Why won't my printer recognize my goggle email?
why won't my printer recognize my goggle email? I keep getting no email associated with printer. what do I need to do? I have set up my eprint account with my goggle email.
{Personal Information Removed}
If you see the error message "no email associated with printer" where are you seeing this error (example: on the printer, a print app, at the hpconnected website, etc)?
What model of printer do you have?
--ePrint Support Website--
Answer those questions please so I can be of more assistance.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!
Similar Messages
-
Why won't my printer print with Windows 8?
Why won’t my printer print with Windows 8?
Have you just upgraded, or purchased a new computer with Windows 8, and now you can’t get your printer to work? If so, this may help you. A lot of people have questions about installing their printer on a new OS. This will help you answer those questions and make sure that you get everything installed.
Before You Start
Before you try to install the printer on a Windows 8 computer, you should check to make sure the printer is compatible with the new OS. The link below will give you a list of the printers that will work in Windows 8.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&lc=en&cc=us&destPage=document&dlc=en
If you have upgraded your computer to Windows 8 form another version of Windows, make sure to completely uninstall all of the software for your printer. It should still print, but to use all the functions you will need to reinstall the software, if it’s available.
Another thing to consider is how you want to connect the printer to the computer.
USB. You should make sure that you have a USB cable that is no longer than 6 ft. (roughly 2m). Make sure to connect the printer directly to the computer. Do not use a USB hub.
Ethernet cable. Make sure you have the network setup, that you have a free cable port on the router, and that you have an Ethernet cable available.
Wireless. You should make sure that you have the wireless network setup, and that you have the password for the wireless network.
1. Installing Via USB
Installing via USB in Windows 8 has become much simpler for HP printer users. In other versions of the Windows OS you had to start the installation and wait for it to ask you for the USB connection. If you didn’t, you would have to uninstall the printer from the Printers/Devices folder, and then start the install. In Windows 8, that will not be a problem. If you plug the printer’s USB cable in and then install the printer’s software, it will still work. Now for in depth instructions on installing the printer via USB click the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460670&tmp_task=solveCategory&cc=us&dlc=en&la...
2. Installing Via an Ethernet Network Connection
For an Ethernet network connected printer the install is amazingly simple. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s really that easy.
http://www8.hp.com/us/en/support-drivers.html
3. Installing Via a Wireless Network Connection.
For a wireless network connected printer the install is amazingly simple as well. All you have to do is connect the printer to the network. Once you have that done, Windows 8 will automatically install the drivers for you. Then, all you have to do is install the rest of the software, if it’s available. It’s pretty much the same as an Ethernet install, just wireless.
http://www8.hp.com/us/en/support-drivers.html
Alternate Install Methods
With Windows 8, many printers’ drivers are installed with the OS. These are known as InOS drivers, since they come built into the operating system. If you have one of those printers, all you should have to do is connect it to the computer via USB, or connect it to the network via Ethernet or wireless. Once you have that done Windows will handle the rest. There are alternate methods of installing your printer if the normal methods are not working for some reason. You can install the printer either using the Printer Install Wizard, or through Windows Updates.
Printer Install Wizard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02681060&tmp_task=solveCategory&cc=us&dlc=en&la...
Windows Update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&tmp_task=solveCategory&cc=us&dlc=en&la...
Note: The Laserjet drivers for the Asia-Pacific and Japan won’t be released until a later date. Check the support site linked below for driver availability. I will update this post once they become available.
http://www8.hp.com/us/en/support-drivers.html
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.Hope this answers some questions.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Why won't my MAC recognize a DVD with JPG...HELP!!!
I have received 3 different DVD's from this photographer in an effort for me to be able to view my pictures. None of them work!! She has now given me a cd and it works fine!?!!? Why won't my Mac recognize the DVDs??
A friend of mine turns out a lot of DVD's for and organization that he does photo work for and he has found
that burning DVD + or - can make a diferance along with the age of the player and he has gone back to
burning them at the slowest speed possible. (people in the organization sends him old pictures that he fixes
then burnes a DVD for them and returnes the pictures and DVD.)
lechtmmgg -
Why won't my Mac recognize Verbatim Dual Layer blank DVDs?
Why won't my Mac recognize Verbatim Dual Layer blank DVDs?
I've just completed a 140 minute project in FCP. I've encoded an MPEG2 file that is 5.75GB in size. Brought into DVDSP and am trying to burn the DVD.
I have Final Cut Studio 1, latest updates and everything.
Because of the 5.75GB size I need to burn to Dual Layer DVD. I have Verbatim 4x 8.56GB dual layer DVDs.
When I click buld/burn and pop in a dual layer DVD I get an error saying "please insert compatible disc".
Even with every app closed. If I put one of these DVDs in my Mac it simply spits it out after about 20 seconds.
For some reason the Mac won't handle or understand these Dual Layer DVDs.
I bought this Mac Pro about 4 months ago and it is the 2 x 2.66Ghz Dual Core Intel Xeon machine and the DVD drive (according to system profiler) is a Pioneer DVD-RW DVD-111D. In system profiler it says "Pioneer DVD-RW DVD-111D"
Can anyone tell me if this DVD player is actually capable of dual layer, or do I need to buy one.
