Why won't my forward camera work on my iPod touh, Why won't my forward camera work on my iPod touh

Hello. I was recently outside for a good tournament for 6 hours. After about 3 hours my iPod got extremely hot. I had a cooler with a n ice pack inside and I thought it would cool it down. So I put it in their and forgot about it but I took it out after I remembered it. But it got hot again and I did the same thing. But this time it was in there closer. And today I tried taking a picture of myself and the forward camera doesn't open and it goes back to the camera facing away from me. And snap chat doesn't work either now. I don't know if the two are tied together or not. Any help will be much appreciated.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar                       

Similar Messages

  • I have a second generation ipod touch, why won't the ios 5 and ios 4.3 work on ipod touch 2g?

    I have a second generation ipod touch, why won't the ios 5 and ios 4.3 work on ipod touch 2g?

    Wel your "answer" provides not only a bad comparison, but is disingenuous at its heart!
    Apple sold a product (8GB iPod Touch) that one could have assumed to be 3rd generation at the time of purchase (because that was what all the other models of iPod Touch were at the time). Then when ios 4.3 came out, we who purchased one of these units found out that the 8GB Touch was really a 2nd generation model, and it would not ever be updated beyond ios 4.2.1 (8C148). Since the version (4.2.1) is BUGGY, it would be in the best interest of Apple to at least provide a bug-fix update release for these units. It is not like we are asking for all the new features of ios 4.3, just fix the BUGS, please, Apple!

  • ITunes says my computer isn't authorized to play one song, but all the rest of them work. The song works on my iPad so why won't it work on my computer or my iPod?

    iTunes says my computer isn't authorized to play one of the songs I just downloaded, but all the rest of them work. That song works on my iPad so why won't it work on my computer or my iPod? It says my computer isn't authorized to play that song so I type in my password and it pops up with a menu saying my computer is already authorized and it skips to the next song. No matter what I do it won't play that song on my laptop or my iPod.

    Could be a Corrupt download of that song...
    If you live in a Region that allows re-downloading Music...
    Delete the Song(s) and re-download...
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

  • Garageband  4.1.2 won't work in Snow Leopard.  Why? Please help.

    Garageband 4.1.2 won't work in Snow Leopard. Why? Please help.

    It might be a PPC application. You may need the optional Rosetta install.

  • My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

    My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

    Welcome to the Apple Community.
    Delete the apps purchased by your cousin and purchase your own.

  • Since the ios7 update I go to use my camera and switch to video and it won't switch ! ..why is this ? HELP

    Since the ios7 update I go to use my camera and switch to video and it won't switch ! ..why is this ? HELP

    Thanks stedman1 for continuing to push this interface change news...   I must have taken 100 photos last night (of my shoes) trying to switch to video (unsuccessfully).   Very frustrating.
    OTOH, like many Apple interface innovations, it is simple to learn and easy to remember.  
    Honestly, that's all we can ask for, there really ain't no intuitive. 

  • My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera.

    My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera. I plan on replacing this phone with an iphone 5s when it comes out but I need this phone to work until then.

    When you did the restore, did you restore from a backup or restore as new? The final step of user troubleshooting is to restore as a new device, not from a backup. If you restore as a new device and the camera still does not function, it is probably a hardware issue. Make an appointment at the Apple Store Genius Bar and have the device checked by a Genius.

  • I have just had a replacement IPad as the camera stopped working. Now the new iPad won't recognise my aol e mail for face time as well as my apple id. I have tried adding as a second e mail, but it says already in use

    I have just had a replacement iPad as the camera stopped working.
    Now the new iPad won't receive FaceTime calls at my aol.com email.
    If I try to add it as a FaceTime address it just says email address already in use.
    I guess it is still linked to the old iPad in some way
    Any suggestions? The old I pad is wiped and back in the store

    This Apple article should be able to help ya out -> iOS: FaceTime is 'Unable to verify email because it is in use'

  • Why won't Firefox automatically show new Hotmail emails or easilly down load attachments when it was working a week ago?

    Why won't Firefox automatically show new Hotmail emails or easily down load attachments when it was working a week ago?

    Hotmail has been having a few hiccups lately I'm afraid.
    If you don't see any emails when you log in, or nothing appears after some time, click in the middle of the grey bar on the left which has the word "'''Inbox'''" in it. This usually causes them to magically appear for some strange reason.
    I've read on on a few blogs that Microsoft is working on the problem, but don't hold your breath.<br><br>
    If this suggestion resolves the problem for you, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same problem.
    Thanks.

  • My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?

    My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?

    I failed to mention that the sound does play on the videos that are not playing.

  • 5.5G battery in my 5G iPod.  Why won't this work?

