Why won't my nonifacation scroll down?

When I try to scroll my ninifacation center down, it won't let me. And I have the same problem when I want to use my flashlight, it won't let me scroll up to see my flashlight. Help!

Hi 3unice,
Welcome to Apple Support Communities.
It sounds like there is an issue swiping down on your iPhone to see Notification Center. If the issue occurs when the iPhone is on the locked screen, make sure it's enabled as shown in the first article linked below.
iOS: Understanding Control Center
http://support.apple.com/kb/HT5858
You can enable and disable access to Control Center from the Lock screen or apps in Settings > Control Center.
If that isn't the issue, try restarting or restoring the iPhone.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
I hope this helps.
-Jason

Similar Messages

I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

I want to sign the SECOND page of a pdf document and this system won't let me scroll down past the first page!

Having the same issue, can someone please enlighten us?

MY Iphone4s is frozen up and won't let me scroll down and is reading me off everything i touch and making me double click to get anything to work. Help!

Help!
My iphone4s is frozen up and won't let me scroll down to the accessibilty tab or anything and is reading me off everything that it is doing. I also have to double everything to get it to work (scrolling with a finger can't happen right now). Any advice would be appreciated!

try the re-boot hold on/off button while holding the home button and wait for the apple to appear then let go of both buttons

The "This connection is untrusted" screen pos up, and and when I press "I understand" no "add exception button appears. I think that the button's underneath some text; but firefox won't let me scroll down.

It displays the following after I click "I understand the Risks":
"If you understand what's going on, you
can tell Firefox to start trusting this site's identification.
Even if you trust the site, this error could mean that someone is
tampering" But it doesn't show me the "with your connection." part and the "add exception button, and it won't let me scroll down.

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Why am I unable to scroll down in Adobe InDesign when my page - and objects - are obviously below what I can see?

Hello,
My InDesign CS6 has been doing this ever since I uninstalled and reinstalled on new machine. At first it wasn't that bad and thought I would live with it and just hit Ctrl+0 and get the page to fit window. But scrolling up and down in the program should be something I can always do and I need to get to the bottom of this.
Details: I am someone who uses a combination of the alt key and my mouse scroll wheel to zoom in and out of a document quickly. Well, when I do this from far away (say... 25% zoom) and go to zoom in InDesign moves my layout page randomly down so the bottom half of my page is below the Indesign viewing Window and the top half of my page is above. It's very clear that there is a "snap" that takes my page there. The most annoying part is that even though half of my layout page is off the bottom of the program viewing window, as you can see from the screen shot, there is no option to vertically scroll to center my page in viewing window (using mouse wheel - or vertical bar within program).
I know this is a small issue - But i never had it with my CS6 on my old machine. Is there a setting I do not know about? Like with Guides or something?
Any help would be appreciated. Thanks,

I see some anomalies in scrolling on my Win7 machine with a Logitech mouse, though nothing quite as bad as what you describe. Make sure you have the newest driver (or if you already do, try going back a version), and you can try trashing the ID prefs (see Replace Your Preferences ) though I don't really think that's the issue.

Why won't my Mac shut down?

I've got a Quicksilver G4, 867MHz, 1.25GB RAM, Tiger 10.4.11 at home that just won't shut down. My wife and I share this computer; she has her log in, I have mine. The problem started over a month ago. At that time the G4 had a very difficult time starting - the gray screen, Apple logo and spinning wheel would stay on the screen for up to 4 minutes, then the computer would shut itself off. Three tries and it would finally start up. I ran utilities from the OS disk, ran Tech Tool Pro, ran Disk Warrior, ran Onyx; I did everything I could to clean up the system. It sort of worked - the machine would at least start (although slowly), run (slowly) and shut down normally (occasionally). I decided to reload the operating system along with all the updates. For the first few days after reloading the OS it started, ran and shut down normally. It now starts normally, runs OK, but will not shut down. When prompted to shut down everything on the desktop disappears except the wallpaper. The machine just sits with the wallpaper on the screen for as long as we let it go without forcing a shut down with the power key. What's the solution?
Thanks in advance to all who can help me.
Jon

Hi-
Startup and login items that are corrupt or incompatible can cause both starting and shut down problems.
Troubleshoot following the steps in this article:
http://www.thexlab.com/faqs/startupitems.html

Why won't my G5 shut down after upgrading to OS 10.4?

