Why won't my ipad work after installing iOS 6???

I upgraddd to iOS 6 on my ipad 2, and got as far as signing into my yahoo in order to include icloud, etc, and it kept timing out.  Eventually, it allowed me to skip that step, but I can't do anything with it anymore.  I got the Ipad so I wouldn't have to deal with this kind of thing.  What do I do to fix it? 

Perform a Reset... Try again...
Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Similar Messages

  • My ipad 2 won't hold a charge after installing ios 7

    I use the authentic Apple charger and my ipad 2 won't hold a charge after installing ios 7. What is the fix for this miserable wasteful upgrade that made all of our iPads unusable ! I Shut off location, turned off  brightness, shut down and  took off apps.  WHAT NOW for my iPad ?

    Batteries eventually fail, and it sounds like that's happened with your iPad. You'll need to take or send it Apple to get the battery replaced. See:
    http://www.apple.com/support/ipad/repair/battery-power/
    Regards.

  • How you close an application on ipad 4 after installing ios 7

    How you close an application on ipad 4 after installing ios 7

    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.

  • IMessage and push notifications not working after installing iOS 7!!

    My iMessages and push notifications don't work after installing iOS7..!!! I can't even log in to iMessages using my Apple ID.. And every time I log into Facebook or whatsapp it keeps telling me to connect to iTunes to receive push notifications..!!
    I connected to iTunes on my comp and tried resetting my phone.. Nothing works!! HELP

    Its stuffed, iMessage and facetime are both sitting on "waiting for activation" so they are not working, 1 post suggested resetting the phone again setting up as a new phone and then turning iMessage and Facetime on and then restoring.  After the reset iMessage and Facetime started working, I did the restore and it stopped working again.  Nice waste of 2 hours.

  • Volume buttons don't work after installing ios 7.0.4

    I have an Iphone 4 (MC603B/A) and after installing IOS 7.0.4 the volume buttons and the mute switch don't work. Also, if I receive a call or a message I don't get any sound.
    There is no sound either if I play a video. At the same time, the alarm does work and the voice in the GPS works also.
    Any ideas on how to resolve this issue?
    Thanks

    I have exact the same problem as you! Soon I will go to an Apple Genius Bar. When I got the solution, I will tell you!

  • Push notifications not working after installing IOS 7.1. Need your help.

    whatzapp is working, push SMS notifications have completely gone after installing IOS 7.1

    I'm having the same problem. No SMS sound alert and no npush notifications since upgrading to iOS 7.1
    Made all the verifications in settings and it's all fine, still having the issue and it's annoying.

  • Faults in iPad 2 after installing iOS 6' ??? why

    After installing the new OS 6.q.1,  last week, several glitches ie Music files don't open and the app freezes, hotlinks in Mail freeze both Mail and Safari -  will reinstalling OS cure this ??.?

    No Apple employees here. Just other users like you. Many of us have had no problems at all.
    In order do this.....
    Quit all apps completely and reset the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    For the stalled downloads, try a couple of these things.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

  • Why won't logic 7 open after installing PT LE 7

    does anyone know why logic 7 isn't opening after i installed PT LE 7? i just upgraded to tiger and PT 7 but now my Logice 7.1.1 won't open. it freezes while trying to start up and then i have to 'force quit' in order to shut it back down. any help would be greatly appreciated.
    thanks,
    david

    Pro Tools LE and Logic Pro don´t have anything to do with each other. Installing PT LE 7 shouldn´t change anything with your Logic setup, unless of course you use your digidesign hardware in Logic as well.
    If you use the digi hardware as your interface in Logic, try to drag the digi core audio driver out of its folder and try to start Logic again. The digi core audio driver used to cause a lot of trouble.
    Also, if you had Logic on your system before, try to throw away all its preferences, especially the Logic PM data! Check the prefs folder in the system (root) folder and your user prefs folder as well.
    Toby

  • Why Mac Help doesn't work after installing Leopard?

    After installing Leopard Mac Help shows a untitled window and after few seconds it disappear.

