Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

Hello Jesslb23,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Best of luck,
Mario

Similar Messages

  • Why won't firefox 9 work with Zonealarm?

    Why won't firefox 9 work with Zonealarm?

    You got a reply in your earlier thread here: https://support.mozilla.org/en-US/questions/910967

  • I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

    I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

    I was premature in posting the question. I found the answer in andother posting, and it was successful.
    Thanks, and sorry for the false alarm.

  • My imsg is not working with only one person and her imsg is working perfectly fine with her friends

    My imsg is not working with only one person and her imsg is working perfectly fine with her friends

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    From Apple:
    MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
    Yes, a fix is coming soon.

  • I have had i phones for the last six years and i just bought the iphone 5. I tried to download a paid application and for the first time i am asked to answer my security questions which i don't remember. In order to reset my question i need my rescue emai

    I have had i phones for the last six years and i just bought the iphone 5. I tried to download a paid application and for the first time i am asked to answer my security questions which i don't remember. In order to reset my question i need my rescue emai,which does not exist.can anybody help????

    That is normal for purchasing apps for a device not previously associated with your Apple ID.
    You will need to contact iTunes Store Support here: http://www.apple.com/emea/support/itunes/contact.html

  • I've had my itunes account for about a year now, and I just got the iPhone 5s.  All the music I've bought has downloaded onto the phone, but the cds I burned a few months back aren't in my music library on my phone. The sync button is gray.

    I've had my iTunes account for about a year now, and I just got the iPhone 5s.  I logged into my iTunes account on my phone just fine, and all the music I've bought on iTunes has transferred to my phone, but the cds I burned haven't.  The sync button is gray so I can't click on it. The songs from the cds on iTunes are checked and should sync but haven't. Please help!

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • For about 3 month I receive on my iPhone 3GS iOS6 and my iPad iOS5 empty messages without sender and subject in the mailbox BAL but not in the direct mailbox addresses. I cannot get rid of this messages. Can someone help me.  Thanks

    For about 3 month I receive on my iPhone 3GS iOS6 and my iPad iOS5 empty messages without sender and subject in the mailbox BAL but not in the direct mailbox addresses. I cannot get rid of this messages. Can someone help me.  Thanks !

    Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.

  • Why won't music match work with my Sonos system now?

    I updated my iTunes to music match, because I added a new computer for my wife and she wanted easy access the music library.  I used the music match and the iCloud to make it easier to get the music on the new computer.  It was fairly simple to set it up, however, when I installed the sonos controller on the new computer, it couldn't find the music library.  Why won't my sonos work, when I can see the music on iTunes in its library.

    Maybe the speakers are not compatible with your computer.  Contact the manufacturer.
    You can try Resetting your Mac's PRAM and NVRAM to see if that resolves the issue.

  • Why won't my Mac work with a Canon i860 Printer?

    I think it used to work, but I haven't used this printer in a while. I remember buying a cord from the Apple store for it, but I just keep getting a #306 message to check connections and make sure everything is powered on. Everything seems to be set correctly, so why won't it work? Any ideas?

    Contact Canon or post in their forum area.

  • My iMessage freakishly stopped working with only one person?

    First off I was sending my boyfriend pictures and he didn't recieve them (iMessage was working fine) and so I turned my phone off too. After a few minutes my iMessage turned off and my messages were being weird. I turned my phone off twice and it was still the same. So I turned off my iMessage in the Settings and turned off my phone again and now it still won't work. I can send emojis to him and he gets them but when he sends them they come out as &: and I don't know what's going on.. Help me fast please.

    Hi BKalafut,
    Thanks for visiting Apple Support Communities.
    I recommend trying these steps, first with the group message, and then with the contacts who are in the group message:
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    You can find these steps here:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    All the best,
    Jeremy

  • Why won't this scriipt work with Firefox? embed src="News2008Fall.pdf" width="615" height="3200" /embed

    Please tell me why this script won't work with Firefox. It works with Safari. Here is the page that includes the script: www.lionsgatehoa.org/newslettertest.html. Thank you. Tom Engleman
    Here is the script in my html document:
    <embed src="News2008Fall.pdf" width="615" height="3200"></embed>
    edit: removed phone #

    Works for me on Linux.<br />
    Your system details list doesn't show the Adobe Reader plugin, so you will have to (re)install that program.
    See:
    *https://support.mozilla.org/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    *http://kb.mozillazine.org/Adobe_Reader
    *http://get.adobe.com/reader/otherversions/

  • Why won't 'Speakable Items' Work with USB Audio Input Device (Lexicon Lambda)?