Hey guys. I have a problem with upgrading my OS to 10.4.
I am running a Late 2004 Dual 2 GHz PowerPC G5 with two internal drives. About a month ago, I upgraded the OS to 10.4.3. It was great having spotlight, but the comptuer would refuse to shut itself down. Instead, it closes all the apps and windows, and gives me a spinning ball. After about 10 minutes, the hard-drives stop clicking, after which the fans kick on and stay on full blast until I manually unplug the comptuer. I have upgraded to 10.4.6, reset PRAM, reset SMU (PMU?), verified and repaired...
In thinking that this was a problem with the OS on the previous system, I installed 10.4.3 (my install disc) onto my second drive, which was happily running 10.3 (this was my backup). If running on this other drive, with 10.4.3, it also fails to shut down! I have done the same suite of resets and upgrades to 10.4.6, but it still doesn't shut down. Is there an incompatibility between my G5 and 10.4? Any advice about what I can do? Help!

Contributed by Fumiaki Kawashima a Level 4 here;
There are many reasons to become unable shutting down or restarting from Apple Menu. Some were explained by other posters.
Most importantly, loginwindow (the parent process is launchd.) close out the user session, continue to set the device permissions and user preferences to their defaults in a restart action, or the process power off the system in a shutdown action. However, the issue proves that somewhere in those routines cannot be performed.
Users authentication system seems to be intact because you can restart or shutdown from the login window. However, the admin account authenticated by the Tiger security systems could confuse somehow and affect loginwindow process for setting up the user environment. This may result in interfering with the process for the shutdown and restart mentioned above.
Test if you can shutdown from the keyboard-- Holding down controloptioncommand keys, and then press the eject key.
Check if the loginwindow plists are corrupted. To do this test, remove the followings to temporary folders on the desktop, and shutdown from the keyboard shortcut combination. Restart the computer to test the recurrence.
/Library/Preferences/com.apple.loginwindow.plist
/Users/HOME/Library/Preferences/com.apple.loginwindow.plist
Try disabling Login Items for third-party applications via the Accounts system preference, if any.
Verify whether any third-party kernel extensions (including device drivers) interfere with the loginwindow hooks process-- Start up with a Safe-mode, then test the Restart from Apple Menu to see whether it works. Also, boot into a Single-user mode, and test if "reboot" command is available from the BSD layer. The I/O Kit API for software developers provides a shutdown hook so that ".kext" troubleshooting may need to be considered. Besides, some bad programmed extension may not be unloaded automatically at a shutdown or restart.
If the computer is configured with Irish language Input method and/or third-party Irish keyboard, try disabling them to test.
A third-party application or custom script may interfere with the loginwindow hooks for the Shut Down or Restart. For example, if you install an application that prevents casually powering down a system, the Shut Down and Restart buttons may not work. Also, if you install a P2P file sharing application, try uninstalling it.
As last resorts, troubleshoot a bad RAM and consider "Erase and Install" solution.
OPTION:
Post a part of system.log that indicates events from "localhost kernel[0]: standard timeslicing quantum is 10000 us" to the next same line.
This may help to narrow down because restarting or shutting down the system process can initiate the procedure programmatically by sending an appropriate Apple event to Mac OS X Tiger's system process (loginwindow).
Likewise, check console.log whether any failures is reported.
Corrections:
Most importantly, the loginwindow (the parent process is launchd.) close out the user session, continue to set the device permissions and user preferences to their defaults in a restart action, or the process power off the system in a shutdown action.
However, the admin account authenticated by the Tiger security systems could confuse somehow and it may impact on the loginwindow process for setting up the user environment. This may result in interfering with the process for the shutdown and restart as mentioned above.
Addendum:
If you post a copy of system.log, consider to edit the Ethernet interface ID to a fake value.
API = Application Programming Interface
Cheers!
DALE

Why won't my computer shut down

My computer will not shut down. Most the times it says that it is because applications are failing to quit. Yes, I have tried to force quit multiple ways, such as Command+option+esc. I have also held down the mouse if on the dock, but the force quit option has not been present during those efforts. Applications that have been unresponsive so far: iTunes, The Sims 3, Safari, Word, Preview. I tried deleting applications, but failed because they need to be quit before that is possible. This also goes for installing updates. Thank you for your help.

hold option and right click the app you're trying to close and then you will see force quit. you can also force quit in Activity monitor

Why won't my presets drop down?

Everything was working fine on Lightroom4, however now when i click on presets, the options will not drop down and thus i can't use them! help!

