Why won't my install disk enter the disc drive?

I'm trying to put an install disc into my MacBook to load my OS X onto my new hard drive. I currently have a flashing question mark in a folder on the screen which I understand is normal when you insert a new hard drive. My computer will not accept the disc. I have never used the disc drive, so am I supposed to push it in all the way or does it sense the disc as it is starting to be put in and will try to pull it in? I don't want to force it in without making sure because I want to make sure everything will go right and that there is nothing wrong with my MacBook.

Does it feel like the disc is hitting something? If not try pushing the disk in as far as it'll go and hold it there while you press the power button. The drive should suck the disc in as the computer starts up. As soon as it does press and hold the C key to start up from your install disc.

Similar Messages

  • Why won't my Macbook Pro read the SSD drive when I install it?

    When I installed my new Kingston SSD drive and tried to re install Mac OS Snow Leopard from the disk,  it did not read or see the SSD drive.  I had to re install the old HD and continue using that.  Any ideas?
    I have a MacBook Pro 13 inch Model mid 2009 running Mac OS X Lion 10.7.1 (11B26)
    It is a Kingston 64gb SSDnow SNVP325-S2/64GB

    I have similar situation but (see also my other post) am not able to boot up from Snow Leopard installer disk (keep getting kernel panic, even on other laptops trying to boot on same Snow Leopard installer disk).
    Any ideas on how to get the SSD formatted or how to avoid kernel panic with my Snow Leopard installer ?

  • Why were no system/install disks shipped with system?

    I received a brand new Lenovo system with Windows Home Basic install from telus, and the was only an install disk for the monitor. Why was the registered copy of Vista not shipped with the system? If the HD was damaged in the shipping and I had to replace it, how would I install the operation system?
    System details
    Machine type/model: 9686-A12 Serial number: Lxxxxxx   Operating system: Windows 6.0 Home Operating system version: 6.00
    Is there a way (Other than recovery disks) that I can get this? I went to make recovery disk and it asked for over 32 CD's. This is not right. This is plain silly as I wanted to remove all the shareware software that I did not want or will never use.
    Any help with this would be greatly appreciated.
    Thanks in advance,
    John Freeze
    Moderator Note; s/n edited for members own protection
    Message Edited by andyP on 08-15-2008 08:35 AM

    Thanks for the reply. Sorry for the time it took me to get back to you. (My mother past away and all thoughts about the puter went from mind).
    Again, thanks for the Info.
    Take care
    John Freeze

  • WHY WON'T CLOUD INSTAL ON SECOND COMPUTER?

    WHY won't cloud instal on second computer..it just says over and over failed?

    attach a screenshot of the error message, http://forums.adobe.com/thread/963429

  • . . . was wondering: Would you happen to know if, Adobe CS5 Design Premium in compatible or incompatible with MS WIN8.1? I bought a new Dell XPS 9530 -- with NO CD drive. I copied my CS5 install disk to a Flash Drive, then ran the "install" on my new

    . . . was wondering: Would you happen to know if, < Adobe CS5 Design Premium > in compatible or incompatible with MS WIN8.1? I bought a new Dell XPS 9530 -- with NO CD drive. I copied my CS5 install disk to a Flash Drive, then ran the "install" on my new computer. I had the ownership S/N, so-o-o-o, CS5 installed and "seems" to respond well. PROBLEM: PhotoShop. The Menu Bar, the Commands, the Tool Bar, the Color Palettes, and etc., etc., are all real small on my display -- I would estimate they are about 1/3 of the normal size. Same problem with Illustrator. I've made all the Screen Resolution and Print-Size settings and nothing remedies the small display. (My working page is fine; it's just the display that is REAL tiny!!) Can you help me? Do you have any suggestions for me to try? Should I re-install from the internet? Am I forced to upgrade my application? I appreciate any comments you might have. Thanks. -- Dennis

    @saratogacoach,
    The key log entry is the following:
    Feature: Microsoft_VC90_CRT_x86_
    Action 10:31:26: PublishProduct.  Publishing product information
    [    5888] Thu May 06 10:31:27 2010   INFO
    .An error occurred during the installation of assembly  component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x80073712.
    Action  ended 10:31:27: InstallFinalize. Return value 3.
    First, see if this hotfix maybe applicable to your system
    http://support.microsoft.com/kb/946927
    or this one:
    http://support.microsoft.com/kb/902330

  • I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information.  Im based in Japan but my card is registered to a UK address.  the fields only allow for a Japanese style address and postco

    I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information.  Im based in Japan but my card is registered to a UK address.  the fields only allow for a Japanese style address and postcode.  What can i do to complete the payment and get photoshop!

    As far as I know, your registered location and your credit card information must match... but,
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?

    Why won't Acrobat X Pro honor the margin (art box) from PDF's exported from InDesign CS6?
    When I export a PDF from InDesign CS6 with specific margins, Acrobat does not recognize the Art box. (I have PitStop Pro 11 for page box view)

    Thanks Steve,
    We are exporting PDF's as you indicate. I see the same thing. The boxes are all the size of the original InDesign document. The PDF art box should be predicated by the margins in InDesign. When we had CS3, this worked great. Now, it seems that there is a disconnect between the two Adobe products honoring the page box size. I have contacted the Adobe techs via chat, and they had no clue what I was referring to. I find it mystifying that Acrobat can not interpret the art box set in InDesign as margins.

