Why won't my Adobe XI pro show the edit function?
I open the pdf that needs editing but it is not an option. I have Adobe XI pro.
Thanks for the response. The version of Corel Ventura that we are using worked well with our previous version of Acrobat Pro, which was version 6. We could generate PDFs from Ventura 7 two ways: either by 1) using the printer driver, which is still listed in the application as "Adobe PDF,Net05" or by 2) selecting this driver and checking the "Print to a file" box. This second method produced a ".prn" file that we could then slide onto the Distiller icon to open Distiller and create the PDF file. Neither of these options now works with Acrobat Pro XI. In fact, I just tried the first method again and received the following error message in a Notepad pop-up window:
%%[ Error: typecheck; OffendingCommand: setdash ]%%
Stack:
0.0
/asc42
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Update: We just updated to Corel Ventura 10, and now we CAN generate PDFs using the "Publish to PDF" method. Thanks for your help again!
Similar Messages
-
Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."
Hello-
I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project could not be loaded. The project will be opened in Desktop mode." The next window is a Windows Explorer screen, that wants me to choose a file to open. If I cancel that, it brings up a blank looking project with no timeline or anything?
A quick comparison of systems:
Mine:
HP dc7700s desktop
Windows XP OS
Adobe Master Collection CS3
Hers:
IBM compatible laptop
Microsoft Vista
Adobe Premiere Pro CS3
Adobe Photoshop CS3
I have googled the error message, but have not found anything to fix this. I have also verified from Help - About that we have the exact same versions of Adobe Premiere Pro CS3 installed.
I need to be able to view this project on either computer. Any advice would be greatly appreciated!!!
Thank you!>project will be opened in Desktop mode
I have never used any non-standard files, but from reading here, desktop mode is used when the video files are not standard... in one way or another, but usually pixel dimensions
What is the codec and properties of the files in that project?
Are you sure they are 100% standard? -
Why won't my Adobe Bridge open?
Why won't my Adobe Bridge Open? I keep getting an error message. I first installed the free trial of Illustrator CS 6, but a few days ago joined the creative cloud. I would just uninstall & reinstall Bridge, but its not in the list of apps to install. Since joining the cloud I have also installed photoshop & indesign. Doesn't Adobe have chat support? I used in when first signing up for Cloud. Now I can't find it.
Thanks!Hi Trisher83,
Bridge gets installed along with other programs (like Illustrator or Photohop) so it might require uninstalling all CS6 products to be able to reinstall it.
I would uninstall all CS6 products and then reinstall one which includes Bridge from a new user account and test to see if you still get the error.
These links might be helpful for reaching support
http://forums.adobe.com/community/download_install_setup
http://helpx.adobe.com/contact/
http://www.adobe.com/support/download-install/supportinfo/
-Dave -
Why can't I download Adobe Premiere Pro from the cloud- have tried repeatedly, followed all the post
Why can't I download Adobe Premiere Pro from the cloud- have tried repeatedly, followed all the posted advice- all other programs have downloaded without a hitch.... what's the deal?
Hi Clearly Stated,
Maybe try downloading the Premiere Pro trial and then licensing it?
http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_pro
After you install just covert it to be licensed as part of Creative Cloud using the "License This Software" option shown here.
http://helpx.adobe.com/creative-cloud/kb/convert-cs6-licensed-under-ccm.html
-Dave -
Why won't my 2011 MacBook Pro restart after Yosemite installation?
Why won't my 2011 MacBook Pro restart after Yosemite installation?
What symptoms are you seeing?
At what point does it get stuck?
Is it failing to Restart, or failing once it restart?
what exactly is on the screen, if anything?
Do you get the chime? the gray Apple? The spinner? black screen? gray screen? prohibitory sign? -
Why won't my external hard drive show up anywhere? Something wrong abt NTFS.
Why won't my external hard drive show up anywhere? Something wrong abt NTFS. After my OS turn to OS X Lion, this problem occur. I couldn't solve it, anybody?
It doesn't make sense.
Anyway, I found the solutions. Download software for solving this problem.
Here is the link:
http://www.macupdate.com/app/mac/24481/ntfs-3g -
My Macbook Pro shows the Apple and spinning wheel at startup but will not continue the startup. Does anybody know how to get past this, so the computer continues to startup?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I've been paying for Adobe Premiere pro for the past three month and today, despite the fact that i have paid already for the upcoming month, i cannot access it because of an "intenet connexion problem". But I'm connected and I have the right ID. What should I do?
Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer -
How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?
Hi there,
I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
Any established hardware/convertor to recommend ?
ThanksRyan,
For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
Good luck,
Hunt -
So I downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.
login and download your software from the adobe volume licensing website, Customer resources | Adobe Buying Programs
-
I need the information to send to my IT people to transfer my copy of Adobe X pro to the new computer case number: 0215291791
Hi Scott ,
You need to deactivate your product from the old machine and then activate the same on the new one.
For deactivation Click Help>Deactivate.
You may also want to refer to the following link to get more information regarding activation and deactivation of your product.
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
To Activate the product on your new system please get in touch with the Adobe support team.
http://helpx.adobe.com/x-productkb/global/service1.html
Regards
Sukrit Dhingra -
My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.
I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours. -
Reinstallation of adobe acrobat pro using the same license key on the same machine.
How to reinstall Adobe Acrobat pro using the same license key on the same machine.
Is it currently installed and working?
Installed and broken?
Or on a wiped machine, nothing there? -
Purchased Adobe Acrobat Pro XI Student edition from Best Buy and it will not download
Purchased Adobe Acrobat Pro XI Student edition from Best Buy and it will not download. It made me download an installer and then when I went back to download it from the Best Buy digital library and clicked on "Download," nothing happened
I have done both of those and still no luck. I have tried this download on Chrome, Internet Explorer, and Firefox and its the same story on all of them. I have a Windows, also, if that helps
-
My iPad stopped working and I turned it off,and now after charging it won't turn on!It shows the apple logo that's all...What to do?
Have a look at the following document, I believe your iPad's condition is explained at its end:
http://support.apple.com/kb/TS3281
Maybe you are looking for
-
Can not initialize the database
I have some problem with oracle 8.1.7. I run along the instruction with the "Installation Guide", set up the oracle user, oinstall and dba group, and its relations. Also, I set up the variable as the Installation Guide says. After preparation, I run
-
Can't export/import in Photoshop CC, stuck on loading sign
I've finished an animation in Photoshop CC, but every time I try to import or export something in Photoshop it gets stuck on the spinning loading sign and I have to quit out of it with Task Manager. If anyone knows how to fix this, please leave a res
-
I need heed help for Handle the JButton
hi, guys I am writing a small program It has name and number field. It also has the first, privious, next , last and add buttons. i want to load the myData.txt file to the name and number field. and I want to make the buttons handle the events. and w
-
"Reading an XML file in Java is even easier. The standard XML parsing API for Java, SAX, automatically chooses the right encoding when it opens an XML file. SAX provides the parsed data to you in String objects." Can sombody confirm this?
-
When we should use JMS based proxy services and when JMS Adapter in OSB
Hi, Can somebody explain me when we could go for JMS Adapter and when we should go for JMS based service in OSB? The one scenerio i can think of is when my provider/consumer is using jms provider other than WLS jms provider we should use jms adapter.