Why won't my "if" expression work?

This calculation works:
IF(A3<1,A3*10,IF(A3<5,20))
Why won't this one:
if(A4<1,B4==0,if(A4>1<=2,40,if(A4>2<=3,60,if(A4>3<=4,100,if(A4>4<=5,125)))))
If you want me to send you the table that I am trying to make this work in, just let me know. Thanks,
Elaine.

Never mind, I figured it out! Whew.

Similar Messages

Why won't my airport express work with sky router

Im not sure if its possible but i am trying to connect my Airport Express to my Sky (G) router so i have a better wifi signal in the bedroom the other side of my house, will sky routers not actually work with anything not supplied by Sky or is this rubbish? Any help would be great please?

will sky routers not actually work with anything not supplied by Sky or is this rubbish?
A Sky Support Forum could probably best answer that question.
We can say that the AirPort Express can only "extend a wireless network" using wireless only provided that the "main" network is being produced by an Apple router. As far as we know, the Express is not compatible for this purpose with routers from other manufacturers.

Why won't my airport express work with iPad and iPhone?

I have my internet line coming into the basement. Its been hardwired from the basement modem to an airport extreme upstairs, but we sleep in the basement and the wifi is bad. I have a 1st gen airport express. So my idea was to put the extreme down with the modem, and run the hardwire to the express upstairs. I did this and my laptops and iMac got the same signal as when the extreme was upstairs, but my iPad mini and iPhone only have two bars unless you stand 5 feet from the express. Macs get about 48mbps, iDevices about 20mbps. 15 feet away on the porch the iPad won't even pick up the signal. The apple store advised I put the extreme back upstairs, and the express downstairs wirelessly. They said the iDevices may have been ignoring the express and trying to get the signal from the extreme in the basement.
Is there any way to use the express and the extreme to get solid signals up and downstairs? My fear is apple once again boned me and wants me to buy a new express.

If it's the original b/g only model its model number will be A1084 or A1088. It appears in the red box as shown below:
To configure one of them requires an older version of AirPort Utility. Check its model number.
It should not be necessary to connect it to your Mac with an Ethernet cable. Connect it directly to the Extreme, "hard reset" it again if necessary, then launch AirPort Utility.
It should appear in your Mac's Wi-Fi menu as "New AirPort Express...". Select that and proceed to answer the questions.
The AirPort Utility setup page with the words "using Ethernet" is as shown:
Its appearance in AirPort Utility will show it connected to the Extreme with a solid (not dashed) line.

Why won't my airport express work with the latest iTunes, the airport shows green but there is no icon in iTunes any longer, what has gone wrong, desperate!!

Airport Express used to work with iTunes v11 but now with v12 there is no sign of the little icon that used to appear over the volume button. The Airport is finding the network, nothing has changed bar the version of iTunes, what should I do??

A friend has helped me solve this problem, in my case it was nothing to do with Windows firewalls as some have suggested but it was simply a matter of resetting both the router and the Airport, the Airport is fairly obvious but not the router at least this was the first time I recall HAVING to reset it.

Why won't my airport express work as a network extender since upgrading to iOS 6?

I have the AirPort Extreme as my. Network and the airport express set up as my network extender. However, since I upgrade everything to IOS6 my airport express is no longer acting as the network extender. How can I fix this issue?

I have an iMac, iPad, Apple TV and Panasonic tv on my network. The apple tech when I first bought the extreme 2 months ago had me set up the extreme as the main network and the. Airport express in a different part of my home as the extender to my network so we could use the wifi outside to my entertainment area and now to get wifi outside since upgrading my devices I can only get wifi outside if to stand next to the back door.

Why won't my airport express turn on after thunder storm ?

Why won't my airport express turn on?

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.
If none of the above helps, you may well have a harware problem.

Why won't my airport express allow internet connection on TV blu ray? I have internet connection on iMac

Why won't my Airport Express allow internet connection on my Blu Ray when there is internet connection on my IMac?

I'm guessing you only have the modem/router supplied by your isp and the Airport Express. Is the Airport Express connected to the modem/router with an ethernet cable? If not, plug one end of the cable into an available port on the modem/router and the other end in to the WAN port, indicated with a dashed circle, on the Airport Express.
Have a nice day.

Why won't my airport express keep its connection?

Why won't my airport express keep its connection?

What is the AirPort Express not keeping a connection to? Another wireless router or your MacBook Pro?

Why won't my iTunes code work

Why won't my iTunes code work helpppp

Hi Benrad09,
If you are having issues redeeming an iTunes Gift code, you may find the following article helpful:
Apple Support: If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021
Regards,
- Brenden

HT4972 Why won't Kindle or instagram work on my I-Touch? Why do either of them require IOS 4 or 5?

