Why won't my macbook pro recognize my wireless printer lexmark x4650?

My macbook pro will not recognize my lexmark x4650  printer to use wirelessly.  I recently had to change router and modem through comcast and have not been able to print wirelessly since.  I can print using a usb and the pc in our house is able to print wirelessly. I installed updates for apple, lexmark, uninstalled and reinstalled printer, tried adding printer manually using directions I found on forum discussions.  Any other suggestions?

I had almost the same thing happen the other day - kept getting a message that my printer was not connected. I went to the printer setup on the printer's panel and the IP address was correct, everything looked as if it should be working. So I just reset my router - figuring that would fix the problem. No go. What I finally ended up doing was resetting my router to factory settings and setting it up anew.
And that's what worked for me.
Clinton

Similar Messages

  • Why won't my Macbook Pro recognize (and connect to) a printer on same WiFi network as my Mac.

    My Macbook Pro was connected and printing to my WiFi network just fine.  However, I started getting an error message saying my printer was not connected.  I checked my printer and it is still connected to wirelss network and the printer test confirmed it was with a strong signal. I have turned off and restarted both the printer and Macbook but I am still getting the same error and it will not print. I decided to delete the printer and add it back, however, when I tried to add it my Macbook didn't list this device or my label maker that is also connected to the network.  It is as though my Mac is not recognizing any devices on the network.  Could I have a setting wrong on my Macbook?  My notebook is connected to the network and it is working.  Both my printing devices show they are connected to the same network.  Help!  I would appreciate any suggestions !

    I had almost the same thing happen the other day - kept getting a message that my printer was not connected. I went to the printer setup on the printer's panel and the IP address was correct, everything looked as if it should be working. So I just reset my router - figuring that would fix the problem. No go. What I finally ended up doing was resetting my router to factory settings and setting it up anew.
    And that's what worked for me.
    Clinton

  • Why doesn't my Macbook Air recognize my wireless printer Canon MX 870

    I have a wireless Printer a Canon MX 870.  Why doesn't my Macbook Air recognize it?

    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • Why won't my Macbook Pro recognize my iPhone 5s?

    SPECS:
    Macbook Pro Retina, Mid 2012 (OS X Version 10.9.1) = up to date
    iTunes (Version 11.1.4) = up to date
    iPhone 5s (Version 7.0.4) = up to date
    My Macbook Pro won't recognize my iPhone when I plug it in.
    The problem is not related to cable issues as the phone charges fine when plugged into the wall.
    I have tried rebooting both my Macbook Pro and iPhone.
    My only guess is something in the latest iTunes update is causing this problem. Help?
    - TheStallion

    I bought a new cable and finally tried it to no avail.
    A few days ago my iPhone 5s lost all functionality (not due to any damage on my part). I took it to an Apple store and they told me that something was wrong internally and gave me a new phone.

  • Why won't my macbook pro recognize my replaced lcd screen?

    I replaces a cracked lcd screen in my unibody macbook pro early 2011. Under About this Mac, Displays, I could still see the old monitor plus the external monitor I was using with thunderbolt port. After changing out to a new lcd, and reassemblying the mac body, the computer did not recognize the new monitor. Why? I only connected the lvds cable to the motherboard and did not completely close the unibody and rehook up the camera and some other cabling which I think is unrelated to the display. I think that with only the lvds cable connected to the new lcd screen, it should light up and show up under displays. No?

    You can try VLC, I belive it supports playback for AVCHD. It I am wrong, it's free, so no harm no foul. You can find it and videolan.org.
    As for iMovie, it should recognize AVCHD, unless your camera has some sort of new or proprietary version of the AVCHD codec, in which case you can only cross your fingers and hope Apple updates iMovie as there is no codec plug-in architecture to expand iMovies native support.

  • Why won't my Macbook Pro recognize a DVD-R?

