Why won't my mpegs play in Premiere after installing Encore?

When it came time to burn a DVD of my feature length project I found Encore was not installed. I used my CD disks to install and when I reopened Premiere again my .mov files (added after capturing the HDV footage) play fine but the mpeg files from the hdv camera are offline. They will not link. I cannot import nor can I render them in the sequences. I can find video renders that play without audio but I cannot find the audio renders. My captured clips are on the drive and play fine in Windows media player and bridge. These are my project settings:
(they worked perfectly before the Encore install)
For editing with IEEE1394 (FireWire/i.LINK) HDV equipment.
16:9 interlaced HD video at 29.97 frames per second.
48kHz audio.
Drop-Frame Timecode numbering.
General
Editing mode: HDV 1080i
Timebase: 29.97fps
Video Settings
Frame size: 1440h 1080v (1.3333)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
Fields: Upper Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Last note: my video preview settings are on I frame only mpeg. When I first opened one sequence it was on avi and I changed it somehow. Still all sequences are no I frame and there is no way to change them.

I had seen that page thanks. I think my sequence presets may be off but my sequences actually work. Project is mixed between mpeg clips from tape and mov tapes from DSLR Canon T2i. The Mov clips all play on the timeline as well as the titles and other music that I imported.
The only issue is with the mpeg clips which did not import into a new project I created. I am wondering if there is a way (if it's the right solution) to reinstall the correct codec for mpegs into Premiere. The clips play in Bridge, Windows Media Player and Media Player Classic perfectly so they are not corrupt.

Similar Messages

Why won't iTunes 10.6.3 work after installing Mountain Lion?

Why won't iTunes 10.6.3 work after installing Mountain Lion?

Instead of downloading from Apple updates on my computer, I went to apple.com, loaded it from there and the update worked fine.

Why won't my iphone 4s update apps after installing 1.6?

Why won't my iphone 4s update after installing 1.6?

Are you on wifi or 3G ? If 3G try wifi as I received this message earlier that might suggest there is a problem with apple... Again

Why won't my plug-in's work after installing Firefox 4?

After installing Firefox 4 I have had problems. The Aniweather doesn't work and the other plug in don't seem to be working either. They all say they are enabled. I have reinstalled Firefox and it still doesn't work. I would go back to the old Firefox if I could find it.''Roboform Toolbar won't show when I click on the icon in the upper left corner.

Click one of the other tabs at the left on the about:addons page if the "Get Add-ons" tab isn't working or takes too long.

Why won't Windows XP automatic updates work after installing new ITunes

After installing the new 11.1 Itunes, Windows automatic updates fail to install any new updates.
The last time this happened was when I last updated Itunes. I can't remember how I fixed it but I had to go into the apple software and fix something.
Please help!

Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??

Why won't my Photoshop CS2 still open after installing CS4?

Hi,
I've just installed CS4 Design standard on my PC - alongside my existing CS2 installation, because I didn't want to uninstall CS2 until I'd spent time getting used to CS4.
However, when I try to open images with Photoshop CS2, it's almost impossible to do so - CS4 Photoshop opens up instead. If I try to open an image using Bridge CS2, the only option is to open it with PS-CS4. Alternatively, if I right-click on the image in Windows Explorer and select 'Open with', my only option is PS-CS4 (Even if I select Browse at this point and navigate to the PS-CS2 exe, it still insists on opening PS-CS4.)
The only way I can successfully open images in PS-CS2 is to open the application first, using the shortcut in the Start menu or Quick Launch, and then I have to use File>Open to open the image.
Interestingly, I have no problems with InDesign - yes, ID-CS4 is the default if I double-click an ID file, but I can choose to use ID-CS2 by right clicking and selecting 'Open with'. Same goes for Illustrator.
Has anyone else had this problem with Photoshop CS2 and been able to work around it?
Thanks,
Steven

Click one of the other tabs at the left on the about:addons page if the "Get Add-ons" tab isn't working or takes too long.

Why won't Quicktime 7.2 work even after installing plug-ins?

After initially installing Quicktime 7.2, a faint question mark would appear instead of internet videos which required quicktime. I installed one kind of plug-in, but this only fixed it for a little while. Then I installed a bunch of other plug-ins hoping that this would fix it but it only fixed it for a while as before. How do I resolve this problem? I have a mac and mac osx 10.4.10 and use Firefox for internet browsing. And, how do I even tell where my plug-ins are? Thanks!

Apple Discussions!
Make sure you have the latest versions of Adobe Flash Player Software
QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
Deactivate the "Flash Media" option.
This tells the browser not to to display Flash Media and lets the newly installed Adobe software work its magic.
"And, how do I even tell where my plug-ins are?"
If you actually know the names of the plug-ins, you can use Spotlight to locate or you can manually check the following folders:
HD>Library>Internet Plug-Ins
Home>Library>Internet Plug-Ins
HD>Library>QuickTime

Why won't apple tv play some youtube videos it used to play?