To address your "stuck triangles":
it could be due to a corrupted preferences file.
So rename it, so that LR will not recognize it and will create a new automatically when restarting.
Close LR and rename
if you have Windows Vista or 7: C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ Lightroom \ Preferences \ Lightroom 4 Preferences.agprefs
if you have a Mac: Macintosh HD / Users / [your username] / Library / Preferences / com.adobe.Lightroom4.plist
The advantage of renaming is that you can come back to the original file in case it would not have solved the problem.
Then, of course you need to trash the newly created file.
Whenever you touch this file, LR must be closed before.
Cornelia

Why won't my K9NGM shut down automatically?

Ever since I installed this mobo it has never turned itself off (as every other board does) I have to manually turn it off when presented with the windoze ok to turn it all off now message...
I've tried searching to find out why but never found anything so now I'm in 'The Land of the Knowledgable' can anyone enlighten me? Am I doing/not doing something stupid?

Quote from: DavidND on 11-April-08, 05:14:40
Fred - no i didn't. I haven't yet upgraded.
Boss - I tried that but am not given ACPI as a choice! where do I find it please? Sorry to be a pain!
"Boss - I tried that but am not given ACPI as a choice! where do I find it please? Sorry to be a pain!"
If its not listed you can't.. You should perform a new fresh installation, or force it by that way:
1. Changing HAL require changes in corespond kernels too. Each HAL use different kernels.
2. The HAL file along with corespond kernels need to match with exact XP version installed. Example:
If the user is using SP2(most popular and recent), we must use HAL & kernels version for SP2 too.(else will not gonna work)
So let's comment here again:
"expand d:\i386\halmacpi.dl_ c:\windows\system32"
If we use SP2, we need to use correct version of halmacpi.dll (in the string above its older version), we can get it from here:
expand d:\i386\sp2.cab -F:halmacpi.dll c:\windows\system32 /* I assume that we have XP SP2 installation disk */
or we can use other location, which will no need to have XP installation disk, XP is keep a copy of files locally, we can use this one instead too:
expand c:\windows\driver cache\i386\sp2.cab -F:halmacpi.dll c:\windows\system32
If we use SP3, we should use sp3 versions of halmacpi.dll,(and kernels which will be described below) e.g. in the string above we must replace sp2.cab with sp3.cab
OK, think that part should be clear, the next stage updating the kernels for our chosen HAL, ofc. we will follow the rule 1 they to match with our version used.
"ACPI Multiprocessor PC" is using those kernels: ntkrnlmp.exe, ntkrpamp.exe which must be renamed and overwritten to ===> ntoskrnl.exe, ntkrnlpa.exe in %systemroot%\system32 directory.
/* MS$ is using the same names for kernels, but in reality they are different for each HAL... */
So our complete scenario to successfully change(force "ACPI Multiprocessor PC") will look in that way:
expand c:\windows\driver cache\i386\sp2.cab -F:halmacpi.dll c:\windows\system32
expand c:\windows\driver cache\i386\sp2.cab -F:ntkrpamp.exe c:\windows\system32
expand c:\windows\driver cache\i386\sp2.cab -F:ntkrnlmp.exe c:\windows\system32
or better going to c:\windows\driver cache\i386\ folder 1st, to type lesser by:
cd c:\windows\driver cache\i386
and
expand sp2.cab -F:halmacpi.dll c:\windows\system32
expand sp2.cab -F:ntkrpamp.exe c:\windows\system32
expand sp2.cab -F:ntkrnlmp.exe c:\windows\system32
clearing the way for new HAL and kernels and making backup of current one in same time by:
ren ntkrnlpa.exe ntkrnlpa.old
ren ntoskrnl.exe ntoskrnl.old
ren hal.dll hal.old
then naming new HAL file with kernels to expected by OS with:
ren halmacpi.dll hal.dll
ren ntkrpamp.exe ntkrnlpa.exe
ren ntkrnlmp.exe ntoskrnl.exe
reboot PC by:
echo g=FFFF:0000|debug /* or just hit reset key...*/
In short to be more clear what we have changed:
To force "ACPI Multiprocessor PC", we need to overwrite:
extract & rename & replace(overwrite) Halmacpi.dll to ---> %systemroot%\system32\hal.dll
extract & rename & replace(overwrite) ntkrnlmp.exe to --> %systemroot%\system32\ntoskrnl.exe
extract & rename & replace(overwrite) ntkrpamp.exe to --> %systemroot%\system32\ntkrnlpa.exe
Just we must be sure that source files will match with actual XP OS version, etc:
If we use SP2, we must get source files(Halmacpi.dll, ntkrnlmp.exe, ntkrpamp.exe) from %windir%\driver cache\i386\sp2.cab,
If we use SP3 we must get source files from %windir%\driver cache\i386\sp3.cab,
If we use SP1 we must %windir%\driver cache\i386\driver.cab
If we use XP without SP we must get the source files from %windir%\driver cache\i386\ /* they exist there but compressed, which can be done by same way with expand command)
Then just to rename files and replace into %systemroot%\system32 folder as followed:
Halmacpi.dll to ---> %systemroot%\system32\hal.dll
ntkrnlmp.exe to --> %systemroot%\system32\ntoskrnl.exe
ntkrpamp.exe to --> %systemroot%\system32\ntkrnlpa.exe
We can use XP installation disk recovery console, we can use some DOS version which NTFS mounted which have write ability to NTFS, or just second OS installed to replace files from there.
Have used the procedure above xx times working every time without single issue
Else enter in BIOS and "LOAD BIOS OPTIMIZED DEFAULT", followed by "SAVE AND EXIT" then perform a new fresh OS installation