    Hiya,
    I have a recently-burned DVD-R in perfect condition (no scratches or anything) that my Macbook Pro refuses to recognize.  I put the disk in, and just get an error message saying "The disk you inserted is not readable by this computer".
    Any thoughts?

    Is it really burned? I've had some false burnings, where the media is left blank. Look at it with bright light at an angle: should be evident by a slight change of shine if burnt.
    If yes, does it read in other equipment? The optical system may be dirty; pick up a DVD cleaner disk at the local music or computer store, the dry kind that has tiny bristles on the "business end" that clean the lens.
    Have you tried resetting the PRAM? I sometime had to do that on my previous and now dead '08 MBP.

  • HT204350 Why won't my MacBook Pro recognize the connected USB external drive when trying to 'Transfer Information to this Mac'?

    I recently bought a second-hand MacBook Pro (mid-2010, i7, I'll call this New Mac).  I want to transfer my accounts and data from the first MacBook Pro (mid-2010, i5, I'll call this Old Mac).  I took a Time Machine Backup of the Old Mac, using an external USB drive.  After erasing the drive and installing Maverick on the New Mac, I attached the USB drive to the New Mac and began the setup. 
    At the step "Transfer Information to this Mac", the Mac just gives me a nice spinning icon next to "Looking for source...".  Apparently it cannot find the USB drive.
    How do I fix this?  I don't want to setup a new user on the New Mac, I want to migrate my old users from the Old Mac.

    See if you can inherit the backup.
    Inherit a Backup
    Inherit a Backup (2)
    Another option would be to clone your old Mac and copy the clone. That would leave your old Mac with a backup and you can start a new one with the new Mac.
    Clone  - Carbon Copy Cloner          (Often recommended as it has more features than some others)
    Clone – Data Backup
    Clone – Deja Vu
    Clone  - SuperDuper
    Clone - Synk
    Clone Software – 6 Applications Tested

  • Why doesn't my macbook pro recognize my cannon printer?

    my macbook pro not longer recognizes my canon printer and i am no longer able to print.  I deleted the printer and tried to re install.  I downloaded driver, still no help.  My friend has a macbook pro and once plugged in to her computer, her macbook recognizes it.

    Printers not behaving? Reset them and start from scratch | MacIssues
    Here is the new package of Canon drivers: Apple Canon Printer Drivers 3.2.

  • Why won't my macbook pro recognize my phone's usb cable?

    I have the samsung galaxy sII, my phone is connected so to transfer my music into my mac but I can't find my phone anywhere in my mac, it wont recognize it. Can someone help me or tell me what is the problem??

    I had almost the same thing happen the other day - kept getting a message that my printer was not connected. I went to the printer setup on the printer's panel and the IP address was correct, everything looked as if it should be working. So I just reset my router - figuring that would fix the problem. No go. What I finally ended up doing was resetting my router to factory settings and setting it up anew.
    And that's what worked for me.
    Clinton

  • HT5616 Why won't my MacBook Pro 10.9.2 take my Apple ID to sign into iCloud?

    Why won't my MacBook Pro 10.9.2 take my Apple ID to sign into iCloud?
    I've verified my Apple ID and iCloud is working on my iPad with this same Apple ID.
    THANKS.

    I have the same problem. After updating to 10.9.2
    My ipad and iphone works perfect. It's a certificate problem. Try to reset the keychain http://support.apple.com/kb/HT5813
    Didn't work for me, so I'm calling apple support or maybe reinstall maverick if they can't solved it
    Maybe it works for you :-)

  • Why won't my MACBOOK PRO charge anymore

    Why won't my MACBOOK PRO charge anymore, I am living in China and my 8 month old MACBOOK PRO won't take a charge!! It has now gone flat and I am out of a computer. I bought a new charger but that didn't work. This is ridiculous!!