In System Profiler under Revision it says: AB09 and under Protocol it says: ATAPI
Can anyone advise please?If you have access to a pc into which you can install the 112, or if you have bootcamp, you can replace the Apple supplied firmware with Pioneer firmware. This should restore full functionality to the drive. The latest Pioneer firmware for the drive is version 1.21 and can be found here: http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1426
mac pro, dual 1.25 g4 - Pioneer 111d, LG H10, Plextor 716UF, LG 4163,Pioneer 112 Mac OS X (10.4.10) dell 9200, dell xps 400 Benq 1650, Plextor Premium -
Why won't my printer (Brother HL2270DW) print out Elements bi-monthly magazine. Screen says either printed not connected (not true) or PDF not supported of shows a blank document. No problems printing on any other website.
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Why won't my printer print page numbers in a document? The page numbers show in print preview, but will not print on document.
Perhaps you have set the margins so tight to the edge of the paper that you have gotten into the non-printing area for your printer. Most printers have a dead zone.
What are your margin settings?
Jerry -
Why won't my IMAC recognize my new smart phone via USB?
Why won't my imac recognize my new smart phone via USB?
Have no clue since you provided no details. What did the smart phone tech support tell you? You contacted them right?
-
HT2801 Why won't Windows 7 recognize the super drive?
Why won't windows 7 recognize the super drive? I have set up and it was working yesterday. I added a usb hup and a HDMI - Vga adapter to run two moniters? When I booted everything up again I found out that windows would not reconize the super drive. When I an running OS X, I have know issues.
You tried everything here:
iOS: Device not recognized in iTunes for Windows
including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
What does diagnostics show?
iTunes for Windows: Gathering and using iTunes Diagnostics -
Why won't my itunes recognize my ipad in devices?
Why won't my itunes recognize my ipad when I plug it in to the computer? I have tried connecting the ipad both before and after opening itunes but it does not show up as an ipad in the upper right portion of the screen as my iphone does. Suggestions?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers, Tom -
Why won't my MacBook recognize the install disk?
Why won't my Macbook recognize the install disk? I want to run the Apple Hardware Test, but the computer will not boot from the install disk, it keeps ejecting the disk.
Several possibilities -
The disk may be from a different model of computer.
The disk itself may be damaged.
The optical drive in your MacBook may have gone bad. Can it read other DVDs? -
Why won't my laptop recognize my iPod nano second generation when I plug it in via USB? It does recognize my ipad mini. I was hoping to transfer music from my iPod to my ipad mini
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. You can use some third party software like this iPod file transfer, it can help you copy files from iPod to computer, and then you can use iTunes to sync the music to your iPad mini.
7. Check for third-party software conflicts. -
Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?
Assuming the MP620 is connected to your wireless network, then there are two components to this device - the printer and the scanner. The printer uses Canon proprietary software while the scanner is supported by Apple's Bonjour service. So in many cases, you will at least see the scanner, shown as Bonjour Scanner in the Kind column, while the printer can take longer to appear and is shown as canonijnetwork in the Kind column. If you cannot see either then you have a network issue. Try turning off the MP620 for a minute and then turning back on. Then see if the scanner / printer component appears in the Add Printer window. If you still don't see either, then confirm the MP and the Mac are using the same network. If you know the MP's IP address you can use Network Utility to Ping the address. You can also enable Bonjour Bookmarks in Safari preferences and when selected, the MP620 should appear.
-
Why won't my imac recognize a wired keyboard to work with a wireless track pad?
why won't my imac recognize a wired keyboard to work with a wireless track pad?
Which model iMac are you using?
-
Why won't my ipad let me play email attached wmv videos?
Why won't my ipad let me play email attached wmv videos?
Windows media files are not natively supported - have you had a look in the app store to see if there are any apps that support WMV files ?
-
Why won't Firefox automatically show new Hotmail emails or easily down load attachments when it was working a week ago?
Hotmail has been having a few hiccups lately I'm afraid.
If you don't see any emails when you log in, or nothing appears after some time, click in the middle of the grey bar on the left which has the word "'''Inbox'''" in it. This usually causes them to magically appear for some strange reason.
I've read on on a few blogs that Microsoft is working on the problem, but don't hold your breath.<br><br>
If this suggestion resolves the problem for you, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same problem.
Thanks.
Maybe you are looking for
-
Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because noth
-
What are "Name$1.class" files and how do I generate them in Eclipse
I have the source code of a rather large java application and I want to set up an Eclipse project for it. After diffing the WEB-INF directory generated by Eclipse with the one generated by the original maven build script I noticed that there are seve
-
Is there a way to determine which apps are using data? Or, for example, if I have used 20 MB of data today, which apps used that data, and how much per app? Thanks
-
Print out of 12 month screen view
the 12 month view is available as an option on screen and for planning is excellent. I would like to be able to print this for reference/other planning. Print options seem to allow only one month at a time. Is there any way to get an A4 print of t
-
FM to find user who locked the object using enqueue...
Hello, How can I find name of user who enqueued the lock object in ABAP ? Regards, Jainam.