    I am new to Apple Macs, yay for me!
    I really want to use the 'Speakable Items' feature but unfortunately it just won't work with my Lexicon Lambda external USB Audio device.
    Now, the Lambda is plugged in and working, and I know this from using the "Diction' feature which works perfectly.
    When I go to System Preferences and click on accessibility>'Speakable items' and I turn on speakable items, I notice that under 'microphone' I'm unable to calibrate the microphone for some reason (if that's at all relevant).
    I follow the instructions and have been asking 'what time is it?' and nothing happens
    Any ideas?

    I'm having the same problem, using 10.8.4. I have been using Speakable Items for a long time, but it's not reacting at all anymore. I'm on a Mac Mini and have tried several inputs, that all work with dictation, and are selectable inputs for Speakable Items. Zoom H4N, Apogee Duet and an UAD Apollo. The only problem I can see, aside from something in the OS, would be that I have SoundFlower and WavTap installed. Will try uninstalling them, to see if that helps.

  • Why won't my music work with iOS7?

    I recently imported Now 87 Disc 1 onto my iPhone 4S with iOS7.1. I imported the music onto my PC with iTunes 11 and put it onto my iPhone with CopyTrans Manager v1.002. I opened the Music app on my iPhone and when I opened Now 87 [Disc 1] not only was the artwork missing but I found that the tracks names were grey and next to each of them there was a red circle with a red square inside of it. When I tried to play the album it skipped all the tracks. Just to be clear, the music is from a CD. I bought it a couple of days ago and when listening to it on my stereo didn't experience any issues at all. I also had enough storage to fit the album in there.
    Thank you for listening to my iPhone/iOS 7.1 troubles.
    Yours sincerely,
    bex1377.
    Good day.

    Hi bex,
    You should post your issue to the CopyTransManager support site. It is not an app from the App store, so we wouldn't be able to help you.
    Cheers,
    GB

  • Why won't Firefox 5 work with Mail Chimp?

    Why doesn't Firefox 5.x work with MailChimp. Edit screens and tools in MailChimp worked fine in Firefox 4.x, but not in Firefox 5.x. In Firefox file, the "edit" screens for the MailChimp email editor display blank pages with no tool bars. Have to go back to Internet Explorer 9.x or Google Chrome in order to edit in Mail Chimp.

    See http://kb.mozillazine.org/Firewalls there a special
    section within for Zone Alarm.

  • Why won't Cinematic Display work with Macbook OSX 10.5.8?

    I have the 27" Cinematic Display - just got it a couple mont. Works fine with my MacBook Pro. So far we have had no luck getting my wife's MacBook 2.4 gig Core Duo running OSX 10.5.8 to detect the display when we plug in the mini port. Is there a way to manually get it to detect the screen or is there something I'm missing?
    Thanks in advance!
    Jeremy

    The store says it requires 10.6.4 or later, and so one has posted a question or answer to the contrary.
    The biggest mistake users make with Mini DisplayPort is not pushing the cable-end into the port all the way. It must be inserted until "essentially ALL of the metal part disappears inside the socket".

Maybe you are looking for

  • Automate web photo gallery in PS Elements 7

    New user here. I bought Photoshop Elements 7 specifically for the web photo gallery, which works fine in Elements 6 (but I don't own a copy of 6). My installation of Elements 7 has the Automation tools option in the File menu greyed out. It looks lik

  • System Preferences help

    Hope someone can help I am using 10.5.8 on my mac book pro currently. My Desktop and Screensaver tab under System Preferences is gone, just totally missing. I am stuck with a generic blue back round that I cant change. I tried creating new admin acco

  • Export with all objects and only some table data

    Hi, can we use exclude and include both at a time.Because I want export full schema but data required only some 5 table, Is it possible. please share expdp and impdp query. Regs, Brijesh

  • Maximum number of emails

    Hello there, i just had implemented a small program to send emails via Java mail, and i have a question: - What is the maximum number of e-mails that i can send once i run my servlet? (I mean how many senders i can have in the same time) Thank you fo

  • Error 800f0922 when adding Print Services

    I have two Windows 2012 R2 servers having the same problem. I removed the Internet Print Service from one of them to troubleshoot a problem and when I try to add it back I get an error that doesn't say very much. (Unable to complete installation. Err