Why won't my plug ins work?

After finding that my Nik plug ins were not compatible with Elements 12 I reinstalled Elements 9. However, whilst the filters can be used the resulting image can not be saved. I press the ok button and nothing.

I don't know anything about PSE9 so I can't help you there. However, PSE12 is the latest version and why do you say your plugin doesn't work?
First you need to do is go to:
Help >> Updates
This should update the camera raw plugins for all new cameras since the product was released last September 2013.
Have you done this? If not do it now and post back to tell us what these plugins are that aren't working in PSE9 or are not compatible with PSE12.
Good luck.

Similar Messages

Do Bombfactory Plug-ins work with STP?

Do Bombfactory or Waves plug-ins work with STP? I'm particularly hoping the Bombfactory ones do. Thanks.

Waves plugins work since they're available as AudioUnits. Bombfactory won't work because they're only RTAS.

Why wont these free plug-ins/filter show up in Final Cut Pro X?

Why wont these free plug-ins/filter show up in Final Cut Pro X? Two of them are .fcfcc files from http://pistolerapost.com/pluginz/index.html

Here are many good effects http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates

Why won't my iTunes code work

Why won't my iTunes code work helpppp

Hi Benrad09,
If you are having issues redeeming an iTunes Gift code, you may find the following article helpful:
Apple Support: If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021
Regards,
- Brenden

Why won't Quicktime 7.2 work even after installing plug-ins?

After initially installing Quicktime 7.2, a faint question mark would appear instead of internet videos which required quicktime. I installed one kind of plug-in, but this only fixed it for a little while. Then I installed a bunch of other plug-ins hoping that this would fix it but it only fixed it for a while as before. How do I resolve this problem? I have a mac and mac osx 10.4.10 and use Firefox for internet browsing. And, how do I even tell where my plug-ins are? Thanks!

Apple Discussions!
Make sure you have the latest versions of Adobe Flash Player Software
QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
Deactivate the "Flash Media" option.
This tells the browser not to to display Flash Media and lets the newly installed Adobe software work its magic.
"And, how do I even tell where my plug-ins are?"
If you actually know the names of the plug-ins, you can use Spotlight to locate or you can manually check the following folders:
HD>Library>Internet Plug-Ins
Home>Library>Internet Plug-Ins
HD>Library>QuickTime

TUTORIAL: How to make PPC Plug-Ins work on Intel Macs!

Hi guys, I wanted to share this brillant method with you all, collect ideas and create a list of Plug-Ins, you have succeeded to make work (I guess nearly all PPc Plugs will work this way but lets better stick to facts). Maybe there is a way to work with more than 1 Plug - Feel free to report and contribute! Kudos goes to a dear friend of mine... Let' share some power...
"I noticed some people complaining about not being able to use Trilogy and Atmosphere on Intel Macs. There's a tricky way to do it that takes about ten minutes to set up the first time and after that is easy. It probably works for other PPC-only instruments as well.
Here's the outline: OSX for Intel contains a layer called Rosetta, which runs PPC software that hasn't been updated. (You might run Microsoft Word via Rosetta and not even know it.) In general, Rosetta is no good for audio software: you can't use it for a sequencer or a recording application. But it's good enough for a lightweight plugin host like Rax, which does nothing but serve as a host for Atmosphere. So you can load Atmosphere into Rax via Rosetta, then run it alongside a UB sequencer like Live or Logic.
The only tricky part is connecting the two together. You need to get MIDI out of your sequencer and into Rax, and you need to get audio out of Rax and back into the sequencer. The MIDI can go via an internal IAC bus. The audio can go via the handy freeware audio-routing utility Soundflower.
Here's how to set up:
-- download Rax version 1.2.3. (Version 2 and up won't work.) You can find it at http://macmusic.org/software/view.php?id=395 . Use the serial in SerialBox to install.
-- download and install Soundflower from http://www.cycling74.com/downloads/soundflower
-- in Audio MIDI Setup, create a new IAC bus. Instructions on how to do this are at http://www.spectrasonics.net/news/Creating-an-IAC-Bus.html . Name it Rhino. (You can name it whatever you want, but in these instructions I'm going to call it Rhino.)
Now you're ready to go.
-- Open your sequencer and create a MIDI track and an audio track. Set the MIDI track's output to Rhino. Set the audio track's input to Soundflower 2ch.
-- Open Rax and load Atmosphere. In the Preferences, go to the Audio tab and set Audio Device to Soundflower 2ch. Now go to the MIDI tab and, under MIDI Inputs, make sure Rhino is the only thing checked.
You should now be able to send MIDI from your sequencer to Atmosphere, and then hear the audio through the sequencer. One last stage is to sync Atmosphere to your sequencer's MIDI clock, so that tempo-synched effects will work properly.
-- Still in Rax Preferences, on the MIDI tab, set the MIDI Clock dropdown menu to Rhino. Close the Preferences window. At the top of the main Rax window, make sure the Ext. Sync box is checked. The Tempo window should say 0, which means Rax is following the sequencer's master tempo.
And you're done. Save the Rax document and you can open Atmosphere with a single click. Trilogy works the exact same way, obviously.
If you want to use multiple instruments from Rax, you'll need to use SoundFlower 16ch and send MIDI on a different MIDI channel for each instrument (using the same IAC bus).
Anyone who's tried this, please post your results in this thread. Especially, try out other PPC instruments, and try using multiple instruments at the same time, and let us know how it works for you."
Maybe one of the Admins wants to sticky this
With my very best,
Vic.

