Why won't my 7th generation nano work with my Mac Book 10.5.8 Itunes

I just got a used 7th gen Nano. When I plug it into my Mac Book  with Mac OSX version 10.5.8 I get a pop up saying that my itunes needs to be updated. When I go to update it says I have the most recent update. What do I do can I even use this ipod?

1. Because older versions of iTunes don’t contain the code needed to work with it.
2. Click here, buy the DVD, back the computer up, install it, and run Software Update twice.
(113326)

Similar Messages

  • Why won't my new iPod nano work with griffin itrip?

    I just receiveed a new ipod nano as part of the replacement programme, but it will not work with my griffin itrip or my old speakers even though the connection is the same - anyone know why?
    thanks

    I used an iTrip with my old Classic 160, but when I got my 6th gen nano, it wouldn't work either. My iTrip was old, and the connector had lost it's plastic bits, so I thought that might be the reason. I could still use my Logitech speaker dock, so I don't think they changed the connector.

  • How do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    how do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
    ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. 

  • Will a USB SuperDrive work with my Mac Book Pro?

    Will a USB Superdrive work with my mac booc pro?

    lorifromgermany,
    if you have a non-Retina MacBook Pro, the following command could allow a USB SuperDrive to work with it.
    Log in as an administrative user, open Terminal, run the following command within Terminal, close Terminal, and then restart your MacBook Pro:
    sudo nvram boot-args="mbasd=1"
    (When it asks you for a password, enter the administrative user’s password.)

  • Why won't my 7th gen nano send nike  info in?, Why won't my 7th gen nano send nike  info in?

    I have the new ipod nano.  It is supposed to send my running info into nike+.  It says that the information has been sent but it never shows up on my nike+ account.  I've tried unmarking the auto sync buttons, disconnecting it and starting it over.  That didn't work.  Any other ideas?

    Not all iTunes video can be transferred to iPod, If the video resolution or video bit rate beyond iPod limitation, you can't upload them to iPod. For example, some iTunes purchased movie are High definition movie, the resolution is too high to play on iPod Nano, but you can highlight the problem video in iTunes and choose Create iPod or iPhone version from the Advanced drop down menu.  When the conversion process has completed, sync the new version to your iPod. If you need details, here is a guide about how to transfer video/dvd to iPod. Hope it helps. Contact me if you have any other question.

  • New 3G IPhone.  Why won't my IPOD Classic headphones work with 3G?

    Why won't my new IPOD Classic earphones work with my new 3G IPhone? These are the original earphones that came with the IPOD and IPhone. Thanks.

    When I tried the headsets again, they all work. I didn't have one of them plugged in far enough. I guess didn't want to breakanything. Thanks for your reply. All fixed!!

  • Why won't my dr beats solo work with iPhone 6

    iphone 6 won't work with Dr beats solo

    When I tried the headsets again, they all work. I didn't have one of them plugged in far enough. I guess didn't want to breakanything. Thanks for your reply. All fixed!!

  • Why won't safari 7.o.1 work with silverlight and netflix using mavericks?

    Netflx requires MS Silverlight. After installation Safari leads to the Netflix prompt "thanks for downloading, please restart your browser"--restarting browser doesn't work, nor does restarting computer. Netflix works with Silverlight on Firefox however. So, it seems like a Safari problem. Netflix techs couldn't help. I'm using a MacBook Air with Mavericks. Thank you for any advice on getting Safari (7.0.1) to work with Silverlight with Netflix.

    Neither one of those Safari extensions are beneficial, so I suggest you uninstall them.
    Safari Restore looks like junk. It's no longer required anyway since Safari already incorporates what it allegedly does.
    Folx may have corrupted the Silverlight download, therefore I suggest repeating my above instructions to remove and re-install Silverlight.
    Restart your Mac in "Safe Mode" and determine if you can load a Netflix movie then. Netflix will stream in Safe Mode, but the video is likely to stutter and there may be no audio.
    Please read the following first:
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

  • Why won't the top row of letters type on mac book pro?

    The top row of letters won't type on my mac book pro and the "b" letter acts as a back space.

    http://support.apple.com/kb/TS1381
    Try Pram reset
    http://support.apple.com/kb/ht1379
    and SMC Reset
    http://support.apple.com/kb/ht3964
    read
    https://discussions.apple.com/thread/3786218?tstart=0
    may be a hardware problem

  • WHY DOESN'T MY IPHONE 4S BLUETOOTH WORK WITH MY MAC OS X 10.8.2

    PLEASE HELP!!!!

    What exactly are you trying to do? The iPhone will only pair with any computer, by Bluetooth, for the purpose of Tethering. File transfer, by Bluetooth, has never been supported on any iPhone. So, if you're not trying to Tether, you can quit trying to pair your phone with your Mac, as it won't pair.