Why won't apple tv play some youtube videos it used to play?

Ah I see what you mean. Do these specs help:
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 525 MiB
Duration : 20mn 59s
Overall bit rate : 3 494 Kbps
Encoded date : UTC 2009-08-19 08:38:05
Tagged date : UTC 2009-08-19 08:38:35
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 20mn 59s
Bit rate mode : Variable
Bit rate : 3 333 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16/9
Frame rate mode : Variable
Frame rate : 23.976 fps
Minimum frame rate : 23.810 fps
Maximum frame rate : 24.390 fps
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.151
Stream size : 501 MiB (95%)
Writing library : x264 core 66 r1114 a933a3e
Encoding settings : cabac=1 / ref=5 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=umh / subme=7 / psy_rd=1.0:0.0 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chromaqpoffset=-2 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=2pass / bitrate=3333 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.10
Language : English
Encoded date : UTC 2009-08-19 08:38:03
Tagged date : UTC 2009-08-19 08:38:35
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : 40
Duration : 20mn 59s
Bit rate mode : Constant
Bit rate : 156 Kbps
Nominal bit rate : 160 Kbps
Channel(s) : 2 channels
Channel positions : L R
Sampling rate : 48.0 KHz
Resolution : 16 bits
Stream size : 23.4 MiB (4%)

Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content.

Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content. This comes up on all of my computers. I reset the Apple TV to Factory Settings and still get the same message.

Hi There,
I had the same problem took me several hours to try and sort it out but nothing worked.
I then went to the following apple link
http://support.apple.com/kb/TS5376
Follow everything to a T and you will get the use of your Itunes again.
Hope this helps. Good luck (And remember to breath lol )

Why won't FireFox 4 play mp3 files that have been created since the FF update? It will play mp3 files created prior to the FF update. All of the mp3 files have been created in the same manner, as bounces from Logic Pro 9. Thank you.

Why won't FireFox 4 play mp3 files that have been created since the FF update? It will play mp3 files created prior to the FF update. All of the mp3 files have been created in the same manner, as bounces from Logic Pro 9. Thank you.

Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]]

Why won't my music play on my iPhone 4s?

why won't my music play on my iPhone 4s? it was playing thru the music app but now it's not playing. It show the song but doesn't do anything.

I had this issue when I first upgraded my Iphone4 to ios5. All my music appeared on my device as they always have but they would not play. I searched around online and it appears there was mention of unchecking the "sync music" check box in itunes under the music tab (when device is connected) and syncing your device. I then unchecked all my playlists and synced again then started adding back my music from scratch. After that headache - everything seemed to be back to normal and my music was working once again.

Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

Why won't this song play even after I authorized the computer? It says that I need to authorize the computer, then I enter my username and password and it says the computer is already authorized. But then the song still won't play. What do I do?

Use the Apple ID support -> http://www.apple.com/support/appleid/ - click through the contact information and select the iTunes, etc., hot button. You can have Apple call you or email them.
Clinton

On Mac, why won't the downloaded PDF form SUBMIT after being filled out?

On Mac, why won't the downloaded PDF form SUBMIT after being filled out?
Thank you for the help.
Kind regards
Ryan Kohler

Hi;
This FAQ should describe the issue - you need to be using Adobe Reader (free) or Adobe Acrobat to fill out the PDF, Preview on the Mac breaks the PDF so it is no longer usable: http://forums.adobe.com/docs/DOC-2653
Thanks,
Josh

Why won't my line spacing change even after I change the # in the leading panel

why won't my line spacing change even after I change the # in the leading pane

Is this for text you've already typed? Did you select it first? If that's not it, for PSE 11 and 12 go to the far right of the tool options, click the four-lined square and choose Reset Tool. For PSE 10 and earlier go to the far left options bar, click the tiny triangle (or the tool icon for really old versions) and choose Reset Tool.

Why won't my Time capsule power on after shutting itself down?

Why won't my Time capsule power on after shutting itself down?

Suggest that you unplug the Time Capsule from the power cord and let it rest for 15-20 minutes. Verify that the AC wall socket has power by testing another device like a lamp there.
Try to power the Time Capsule back up.
If it will not power up, unfortunately there has likely been a failure in the power supply section of the Time Capsule.
You will need to take the Time Capsule to an Apple store....if you have one near you....or contact Apple Support directly to go over your options.
http://www.apple.com/support/contact/

Why won't my mpegs play in Premiere after installing Encore?

Similar Messages

Maybe you are looking for