Why won't Kindle or instagram Apps work on my I-Touch?
Why do either of them require IOS 4 or 5 and why can't Itouch V2 update to IOS 4 or 5 operating systems?

1. The developer stopped supporting older iOS versions.
2. A second generation iPod touch can be updated to iOS 4.2.1 but doesn't have enough RAM to run iOS 4.3 or newer.
(82591)

WHY WON'T STICKY KEYS ACCESSABILITY WORK ON SAFARI/

WHY WON'T STICKY KEYS ACCESSABILITY FEATURE WORK ON SAFARI? I AM A DOUBLE AMPUTEE AND THIS FEATURE REALLY HELPS ME.
RANDY

Do us all a favor, and unlock your Cap keys. It's considered yelling, and it's a real turn-off for those looking to help posters here.

Why won't my lock button work?

I went to lock my iPod and my lock button won't work. I can't even push it down, it's like stuck down in the hole but it won't pop back up. Everything works fine but I have to wait for it to auto-lock everytime I want to turn it off. Why won't the button pop back up?

It looks like you have a hardware issue. I don't know why the button doesn't pop up, but You can enable assistive touch. Assistive touch gives you a virtual lock button, so that will solve you problem. You can enable it by going to Settings->General->Accessibillity->AssistiveTouch->On.

Why won't megapack for iworks work on my mac?

Why won't my megapack for iworks work on my macbook pro?

only pages will work and its crap...what a waste of money.

Why won't time capsule router work?

Why won't the time capsule's wireless router work to allow internet access? Just got it, new 2 tb! Lost the excitement of it all now! Help! Connecting to new MacBook pros (13" & 2X15"s) as well as a Toshiba laptop. Followed all the directions and backed up just fine, but have not been able to browse web at all with this crap!

You do not have to load the airport utility.. a newer version is already included on the computer.
Just go to the applications / utility directory and start airport utility.

Why won't combined AND statement work

I want to exclude records based on two criteria's: status = 'M' and the status reason = 52.
The table contains records with status = 'M' and status reason other than 52.
Also the table contains records with status other than 'M' and status reason = 52 and I want to include those records.
I first tried using the statement below reasoning that placing the two criteria's in parenthesis would combine them and only exclude records with M 52
Where (nvl(Status_CD,'A') <> 'M' AND nvl(STATUS_RESN_CD,0) <> 52 )
However the query removed all records with Status_CD 'M' and all records with Status_Resn_CD 52.
Using the Where Not statement worked.
Where Not (External_Status_CD = 'M' and EXT_STAT_RESN_CD = 52 )
I’m curious why the first statement didn’t work?
Can anyone explain why the first query didn't combine the 2 statements but a Where Not did?
Thank you - Mark

HI, Mark,
markjames9 wrote:
I want to exclude records based on two criteria's: status = 'M' and the status reason = 52.
The table contains records with status = 'M' and status reason other than 52.
Also the table contains records with status other than 'M' and status reason = 52 and I want to include those records.
I first tried using the statement below reasoning that placing the two criteria's in parenthesis would combine them and only exclude records with M 52
Where (nvl(Status_CD,'A') <> 'M' AND nvl(STATUS_RESN_CD,0) <> 52 )
However the query removed all records with Status_CD 'M' and all records with Status_Resn_CD 52.
Using the Where Not statement worked.
Where Not (External_Status_CD = 'M' and EXT_STAT_RESN_CD = 52 )
I’m curious why the first statement didn’t work?
Can anyone explain why the first query didn't combine the 2 statements but a Where Not did?
Thank you - Mark
Another way of looking at it:
The condition (x AND y) will be TRUE when both x AND y are TRUE.
If
sub-condition x is    nvl (Status_CD, 'A') <> 'M'   and
sub-condition y is nvl (STATUS_RESN_CD, 0) <> 52
then any row with status_cd = 'M' fails sub-condition x, therefore the compound condition is FALSE, regardless of status_resn_cd.
Likewise, and row with status_resn_cd=52 fails sub-condition y, so the compound condition is FALSE regardless of status_cd.
You used status_cd and status_resn_cd in one example; but
EXTERNAL_status_cd and EXT_stat_resn_cd in the other. That's quite confusing. Also, you'll confuse everyone (including yourself) if status is abbreviated as stat in some places but not in others. Either way is okay, but be consistent. The same goes for abbreviating external as ext; pick one or the other, and use the same word in all places.
Don't forget to check for NULLs. If external_status_cd and ext_stat_resn_cd can be NULL, you should say
Where Not (    NVL (External_Status_CD, 'A') = 'M'
          and NVL (EXT_STAT_RESN_CD,    0) = 52
depending on your requirements.

Why won't my "if" expression work?

Similar Messages

Maybe you are looking for