There's another shortcut I've used successfully in order to access 'old' PlugIns on an Intel MBP :
Just use Logic 6 - and take full advantage o' that ole rotatin' rosetta
Meaning : Other than with native Logic versions 7 and 8, Logic 6 has to be fully emulated by the rosetta engine, and if your intel mac is fast enough, it does so very well - thus including all PPC PlugIns you still may have installed. Also works fine for PlugIns that were converted via FXpansion's VST-AU manager.

Would my plug-ins work in Logic 7.2 and intel mac?

This may be a dumb question but would my plug-ins that work in Logic 7.1 on my Powerbook work in Logic 7.2 on an intel mac?

The statement I made is not a "blanket" one, if one is looking at the big picture.
I understand why you would consider that a blanket statement, since you are narrowly looking only at one angle.
The user did not state that this is the only reason he is getting a computer, and he did not specify that he is using the computer ONLY for Logic, and therefore, it is wise to consider all options.
In what way was my comment narrow?
Everyone's situation is different depending on what software, plugins and peripherals are used. Making a recommendation based on months makes no sense since someone's software may be ready much sooner than that, or may be available even later.
The decision to upgrade should be based on whether the things you need to run are ready or not. Doing it this way considers all options, picking a number of months out of a hat is narrowly looking at one angle.

Why cant I disable plug ins?

I was using mobile broadband to connect to the Internet. Because it was prepaid and video was what ate up the most MBs I disabled all the plug-ins such as flash player, realplayer etc...that allowed video to run on webpages.
This worked just fine and since I didn't care about video it wasnt a problem and I did it for over a year.
Recently I subscribed to cable broadband so I no longer use the mobile broadband. I enabled all the video plug-ins and I am all set.
The problem lies in the following. I gave the mobile broadband device to my mother to use for her desktop as I did. She has a computer but only uses it to check email etc...in a very limited capacity to where paying for a monthly Internet ISP doesn't make much sense so the prepaid mobile broadband is perfect.
She is running Windows Vista and Firefox version-3.6
The problem is when I go into her firefox to disable the same video plug-ins that I disabled on mine, they do not stay disabled which allows video to play on all sites which burns through her prepaid Internet balance at an insane rate. I am able to disable them however as soon as I restart firefox, they are automatically enabled again. I've tried a dozen times or more and have tried rebooting the computer, etc... and nothing works. They are disabled but as soon as firefox restarts and I check they are once again enabled.
Can you please tell me what is going on and how to fix it? I Feel bad because she specifically got rid of her Internet service because I gave her this to use and now she cant use it because it is costing a fortune.
Thank You

Unchecked 'Enable SMTP', 'Enable IMAP' and 'Enable POP', then checked 'Deliver to /var/mail
That seemed to 'disable the mail service'
As for disk usage, i'm running a cron job every minute so que queue had close to 6k mails it couldn't deliver. deleted them all " sudo postsuper -d ALL " and redirected output on the cron job to /dev/null

Will PSE3 Third Party Plug-Ins Work On My New iMac ?