Why won't my iPod shut down ??

hey !!
i have a problem with my nano, i dont know what's happening, but it wont turn off ! i keep pressing the "play" touch like i normally would to shut it off, but it just wont work !! can anyone tell me what to do ?

Finally did that. I didn't realize it took that long so I was just figuring there was a problem and you couldn't shut it down that way. New to Macs, but not to PCs
MacBook 2.0GHz 2 GB ram, Mini Core Duo 1GB ram, and 3 Windows machines Mac OS X (10.4.6)

Why won't my MacBookPro shut down?

My 17" MBP works fine, but 2 nights ago it started to refuse to shut down, and it continues not to shut down and not to restart. It does, however, go to sleep.
I'm concerned, and would like to fix whatever is wrong without bringing it to a Mac store, if possible.
Any suggestions?
Thanks so much for your input!
Dennis

book2: My money is on the printer as the culprit. Make sure you have nothing queued up for printing when you shut down, and also make sure you have the latest Canon driver version for your printer.
There are still some USB devices and drivers that interfere with sleep, and perhaps with shutdown, by sending a very brief "Hello? Are you still there? I'm still here!" signal to the computer at regular intervals, in some extreme cases as often as once every second. A computer that is constantly plagued with such activity on the USB bus may never be able to carry out a Sleep or Shut Down command. Your printer or its driver software may be indulging in this kind of misbehavior, in which case it's no surprise that disconnecting it it before trying to shut down is an effective workaround. (Just turning the printer off might or might not do the same.) A newer driver version, if there is one, may remedy the problem, or it may not.

Why won't Firefox 33 shut down properly?

I must have just got an update to V33 because I was not seeing this problem before today. I have not myself been messing with the configuration in the last couple of weeks. (Not sure when the last time I actually closed Firefox successfully, but it was definitely within the last 3 days.) Looking at Submitted Crash Reports, I see just one on 10/3 and then 53 of them spanning the interval from 7PM to 8PM this evening, during which I had had to kill it from the Task Manager 3 times because it was just hanging when it was supposed to be shutting down. Here is a small sample:
af0c75a7-feaf-4ad3-aae2-81ddeedeaaaf 10/18/2014 8:00 PM
f0309bc5-4bc8-435f-9f33-aa2c6bb3a09d 10/18/2014 8:00 PM
02906c47-fc27-4559-b735-093215ac92b5 10/18/2014 8:00 PM
302fce44-9e80-440c-8f79-241b3a3d8328 10/18/2014 8:00 PM
Firefox seems to be working normally when I restart it.
I really do not want to have to do a reset to fix this. However, if I were to have to, would Sync put things back?
Is reverting to V32 an option? If so, how?
I'd appreciate any help.

Uhh. Never mind. After restarting Windows, it started shutting down normally again.

Why won't My messages scroll?

My messages will not scroll

Try restarting your iPad by holding down the on/off and the home buttons at the same time until you see the Apple logo.

Why won't a rented video down load

I rented 2 videos and only one of them downloaded when I try to see the other film it asks for my Apple ID and then tells me "yourented this video but have not downloaded it yet go to downloads " but I can't find Downloads.

Welcome to the Apple community Triley937.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

Why won't my nonifacation scroll down?

Similar Messages

Maybe you are looking for