  • Remote not working with new Mac Book Pro

    Had my 2.16 MBP for 2 days and cannot get the remote to work. The IR is not disabled, but I cannot select the UNPAIR option so I am guessing the remote is not paired with the MBP.
    I am pressing the Menu and FFD button, but nothing appears to happen.
    Has anyone got any suggestions as to what to try next ?
    Thanks
    Mark

    Hi Mate,
    I read this once somewhere hope it helps..
    A great way to tell whether your remote control is working or not is to point it at the camera while you have Photo Booth running. The camera somehow picks up the IR signal and translates it into the visible, which I think is hilarious. It works with any IR remote control.
    If your remote is eating up batteries that fast, it might have some kind of short circuit. I'd get it replaced.

  • Why won't my plantronics 780 headphones work with itunes?

    I have plantronic 780 headphones, the kind that plug in to a USB drive, and It is selected as my only default "speaker" on my actual computer but for some reason Itunes won't play any of my music because I disabled my speakers on the computer.  Trying to see if that was the issue I disabled my computer speakers and defaulted my headphones and yet I can hear everything else (youtube, netflix, everything), I cannot hear anything from itunes and it won't even play my music.  How do I fix this because I've gone through all the preferences and stuff on itunes and the only thing that I could think of would be playback under "more options" but it won't allow me to select a specific device to listen through...I don't understand why itunes has complicate it this way, if my computer default "speakers" are my headphones than it should automatically play.

    Which version of iTunes are you using?  The 64-bit version of the first release of iTunes 12.1 (12.1.0.71) has a number of playback issues, including failure to correctly switch between output devices - some users have reported, for example, no ability to play through a Bluetooth device unless that device was selected as the default audio output in Windows at the time when iTunes was installed.  There is, however, a new release as of today (12.1.1.4) which claims to resolve the playback issues with its predecessor; it may be worth installing the new version to see if it resolves your problem.

  • Why won't my 20" cinema display work with an HP laptop / Vista

    I have my 20" cinema display connected to my hp laptop (using vista) under hardware, and a few other places it shows that the monitor is detected, but I can't get a picture to show on the monitor no matter what I do. It stays black, even though it is detected. Has anyone else had an experience with this?

    the option(s) that it gives you are the recommended resolutions as determined by the "handshake" that happens between the monitor and computer (sort of a pre-UPnP standard). you can always press the advanced button and then manually select any resolution / display rate that your graphics card is capable of displaying.
    what was the option, by the way? what resolution and display rate?
    the resolution should be 1680x1050 and the refresh rate can probably be anything from 60 to 80 Hz.

  • Why won't my HP Photosmart C7280 work with Maverick

    I have Maverick OS X 10.9.1 installed on my IMac. Since installing it the scanner will not save scans in PDF format. When I deleted the printer/scanner and tried to reinstall it seems to go well, but when I scan a document all I get is a pdf that when I try to open it is nothing but grey matter.

    See https://discussions.apple.com/message/24608239?ac_cid=tw123456#24608239 for starters.

  • Will the Buffalo LinkStation Live work with my Mac Book?

    I am wanting to get a hard drive that will wirelessly back up my two MacBooks using Time Machine Software. Also, I would like to be able to hook up my printer to this device so that we can share a printer between the two Macbooks wirelessly.
    I came across the "Buffalo LinkStation Live™ - LS-CHL". It seems to do exactly what I want, but I can not tell if it is compatible with Time Machine software or if I have to use their bundled software.
    Basically, I want to share a backup HD and printer between my two MacBooks....wirelessly. I do not need a router because I already have one. I understand a Time Capsule would probably work, but it is more than I want to spend.
    Here is a link to the LinkStation Live™ - LS-CHL.
    http://www.buffalotech.com/products/network-storage/linkstation/linkstation-live -ls-chl/
    THANK YOU!

    I'm not sure about the 2007 mini, but a quick check is to open your system preferences and look for Bluetooth preferences.  If there aren't any, then no magic mouse for you...

Maybe you are looking for

  • Creative media

    hi i seem to have a problem with the .as im recording a cassette a prompt comes up saying ctcms exe has generated problems and that ill have to restart the program.how can i fix this coonsanders

  • SQL job containing a SSIS package

    Hi, I'm trying to run a job that executes a SSIS package. Some of the blocks in the SSIS package refers to files stored on network folders. Each time i run the job manually i get an error message saying that the file can not be opened because it is a

  • Zen MicroPhoto not playing tracks in proper ord

    Hey all, Just got this player and it is pretty good. Having one problem though. Some albums do not play songs in the proper order. Instead they are played in alphabetical order. I checked the tag information on the player and it reads the tracks as h

  • Error in FILE 2 FILE scenario

    Hi experts, 1. I have had a problem in FILE 2 FILE secenario, my file is getting deleted from sender side and it is not going to receiver side? 2. Some times i am manage to get file into otherside but content in the file is not visible. could anybody

  • Why MetalSplitPaneDivider is not a public class?

    Dear All, The MetalSplitPaneDivider is not a public class because of that, I am not able to extend it to give a custom implementation. My requirement is that, whenever the leftButton is pressed, it should not go the 0 position, instead I have to have