Over the past 5+ years I have accumulated quite a few third party plug-ins for both PSE2 and PSE3 running on my Apple eMac G4.
I will shortly be taking delivery of a new Intel based iMac,and whilst previous posts on this forum show that I can run PSE3 on the new machine,what about the third party plug-ins ?
I will be installing PSE3 on the iMac using the original discs,and, if I can use them,do I just 'migrate' the plug-ins using the Apple Migration Assistant - or what ?

It depends. Some can be transferred that way, but some require their own installer.
EDIT If you have the installer, use it. If not, you won't be any worse off if you try manually moving them. Incidentally, I'm assuming you're talking about true plug-ins (.plugin files) and not about actions and such, which can be moved, but go to very different places in PSE 6.

Logic pro won't load plug-ins

Hey!
I know that there are several discussions about this, but i think this problem that i've got is quite unique.
I am using Mountain Lion on a Macbook Pro with Logic pro 9.
I was using the following plug-ins:
*Sausage fattener
*Massive
*Sylenth1
*Nexus
The problem here is that yesterday, i shut down my computer, when i woke up and started Logic, it was saying:
Logic pro: Plug-in "Nexus" not available.
Logic pro: Plug-in "Sylenth1" not available.
So i restarted the computer and now it has added:
Logic pro: Plug-in "Sausage fattener" not available.
Massive still works though.
I checked the vst folders and everything, deleted it and reinstalled, restarted my computer but NOTHING works.
Do anyone have a clue what to do? Been googeling all day..
Cheers!

Those are all 32bit plugins...
So start up Logic Pro in 32bit mode and see if that fixes things...
Resolution
To switch Logic between 32- and 64-bit mode:
Quit Logic Pro, if it is running.
Navigate to and select the Logic Pro application in the Applications folder.
Choose File, then Get Info.
Select the "Open in 32-bit mode" checkbox to run Logic Pro in 32-bit mode. Deselect the checkbox to run Logic Pro in 64-bit mode.
My guess is you changed modes..
Note: The 32bit plugins will also show up in 64bit mode under the 32bit plugin area of the drop down menu... (and then they use the 32bit to 64bit bridge program automatically) so you might need to just run LP in 32bit mode and then again in 64bit mode to fully revalidate them again..

Why won't FP 11.4 work on my Mac?

I've downloaded and installed FP 11.4 several times. It is always "successful" and appears in the Internet Plug-Ins file... but I contiue to see the message "Blocked Plug-In" wherever I try to see a Flash Player image.
What am I missing?
Thanks!
Lee
Mac OS10.7.4
Safari 6.0

Chris!
You nailed it!
There was no "Shockwave Flash", but there was:
_Flash Player.plugin (note the underline)
The Info panel for it showed:
Adobe Flash Player 11.2 r202
I deleted it and the current version, so no FP plugin was left. Then, I reinstalled 11.4... and Bingo, it works!!
I have no idea how the underline got into the name... but it camouflaged it enough that I didn't notice it every time I looked at the Plugins. Your sugggestion made me look closer.
Many thanks!!
Lee

1) More clip art? 2) Do plug-ins work in CS55?

1) Is there more clip art or is it the same batch that was in PrE9?
2) Does the 64-bit version have 64 bit plug-ins that will work in PrPro CS55?
cheers,
Petey

Hi Hunt,
I guess I was wondering if the PrE9/10 clip art is actually installed on the hard drive or embedded into a DLL library and one can only see it within the program, then export it.
SORRY.... I JUST FOUND IT ON MY HD..... it's PNG FORMAT.... no problem.
thanks...
cheerio,
Petey

I can not make visualizer plug-ins work in iTunes

I did a search and I did not see anything helpful.
I am using an up-to-date version of iTunes with no other plug-ins installed.
I have followed the instructions on this plug-in:
http://www.dr-lex.34sp.com/software/spectrograph.html (updated 12-06)
I know of other people that have had no problems getting it to work. I have reopened and closed iTunes, rebooted my machine several times, nothing.
If anyone else can point out a spectograph plug-in that might work, help is appreciated.

