Why won't my bluetooth connection work with the new sofware when it comes to my ITunes?

After I installed the software, my phone will connect to the bluetooth (so the phone and such work and the music) but I can no longer control my music from the radio and see the song that is up (scroll on screen). I have checked all the settings, but they are good. So it has to be the software.

There is an alternative downloader for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues - including problems with Bluetooth devices - that some users have been reporting with the full 64-bit version (the alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer).  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).
Another possible remedy relates to a potential clash between the 64-bit version of iTunes 12 and Google Chrome; some users have reported that uninstalling Chrome (not just not having it running) resolves the iTunes playback issues without having to install the alternative version referred to above.
Finally, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

Similar Messages

  • Why won't my FireWire Solo work with the Mavericks OS?

    I have recently upgraded to the Mavericks OS (10.9.2) and now my FireWire Solo is not even recognized when I plug it in. Are the M-Audio products no longer compatible with the Mavericks OS? Somebody please help me out! Thanks!

    I had the garageband from 2010 and after I upgraded to Mavericks OS is stopped working. I thought it might be because I hadn't upgraded to the newest Garageband, so I went ahead and upgraded and it still doesn't work.
    Just to be clear, I now have Garageband 10.0.2 and it's not working.
    I believe the M-Audio FireWire Solo is 24-bit/96kHz. So you're saying I need to purchase a new interface? If so, that's a shame.
    Thanks for your help, though!

  • Why won't my airport express work with the latest iTunes, the airport shows green but there is no icon in iTunes any longer, what has gone wrong, desperate!!

    Airport Express used to work with iTunes v11 but now with v12 there is no sign of the little icon that used to appear over the volume button.  The Airport is finding the network, nothing has changed bar the version of iTunes, what should I do??

    A friend has helped me solve this problem, in my case it was nothing to do with Windows firewalls as some have suggested but it was simply a matter of resetting both the router and the Airport, the Airport is fairly obvious but not the router at least this was the first time I recall HAVING to reset it.

  • Why won't my apple tv sync with my new macbook pro, they are both on the same wifi signal

    why won't my apple tv sync with my new macbook pro, they are both on the same wifi signal.

    Not sure of what? In your second response you said the issue was with airplay. You were also having issues connecting laptop to computer, which points to a laptop connectivity issue. I simply asked if home sharing was an issue as well, since that will confirm the laptop as the cause. Your response that home sharing is on doesn't really help since that doesn't itself have a bearing on airplay nor does it answer the question in regards to if home sharing is working on Apple TV
    If you have a further question you will need to be specific.

  • Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?

    Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?
    I really need to know. I have been trying to Pair them but it never shows up on the IPod. Anyone know the problem?

    Is it A2DP?
    The ipod touch does not support telephone headsets, just stereo headsets.
    http://support.apple.com/kb/HT3647

  • Will my old wall charger for Zen Vision:M will work with the (New) Z

    i bought a wall charger from amazon for my Zen Vision: M 30GB, will it work with the (New)Zen? i just bought the Zen 6 GB and it doesn't comes with an adapter, pretty bad move there, well, does it has the same plug? i hope it's compatible. thanks

    sebastiankf,
    That third party adapter from your Amazon link is hard wired specifically for the Vision:M and will not work with any other Creative player unless it has the same pin-outs using the same docking interface. The Creative AC-5V adapters will either have a coaxial power plug connection that will work with most of the Creative hard disk based players, except for the original NJB and Zen Micro, or a USB Mini-B plug that will work with all of the flash players that have a USB connection and the Zen Micro.

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

  • Will HH(Black) BB Talk Phone work with the new AD...

    Hi
    hopefully moving over tomorrow to the new up to 20Mb connection.. question is ..will the HH phone work with the new router that Bt have sent out for the new connection ?  Doesn't appear to be anywhere to connect to the new router like the HH which you can connect it to on the front .. so can it connect wirelessly using the power adapter ??

    None of the BT HH phones will work with the 2700HGV.
    You will need to get a standard wired or wireless phone and connect it to the phone port on the 2700HGV with the included adaptor, then activate BBTalk on the 2700 HGV. Here's the link to the activation help:
    http://bt.custhelp.com/cgi-bin/bt.cfg/php/enduser/cci/bt_adp.php?p_sid=z_6Y-FXj&p_faqid=9916&cat_lvl...

  • My smart cover is not working with the new iPad

    The smart cover for my iPad 2 won't work with the new iPad.  I have verified the toggle is enabled in settings.  Does anyone have a solution or is experiencing the same issue?  Thanks :)

    It's the polarity of the magnet in the older Apple Smart Covers (and many third-party cases and covers) that is causing the problem.  All you need to know about this situation is detailed at my blog post:
    http://markshangout.com/blog/2012/3/17/ipad-3-smart-cover-sleepwake-feature-not- working.html
    Mark

  • Does this iPad 2 case work with the new iPad?

    Would this iPad 2 case work with the new iPad, or any other similar cases that do?
    http://www.amazon.co.uk/gp/product/B00545KFFQ/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=1036 12307&pf_rd_s=lpo-top-stripe&pf_rd_t=201&pf_rd_i=B0050NG1PU&pf_rd_m=A3P5ROKL5A1O LE&pf_rd_r=1DFKVP1TXB9TEN4YGM61
    Thanks for the help.

    If it's made of rigid material (which I think is the case), then, most probably it won't. I certainly wouldn't pay 30 pounds for it just to find out it doesn't work.
    As sagarpachorkar has stated, iPad 2 cases made of non-rigid materials, generally, have a much better chance of fitting the iPad 3 too.

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

  • "Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

    "Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

    Do take a look out there. It is a third party applications so better check out Papers site.

  • My iMessage no longer works with the new is07 update how do I fix this

    My iMessage and some of my applications no longer work with the new software update. How do I fix this?

    I called Apple Support after trying many fixes suggested online. They directed me to the procedure on the following page:
    http://support.apple.com/kb/TS4268?viewlocale=en_US
    I did the erase and restore option they suggested since I had tried a pile of ther things suggested on posts and blogs and they did not work. I even waited the obligatory 24 hours, thus the restore from backup option was what they suggested. I have a 64gig iPhone 4S and it took about 1.5 hours to complete the entire operation seeing that I am using about 54 gigs of that capacity.
    Warning: I lost all of my emails and all of the data files from one of my map programs so be sure you have everything that you really need from your phone store elsewhere before wiping your phone. I thought that the backup on my computer would restore everything but obviously NOT.
    Hope this helps.

  • Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

    Will my HP Officejet Pro 8500 Wireless work with the new Mac OS Lion

    My experience with upgrading from Snow Leopard to Lion is that the OfficeJet Pro 8500 Wireless will print just fine, although it seems to take a little longer to find the printer on the network. My scan function however locks up and will not work. This really is an annoyance, though, since I have VueScan, which works fine with Lion.
    Hopefully, Apple and HP will not orphan the OS native scanning feature for HP multifunction printers.

Maybe you are looking for