Why won't my new Airport Extreme recognize my USB Hard drive? My MacBook recognizes it. I already have had a great deal of trouble connecting my printer to print wirelessly, but finally resolved that. Now I want to add the external drive with a USB por

Why won't my new Airport Extreme recognize my USB external hard drive. I put a USB port on the base station, and the system recognizes my printer. When I click on disks - it lists my printer, and when I click on Printers it lists my printer. What do I need to do to get it to recognize the external drive? BTW, the MacBook recognizes it, no problem. I have erased it and reformatted it. I am running the new Lion OS. Any help is appreciated.

Yes, I saw a post on one of these threads about a powered USB hub so I ran over to Office Depot and picked one up. I was finally able to see the HD in the Airport Utility. Yay!

Similar Messages

WHy won't my new Airport Extreme connect to the Internet?

I can connect no problem using direct LAN cable, but when I try setting up the AirPort, it doesn't work. Green light is on and everything, just fails to connect to the Internet. Very frustrating. My ethernet uses PPPoE, so I tried setting that up in the AirPort, but it won't work then either......Network Diagnostics keeps getting me to the "Internet failed" stage if I try using DHCP, or only to "Network Settings failed" if I try using PPPoE (even though my direct LAN cable works fine on the same settings! Grrrrrr!) Any help would be greatly appreciated!

Hi Stress Test:
Thanks very much for the reply. I've actually sorted out the problem since posting - just a few minutes ago. I reset the AirPort and reconfigured everything in manual mode with the ethernet cord from my computer connected to the AirPort. I then disconnected the ethernet cord, rebooted the modem and AirPort, did a bit more troubleshooting and suddenly I was connected to the Internet! Still not sure exactly what I did that fixed the problem, but everything is working ok now.
Regards,
John

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

I have a TC for my backups but now I want to add an external hard drive

I have a TC for my backups but now I want to add an external hard drive to my TC and share what is on it within my own network. I can see the hard drive from airport Configurator but I cant acces it. What should i do?

Hard drive getting full or near full?
Here are some of my tips for deleting or archiving data off of your internal hard drive.
Do a search for and downlaod and install OmniDisk Sweeper and OnyX.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive older emails you want to save to disc, Flash drive/s or to ext. hard drive.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, Flash drive or ext. hard drive and/or delete any old documents you no longer use or immediately need.
Uninstall apps that you no longer use. If the app has a dedicated uninstaller, use it to completely uninstall the app. If the app has no uninstaller, then just drag it to the OS X Trash icon and empty the Trash.
Also, if you save old downloaded .dmg application installer files, you can either archive and delete these or just delete the ones you think you'll never install, again.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its thing initially, then go to the cleaning and maintenance tabs and run all of the processes in the tabs. Let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
If you have any other large folders of personal data or projects, these should be thinned out, moved, also, to the external hard drive and then either archived to disc, Flash drive or ext. hard drive and/or deleted off your internal hard drive.
Good Luck!

Is it possible to use Boot Camp to partition an external hard drive so there is a OSX partition and a Windows partiton? I want to use the external drive for backup only, NOT to load Windows and NOT to use as a boot drive.

I have partitioned the internal hard drive and am running Lion and Win7 Pro on my iMac i5 2.7GHz with 16GB RAM. Can I use Boot Camp to create a Windows partition on an OSX external hard drive to use for backing up both systems to the same HDD? I do NOT want to install OSX Lion or Windows 7 Professional on the external drive. I do NOT want to boot either system from the external drive. The 3TB external drive is for backup only.

Use NTFS for Windows and buy Paragon NTFS for OS X
You can also try Paragon HFS for Windows
As long as you are using for data and backups, you can leave the drive as GPT too.
I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
And yes you can use Windows to create a partition.
Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
MBR has trouble with 3TB drives.

I want to add the Flash driver to my Macbook Air

Hello,
I am using a Macbook Air with 128 GB flash driver.
In the Apple store, can they install additional flash driver to my computer ?
otherwise, is there any other method to buy or install additional flash driver ?
Thanks.

Apple will not upgrade computers. You can buy after market solid state drives - see OWC for example. The upgrade is relatively simple and OWC has training videos showing how to do it as well as tool kits with the tools you'll need. While Apple won't install it for you, many 3rd party repair sites will.

Unable to connect new airport extreme to iMAC or MacBook Pro

This must have been covered but I am unable to find a thread addressing my problem. I have just purchased a new Airport Extreme Base Station (AEBS). I updated all of my software and have tried to configure the AEBS for both my laptop and iMAC. I connect to the internet (IN) using a cable modem (Motorola SB 5101). Using the ethernet cable I can connect to the IN with both computers. I have configured the AEBS and the "light" comes up green.
Using the "diagnostics" program associated with Safari on my laptop (OS 10.5.6), all but the last 2 lights come up green. I do not know how to overcome this problem.
On the iMAC (OS 10.4.11) I get the message "Airport not configured". When I go to the Airport Utility App and scan, it tells me that a wireless device is not detected, even though the unit is adjacent to the computer. It does have an early wireless card (0x14E4,0x89) Firmware (Broadcom BCM43xx 1.0).
I hope there are better directions somewhere than what came with the unit.
Thanks in advance for any help.