    Welcome to Apple Support Communities
    To check that the battery is damaged, open System Information or System Profiler (in /Applications/Utilities), choose Power in the sidebar, and copy here "Charge Information" and "Health Information". You can also check your battery status in the battery menu, on the menu bar. If its status is Replace Now or Service Battery, take your MacBook Pro to an Apple Store or reseller to have the battery replaced for free.
    If you don't see any of those messages, do a SMC reset > http://support.apple.com/kb/HT3964

  • Why won't my MacBook Pro connect to my wifi?

    I have a MacBook Pro running OS X 10.8.5.  My ISP is BT Vision so have a open reach fibre modem and a BT HomeHub. All my other wifi devices (iPhone 4S, 5S and Ipad 3) connect to my home network and internet first time every time! However, my MacBook is extremely temperamental.
    When the laptop does connect to the internet it takes a random combination of restarting and turning the wifi on and off. If the laptop is left to connect on its own it either takes an extended period of time (30mins) or it simply won't connect. I have looked through the wifi settings but can't see any reason why the laptop won't connect. The wifi network is visible all he time.
    Any ideas?

    I know how to solve this problem had the same issue, its basically because you BTHome hub runs a 5GHz frequency a long with a 2GHz frequency and for some reason your mac tries to connect to that even though they dont have the techologies will allow them to run on that frequency, making you not connect to the internet. To fix this log into your homehub settings onlin by going to http://bthomehub.home/then going to advanced settings, wireless which should be under it and then click on the 5GHz and turn it off or rename  it and click apply. So you can make your laptop connect to the correct frequency. IF you can connect to the internet on your laptop then you can still do the same steps and process on your phone or any device that connects your BThomehub.

  • Why won't my macbook pro play youtube videos?

    Why wont my macbook pro play youtube videos????
    I bought this over the summer and it's now Nov 28th. I've had it with this thing and nobody is answering my question! Please help!
    I reset safari, emptied my cache, cleared my history, uninstalled and re-installed flash player and nothing has helped. In fact, un/reinstalling flash player worsened the problem. And I cannot update it becuase it says "not recognized".
    I do have avast anti-virus: but I can't fix the warnings in it (after I scan, some warnings popup and it wont let me fix it and I have no idea where to find it in the computer itself). Does this have anything to do with it? I need virus protection, so I dont want to get rid of it.
    I do not have the money to buy firefox (and it's never worked for me ever anyways).
    I know it's not my internet because my dad's pc works great and my sister's mac (for school) loads youtube videos instantly.
    I also have this annoying issue where every page on the interned needs to be reloaded three times before itll load the first time. It sits there for five minutes and does nothing, then I reload the page and BAM its loaded: EXCEPT YOUTUBE.
    For a $1400 machine, I'd like to know what and why this is happening.

    mariposasss wrote:
    Why wont my macbook pro play youtube videos????
    Perhaps there is something wrong with your software and/or a corrupt cache file outside of the browser.
    I reset safari, emptied my cache, cleared my history, uninstalled and re-installed flash player and nothing has helped. In fact, un/reinstalling flash player worsened the problem. And I cannot update it because it says "not recognized".
    Hmm hard to tell what's causing this. May have to do a process of elimination to cure everything on the machine.
    I do have avast anti-virus: but I can't fix the warnings in it (after I scan, some warnings popup and it wont let me fix it and I have no idea where to find it in the computer itself). Does this have anything to do with it? I need virus protection, so I dont want to get rid of it.
    Uninstall the anti-virus, they always cause issues on Mac's.
    You say you need anti-virus, so install the free ClamXav, it's a program you run as you need it, because 99% of the malware out there is for Windows and won't run on a Mac, thus you can just run ClamXav when you need it on where you need it. Won't bugger up the machine.
    I do not have the money to buy firefox (and it's never worked for me ever anyways).
    Firefox is a free web browser by the open source community, it's very powerful and highly customizable with more add-ons, extensions, personas, themes than any other browser. Some things  can be done on Firefox can't be done on any other browser at all. Certainly for someone who is a bit more seasoned to use it fully.
    I know it's not my internet because my dad's pc works great and my sister's mac (for school) loads youtube videos instantly.
    I also have this annoying issue where every page on the interned needs to be reloaded three times before itll load the first time. It sits there for five minutes and does nothing, then I reload the page and BAM its loaded: EXCEPT YOUTUBE.
    For a $1400 machine, I'd like to know what and why this is happening.
    You mentioned your "dad" and you've mentioned a delay loading pages and not YouTube at all.
    Are you by any chance the Administrator of the computer? Can you install Firefox if you wanted too just as a experiment or does it ask for a Admin name and password and you can't provide it?
    "Nannyware" has the ability to block sites and slow down page draws as it's consulting with the nannyware company if that site is suitable to be loaded on your machine.
    If your are the Admin of the machine, then your going to have to methodically go through the fix it list I've generated here to resolve your issue as I cant' tell what's causing your problem specifically behind a screen.
    If it's too much for you, take the machine to a local Mac/PC software repair shop and they can fix you up.
    I suspect by #12 your machine will be fixed.
    Step by Step to fix your Mac