    Actually no. I'm working on the same environment before installing Leopard. No firewall...but I'm working from China where a massive Great Firewall is controlled by the government. That case I shouldn't be the only one.
    Fernando

  • Ipod touch 5 won't work after installing IOS 8.2

    I had gotten my Ipod in February from my boyfriend (he bought it brand new from Amazon). Recently, I had tried to install IOS 8.0.2 (the newest one) and I had accidentally shut it down, thinking it would stop the update. Boyfriend told me nothing about not updating it and just waiting. But now it refuses to turn on. there are times when it has the apple logo and it stays for a good 15 seconds but sometimes it will fade away completely. We have tried everything. The Itunes will do the restore thing but then at the end, it will say it can't finish. Help!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Apps don't work after installing ios 6

    after I installed Ios 6 on my ipod touch 4th two wks ago none of my apps work correctly and I can't even connect to app store or itunes. I get an error "cannot connect to itunes".. also can't connect to safari. I sent my ipod over to apple but because i have physical damage they would not repair. I had no problems with it until i installed ios 6. i have restore back to new and still same issues.  thanks for any help! 

    If you still have the problem after restoring to factory settings/new iPod that indicates a hardware problem.

  • Video camera doesn't work after installing IOS 7

    I can't use video camera with iPad 2 after upgrading to IOS 7.
    Anyone knows why?

    Nice one, Apple. Swipe to change between camera and video and disable tapping on the word "video" because tapping makes sense and is easy enough for even a 5 year old to understand. Don't be Microsoft and make things harder to use. Keep the swipe if it satisfies your sense of feeling all modern and relevant, but put back the tap on "camera" and "video" so we don't have to Google it to figure it out and leave irate notes in your product forums. Missed a really cute video of my toddler singing thanks to you.

  • Why won't Flash Player work after I have installed it?

    I have installed Flash Player 12 successfully and use Internet Explorer 11. I have also checked that my add-on is enabled for Flash Player but whenever I try to see a website that requires Flash Player or a movie that requires it, I am tole that it is not on my PC. I check in my programs and have uninstalled it and re-installed it a number of times but always the same. Can anyone help?

    I am waiting for an answer from Adobe.

  • Why won't SSH/SFTP work after the 10.6.8 update?

    I've tried just about eveything I can think of and have been googling information for awhile now but I figure I just ask the community!
    I just recently updated to 10.6.8 and now I cannot remotely log into our Linux machine running RedHat. Strange because my computer is the only one that seems to have a problem with this and it was working just fine before the update. Sometimes I'll get a "Connection Refused" error msg and other times I'll get a "Connection Timeout" error msg. I typically use the NoMachine NX client to log in, but even the ssh commands from the X11 or Mac terminal give me the same error messages. Anyone have any idea what's going on? Any help is appreciated, thanks!!

    Bloblo63 wrote:
    Unfortunately... the MBP shut down after some minute... also in safe mode !!!! The problem is not solved !
    Next step, boot in safe mode again and log in do this first:
    On the menu bar go to the "Go" option menu.
    Then go to utilities.
    Open disk utility
    Click on your Mac OS X Partition (Macintosh HD in most cases)
    Click "Verify Disk"
    If the results say "Macintosh HD appears to be OK", run it a second time just to make sure.
    If the volume structure is OK then click the "Repair Permissions" button.
    Shut down and reboot normally.
    If repairing permissions does not work, you'll have to try and install the combo update. But before we go through that run the steps I suggested above. I would suggest however to download the 10.6.8 combo update to a usb stick in case we have to reinstall it.
    Good Luck!

  • Why won't my iPhone work after latest iTunes update on Windows XP?

    Not the most technically savy guy. Tried to sync my iPhone on my computer like I have plenty of other times before, but got a warning message saying that the hardware that I was attempting to install has not been verified through Windows XP (or something to that effect). Now, my iPhone will not work. The screen only shows the USB icon and iTunes icon with arrow in between signaling to connect to iTunes.... it is already connected to my computer!

    I have a trick to resolve this problem ; uninstall all programs which make up itune such as iTunes,Apple Application Support ,Apple Mobile Device Support ,Apple Software Update and Bonjour. After uninstalling those programs,download and reinstall the current version iTunes. It can help you to sync your iphone with iTune.

Maybe you are looking for