MIni Mac keeps freezing!!!!!

    I hope someone can help me! I have a mini mac and just recently everytime I turn the computer on in the morning I will login and then I go to open a program and then it just freezes! So i have to pull the power cord out in order for the computer to s

  • Column alias error in a query of views

    Hi I was trying to workout this query create view dept_sal as select d.department_name,sum(e.salary) from departments d left outer join employees e on d.department_id= e.department_id group by d.department_name; and i recieved this error message ....

  • Batch Selection in Tcode LP12

    hello experts we are using release order parts to stage the material Tcode LP12 for Production in the LP12 screen the batch tab is deactivated ,can anyone tell me how to activate the batch field in LP12 tcode so that we can pick the batches in that s