  • Why won't my Apple TV display the setup screen?

    Why won't my Apple TV display the setup screen? I have changed hdmi cable, confirmed the correct input, checked connection but nothing. HELP!!! I have a Bose System and use a universal remote, Logitech. Could this be a factor?

    Welcome to the Apple Community.
    What exactly does your Apple TV display.

  • HT1338 Why won't my computer pick up the wireless in my home? All other computers in my home can get internet

    Why won't my computer pick up the wireless in my home? All other computers in my home can get the internet.

    Turn Off your computer. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your computer. Hopefully it will see the WiFi.
     Cheers, Tom

  • I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive.  Why?

    I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive. 
    I have pressed "C" during boot to force it to boot from the Optical Drive.  It boots normally.
    I have pressed "option" to get the boot menu.  The only option available is my hard disk drive.
    I have pressed "option""command""shift""delete" at the same time during boot to force it to skip booting the hard disk.  I get a blinking smily face/question mark for a while, then it shows the boot menu, at which point the only available option is my hard disk drive. 
    In system preferences in OS X I have looked to change the boot drive, but the only option, again, is the hard disk.
    Can I not boot from the Optical Drive?
    Why?

    Hello,
    From the link I provided it says:
    Nearly all open-source software is available to download from the Ubuntu repositories, but the amount of proprietary software available for PowerPC linux is limited. You will have the same version of Firefox, LibreOffice, etc as other architectures.  
    Notable absentees are: Chrome/Chromium, Adobe Flash (although open-source alternatives are available, see below), Wine (however Qemu can be used, see below), ndiswrapper, proprietary video drivers and Dropbox (but, you can use Ubuntu One).
    I do recall it being very limited when it came do downloading Linux software that supported PPC.
    You wouldn't be any better off than using firefox or safari on Mac OS X 10.4.11.
    If your looking for a faster and more compatible web browser then I would suggest the following, which I've recently found very useful on Mac OS X 10.4
    http://www.floodgap.com/software/tenfourfox/
    Hope this helps.

  • Why won't my screen turn when the phone does?

    why won't my screen turn when the phone does?

    Not all apps support screen rotation. The Home screens do not rotate. But also check to make sure you have not locked screen rotation. Swipe up from the bottom of the screen to reveal the Control Center and check that rotation lock is not on.

  • Why won't my iPhone connect to the Internet? It will goes days with no connection, then suddenly have a connection for a while. I am on the Sprint network.

    Why won't my iPhone connect to the Internet? It will goes days with no connection, then suddenly have a connection for a while. I am on the Sprint network.

    Have you contacted Sprint?  See if they can resolve your issue, if you can't get 3G.

  • Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipa

    Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipad2 has been an error?

    Hello joe2616,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your Wi-Fi network is dropping, please follow the directions outlined below.
    Symptom: The network connection drops unexpectedly
    Your Mac may not not stay connected to your Wi-Fi network reliably.
    Your Mac may stop accessing the Internet during use.
    Solution
    Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
    Check your range to the Wi-Fi router and reduce the effect of interference.
    If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
    Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Why won't iPhone 4 charge in the car

    Why won't iPhone 4 charge in the car anymore?  I have changed out the cords several times. It's a Belkin...bought at the apple store...not a cheapo!

    Car chargers tend to break down frequently
    buy a new one
    Strongly recommend buying on eBay a few units at a discounted price

  • I just downloaded a registered copy CS4 Production Premium. I started the install. Entered the serial number

    I just downloaded a registered copy CS4 Production Premium. I started the install. Entered the serial number and Select "I have a SN...". On the next page the installer thinks I am upgrading and wants the "old" application & it's SN. What do I do now?

    WkgrayCS4 you will want to enter the serial number for the version you are upgrading from.  You can find your registered serial numbers at http://www.adobe.com/.  Please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html for more details on how to locate your previous version serial number.

Maybe you are looking for

  • Edit photos in external application: Pixelmator

    I'd like to set Pixelmator as the application which opens when I want to edit photos in an external application. Presently the choice I have in the drop-down menu is only Photoshop. How can change this since there is no option to choose the external

  • I want to change Apple ID

    Can U help me.I want to change my Apple ID

  • Assigning of a new position

    dear All, I am tryng to create a position (O-S-P)and i did it for HR manager. Same way i had created  EEgroup n subgroups and assigned then with respective conditions. but still it stating a message that "No entry in table T503 for SSH (S is EG an SH

  • Sending a Socket Object via a Socket :P

    eek Sorry all! I accidentally posted in "Java Programming" 1st... I don't know how to delete my post http://forum.java.sun.com/thread.jspa?threadID=5261765&tstart=0

  • After Effects Crashes and Can't Find My OpenGL Card?

    I have After Effects CS5 (latest version) and it crashes whenever I try to add the "Knoll Light Factory" effect into my composition.  Sometimes it will let me add the effect only to crash after I move or mask the layer.  It tells me: , , and when it