    I bought a 5G 30GB iPod around christmas 05. Recently, the HD failed after i dropped it.
    Fortunately, my girlfriend had a 5.5G 80GB with a broken screen that she was using for back ups.
    She gave me the iPod so that i could maybe use her HD in my iPod. I cracked them open and used the Screen, scroll wheel, motherboard from my 5G 30gb, and the HD and battery from her 5.5G 80gb.
    After i put the two back together here is what happened:
    I started up the iPod and the apple logo appeared. Shortly after, a screen saying "Connect to your Computer. Use iTunes to Restore." in about 5 different languages.
    I connected it to my computer, then a message in iTunes showed up saying "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
    I then clicked Restore and entered in my Administrator name and password.
    Shortly after that, an alert popped up saying "The iPod "iPod" could not be restored. An unknown error occurred (1416)."
    This is where I'm stuck. I'm hopping that there are some people on this forum much smarter than i am and who are also willing to help me out.
    Let me know if i can describe anything further to give people more information about my problem.
    Thanks to anyone who can help!!!

    OK, I got the cfdump to display all the form variables, and my submit  button, btnSubmit is there.  But I think that is also the problem.
    In my original action page, I did not have to check for the existence of the submit button, so the codes  below worked :
    <cfif ListFirst(i,"/") is "comments">
    <cfset select_urdn_number = listgetat(i, 2, "/")>
    <cfset select_urdn_line_item = listlast(i, "/")>
    <cfset combineEnd = select_urdn_number & "/" & select_urdn_line_item>
    <cfif StructKeyExists(form, "del/" & combineEnd) and form["del/" & combineEnd] is "Yes">
    Now when I submit the form to itself, I have to check for the existence of the submit button and that gives me an extra form variable, so
    <cfif ListFirst(i,"/") is "comments"> will fail since it is no loner the first variable.
    So instead of performing listfirst, how can I find the comments in the form variables, so that I can continue to perform the other steps after ListFirst,
    to get all the information that I want ? I need it broken up like the above in order for the form to process correctly.

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

    I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

    Yes.  A couple of ways that might work.
    First Way
    What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence.  Does it display correctionly? 
    OK, select the clip in the hd timeline and copy (command-c).  Now go to the HD sequence with the material that's distorted.  Select all (command-a) and paste attributes (option-v) and choose basic motion and distort.  That should maek things work.  What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence.  That I'm pretty sure you'll have to redo.
    Second Way. 
    Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline.  You then should be able to reconnect these clips with your original HD media.

  • I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File - Library - Organize library. I am suppose to check mark both boxes there, It won't allow me to check mark the second box, why? How to fix this.

    I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File ->Library ->Organize library. I am suppose to check mark both boxes there, the first being "Consolidate Files" & the second being "Reorganize files in the folder 'Itunes Media'. I am able to checkmark the first box but It won't allow me to check mark the second box, why? How can i fix this? Please help!

    Well you must have made a mistake somewhere. The last instruction of step four reads:
    When you've found your iTunes library folder, drag that folder to your external hard drive. This will begin the iTunes backup. The amount of time the backup will take depends on the size of your library. When the transfer is done, your backup is complete and your external hard drive can be disconnected.
    Normally dragging content from to a new location on a different drive will result in a copy action which is what you were supposed to do. At a guess you somehow managed to move the iTunes folder. Then when you started iTunes it created a new blank library for you assuming it had just been installed rather that raising a warning.
    Close iTunes. Rename the iTunes folder on the internal drive as iTunes (Empty) then copy the iTunes folder from the external back into the User's Music folder. Start iTunes. All should be well.
    When you've made sure it all works please read my User Tip and use that method to backup in future. Since you already have a folder with the backup in place you can skip the "Make New" operation in the fourth step and simply choose the external folder.
    tt2

  • Iphoto will no longer recognize my camera, says it does not recognize the format....they are jpegs? And now it will not even open when I plug my Canon Eos Camera in to download. I have checked everything on the camera and it is working perfectly....

    Iphoto will no longer open when attaching my Canon Eos Camera. I have checked the camera and everything is working perfecty. When I open it myself, Iphoto is working perfectly too. But now when I attach the camera, Iphoto no longer opens at all. Yesterday it did open after a really long wait but it kept saying that it did not recognize the "format" of the images....they were jpegs??? Then it flashed on and off and if I hit download at just the right second they would download. But today it won't work at all. Any suggestions.
    thanks

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW

    Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Trying to update to camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the updater say I have the latest update! Witch I clearly don't have . And my Photoshop have to different camera RAW plug-ins. The old 8.4 and the new 8.7. But it doesn't work. Have removed and reinstalled several times. What is going on? Why can't I update bridge to the latest version 8.7 or read my raw files from the Canon 7dmk2?

    Try this:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

Maybe you are looking for