Bob Timmons, thanks for the response... I will respond to your questions..
1) Yes, I can connect to the internet by attaching the single ethernet type cable from the modem to each computer in-turn.
2) Yes, when I connect the ethernet cable from the modem to the airport base station, I get a green light. (circle icon)
3) I do not (as yet) have a spare ethernet cable to try the connection from the AEBS to either computer.
Making these connections work is a little like magic to me. I have an airport express at work that I successfully connected, but when it happened I was not sure what I did.
I get a little confused because there is the Airport programming software, the Diagnostics software that pops up from Safari, and Network software in Preferences. I am not sure which one is the main one to use.
In addition, I try to Connect, wirelessly in several places. Sometimes in an airport where an "automatic" IP address seems to be assigned and sometimes at work where we use static IP addresses.
I need a map...;o)

I recently purchased a new iMac with an external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. Comments? Help?

I recently purchased a new iMac with an 1 Terrabyte external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. I have not downloaded the external drive's software onto my old Mac because of this concern. May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure? Comments? Help?

If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.

After we installed a new airport extreme, the imac running snow leopard displays black box msgs saying to hold down the power button and or the reset button and then restart your computer. Can anyone provide info that can help resolve this issue?

Experiencing similar issues on both imac and power book: after replacing an original airport extreme with a new airport extreme both computers display a black box msgs that reads: "...turn off your computer by holding down the power button and or the reset button for a few seconds and then restart your computer."...
one of the printers are usb'd to the imac. The printer is not "seeing" the imac nor will it print wireless from the powerbook which was the norm prior to the upgrade on the airport extreme.
Upon restart, the imac does not "see" the wireless keyboard or the mouse until it is "found" again.
At this time the imac or the powerbook can get on line.

It sounds like your computer is getting Kernel Panics. Please look at About "You need to restart your computer" (kernel panic) messages and if the message seen on your display is like the one in the link then you have confirmed you had a KP. KP's can be tough to track down because they can be caused by software or hardware. The first place to start is to post the complete crash log so we can look at it, often there are clues in the log. You can find it at:
/Library/Logs/DiagnosticReports

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How do I add more ports to my new Airport Extreme?

How do I add more ports to my new Airport Extreme? What do I need to buy?

Thinking to leave as is for now- one 2013 extreme.
That would certainly keep things a lot simpler.
Does it seem right that using speed test I'm getting similar speeds, no matter if I'm connected via wi-fi, or Ethernet?
A very good sign assuming those speeds are reasonably close to the your plan offered by your ISP. The Extreme itself is capable of much faster speeds than your ISP can ever hope to provide.
I'm thinking that all the speed in the world is not going to change Time Warner Cable, the provider for earthlink cable
Not sure what you mean here. Time Warner provides various plans, some up to 50 Mbps. I get 60+ consistently with this plan. I had a 30 Mpbs plan before that consistently delivered about 35-36 Mbps.
The math is simple. If you download a lot of files from the Internet, a 50 Mbps connection is going to take half as long to download a file as a 25 Mbps connection, for example.
One word of caution though....if you try a higher speed plan...plan to stay, as you will never go back to slower speeds once you have sampled higher speeds. Comcast now owns Time Warner by the way. I don't know whether that will be a good thing or a bad thing.

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

Can I add a WiFi printer through WPS with the new AirPort Extreme and AirPort Utility 6.3?

It says here that AirPort Utility 6.2 supports WPS-capable WiFi printers, but on the new AirPort Extreme techs pecs Apple insists that the way printing is shared is by connecting the printer to the AirPort Extreme with a USB cable, which really defeats the whole purpose of WiFi printing doesn't it?
Does the new Airport Extreme support WPS-capable printing? Does AirPort Utility 6.3 support it?

Does the new Airport Extreme support WPS-capable printing?
Yes
Does AirPort Utility 6.3 support it?
Yes

I have a RCA media streamer that will not connect to my network with a new airport extreme.

I have a RCA media streamer (Model # DSB872WR) that will not connect to my network with a new airport extreme.I had to create a new network and my computers are connected but media streamer will not. Can anyone help? Thank you

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

HT5654 I have a new computer, Windows 8. My old laptop died and I used to Sync my iPad and iPhone on that device. Now I want to update, the new computer states that I do not have permission. How do i change permissions to this new computer?

I have a new computer, Windows 8. My old laptop died and I used to Sync my iPad and iPhone on that device. Now I want to update, the new desktop computer states that I do not have permission. How do I change permissions to this new computer?

Did you authorize it?

Why won't my new Airport Extreme recognize my USB Hard drive? My MacBook recognizes it. I already have had a great deal of trouble connecting my printer to print wirelessly, but finally resolved that. Now I want to add the external drive with a USB por

Similar Messages

Maybe you are looking for