As an update, the plug-in installed perfectly fine, and it works on my MacBook Pro. So I tried moving the .bundle package from my MacBook Pro to my Mac Pro.
Upon moving it to my Mac Pro, the icon changed from the normal iTunes .bundle icon to a normal folder. It also behaved like a normal folder. Double-clicking opened up the contents. And the plug-in still didn't work.
So the breakdown here:
MacBook Pro - Plug-in works fine.
Mac Pro - When the .bundle was moved from MBP to MP, it turned right into a folder, not a bundle, and all attempts to turn it into a bundle failed.
Any idea what is going on here?

How to make my NIK LR/CS4 plug-ins work on Aperture

I'm new to Aperture and I absolutely love it (so far). I also have Lr and PS CS4, for which I have NIK Color effex and Sharpener Pro plug-ins. I went to NIK website and downloaded their plug-ins for Aperture, but they do not take the products keys that came with my LR/CS4 versions. I cannot believe that I would have to pay twice for using the same Nik software on 2 different apps on the same iMac. Does anyone know what I should do to make these Nik programs also run with Aperture ?
Thanks for help ! Frederic

fredericpaeps wrote:
figure out how to work in 32 bit mode
Frederic,
I found the NIK people as well as the Topaz people to be very responsive and helpful.
Actually, it seems to me that the 32/64-bit thing pretty much takes care of itself.
These are my observations and I do not profess to be an expert.
First- If you have a 64-bit computer Aperture 3 will open in 64-bit WITHOUT any extra effort on your part.
Second- When you wish to use one of the NIK plug-ins you will be told the software needs to close and reopen Aperture in 32-bit mode. Click OK and that happens.
I have yet to see any difference in Aperture whether in 32 or 64 bit mod but if I am not planning to use the plug-ins soon I quit and reopen Aperture just in case there is some benefit to 64-bit I have not yet discovered.
Jerry

Premiere CS 5.5 won't see plug-ins

I've switch over from FCP and I'm having an issue installing a Premiere plug-in.
When I use the installer I get this: "no installations of premiere pro were found".
I looked online to find where the plug-in folder would be and I got two different answers.
Form Adobe I get..
Any effect is available to Premiere Pro when its plug-in file is present in the common Plug-ins folder:
• (Mac OS) /Library/Application Support/Adobe/Common/Plug-ins/<version>/MediaCore
This doesn't work.
And from Digieffects I get:
Copy the entire Digieffects plugin folder and its contents to the "Plug-ins" folder. To access this folder , go to the Adobe Premiere Pro CS3 application icon (located at Macintosh HD/Applications/Adobe Premiere Pro CS3/Adobe Premiere Pro CS3), right click and highlight "Show Package Contents". This will open a folder called "Adobe Premiere Pro CS3". From here you will follow the path Adobe Premiere Pro CS3/Contents/Plug-ins/en_US where you will copy the entire Digieffects plugin folder and its contents to this folder.
This desn't work either.
So any advise would be much appreciated.
Thank you.
Mark

It appears that NewBlue FX do need to be placed into the "Show Package Contents" area of Premiere.
This is their removal process which shows where the plug-ins go.
Mac: Removing effects
By NewBlueFX Team | Posted on: 12:52 pm, Monday, January 11th, 2010 | Filed under: Installations | Tagged as: Mac, Uninstall
After Effects:
Premiere:
1) Locate where Premiere is installed.
2) Find “Adobe Premiere Pro CS4.app” (version number will vary) - right-click it
3) Choose “Show Package Contents” from the menu
4) Navigate to Contents/Plug-ins/Common/NewBlue and delete folder.

Why won't my plug ins work?

Similar Messages

Maybe you are looking for