  • Why won't my macbook pro accept both 4gb Ram, It will only use a 4gb and a 2gb?

    I have a mid 2009 2.6 Ghz 15" macbook pro, and recently purchased two samsund ddr3 4gb 1600hz 204 pin RAM. I removed my two 2gb standard Ram from my macbook pro, and inserted the two 4gb Ram. When I turned the computer one it began using its 3 beep sequence as if the Ram fail, so I removed one 4gb Ram and reinserted a 2gb Ram and the computer started. It said I had total 6 gb ram.  I am wonderind why It won't accept both of the 4gb Ram.

    Exactly what Kappy and Stedman1 states.
    The RAM you purchased is way out of specs for what you need.
    Go and return or exchange them for either a set of Crucial, Corsair, Mushkin or Kingston (non value) RAM.

  • Why won't my Macbook Pro charge?

    All of a sudden, my Macbook Pro won't charge. I believe it has something to do with the charger, it no longer charges when my Macbook is off, and rarely when it is on, even! Sometimes it will start charging but only if the computer-connecting end is in a very specific position. Sometimes, not at all. I've tried changing power outlets, and restarting the computer. Also, the aforementioned end has a couple scratches, but doesn't appear to have any serious external damage. I've seen the prices of new chargers, and I'm really hoping to avoid buying a new one. Also, is there anything I could've done to mess up the charger? And how can I make my Macbook charge normally again? Please help!

    try unplugging the adapter from the wall and mac for 1 minute, then plug it back in and see what happens.  you can also try resetting the SMC.If you live near an Apple store, it can't hurt to bring the mac to and the charger to get it diagnosed.  Alternativley, you can purchase a refurbished charger.

Maybe you are looking for

  • Application ssl with balance leastconn

    Messrs, I'd like your help. I did the a cfg in CSS11501 where that have to load balance two server with SSL connections and was chosen the balance leastconn, but always one server has a great number of connections than another and the source IP addre

  • Exporting playlists

    I have an older Mac G4 running OS 10.4.11 and iTunes version 9.2.1 (5) and was wondering how do I export my playlists so I can import them into a new Mac with the new iTunes? What format do I use? My iTunes library is one an external hard drive, yet

  • Phone and macbook pro synch problems

    When I synch my iphone with macbook pro, it duplicates the entries on the iphone calender.  I cannot edit some of the entries on iphone either. 

  • WAP 2.0 support on 8700

    I have an old 8700 from Vodafone in the UK that does not have a service book entry for WAP 2.0.  Can anyone tell me if the 8700 supports WAP 2.0, and in particular if a US AT&T 8700 would have a WAP 2.0 service book entry?

  • Droid 2 Calendar limitations

    Hello... I recently bought the Droid 2 and love it in most ways. I am disappointed, though, in its calendar. For business purposes it is very limited. I need more options for repetition of appointments.  For instance, every 2, 3 or 4 weeks, for appoi