Why won't my setup.exe file on my Master Collection CS6 disk open and run in windows 8.1 Adobe claims it works on 8.1?
Anyone else having issues with their install disks for Master Collection CS6 not working? I click on setup.exe and it asks if its ok to run then nothing no error and no windows. Any ideas?
right click setup > click 'run as administrator'.
Similar Messages
-
My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
Cheers, Tom -
Photoshop Elements 12 DVD contains no setup.exe file, just setup.xml files, won't install
Newly opened boxed copy of Photoshop Elements 12 won't install on new installation of Win 8.1. Turned off virus checking (which shouldn't be necessary), Searched files on DVD, unzipping payload files, including the temporary Premier software, and there are on setup.exe files anywhere. Tried viewing XML files with browser, which readers xml. Don't have time to investigate Adobe install procedure, which appears pretty sophisticated (I've written a few years ago). Any clues?
Thanks mytaxsite. Yes, I bought it at Costco, and of course have the serial number on the box. I'm a Microsoft developer, and searched the DVD, copying the contents to a hard drive and unzipping the "payload" files. I understand folder viewing filters and found lots of setup.xml files, which I could have used, with some difficulty, to see where Adobe wanted to put things. But Adobe knows its installation procedure better than I ever will, and so tried to get tech support. I even have full Photoshop CS5 on an adjacent machine, used by my daughter, but wanted to have basic editing functionality on a machine I use for film scanning.
I never allow anything to be installed without a dialog, whether from my own or a removable storage device. The Windows loader apparently didn't detect autoloading functionality and only offered me the options of viewing files and trying to find multimedia, if I recall (which, since it was irrelevant, I didn't note precisely). I just wanted to see the files anyway, at which point I was puzzled by the lack of setup.exe. I did, as Adobe suggested, disable my virus scanning software, but not my firewall. It made no difference, and I expected none. Though I've found no legitimate software that couldn't be loaded with virus scanning enabled.
I suspect your suggestion that I download fresh software from Adobe is the correct one. It is what I expected Adobe Technical support to suggest. Having some confidence in this newish machine, with its newish, and almost unused, BluRay/DVD burner, and my care handling DVDs, I was guessing at some xml-based installation procedure that I might need to install. Few Costco customers, not in the software business would know where to look, so I'm curious about how Adobe could ship something lacking the old-fashioned setup.exe, twenty+ year old technology based on the DOS shell? On the other hand, if there are new standards for installation scripts, I would like to know what they are using. -
I don't find the setup.exe file to begin the install
Hi! I'm trying to install my CS4 on my new laptop, but the install program doesn't show up automatically. So, I try to find the setup file to run it myself, but it doesn't appear either.
What can I do? Thanks a lot!
Daniel.I am also having this issue with CS6 Design Premium, no "setup.exe" file on the DVD. How can such a basic file be missing?
I also tried downloading the install files from online (DesignWebPremium CS6 LS16, DesignWebPremium CS6 LS16.7z) and am having great difficulties installing from them too.
Grrrrr, why is this soooooo difficult? I also just installed CorelDraw!X6 and that was as easy as falling off a log! -
Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.
That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.
-
I am trying to reinstall Windows (would not launch). I removed the partition and started over. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode." I was successful before, what am I doing wrong this time?
Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac -
Oracle 9iLite download setup.exe file does not work
Like many people (I am discovering more by the minute), I am unable to install 9i Lite.5.01. When the setup.exe file is triggered, a hourglass appears for a second, then nothing...
I am installing on a windows 2000 terminal server, therefore I have to go through (Control Panel) Add/Remove Programs. The Oracle Universal Installer says that setup.exe is either a directory or is corrupt.
I have tried a couple of fixes suggested in this forum, such as unzipping the files to /install/disk, but to no avail. I have also tried downloading the software again, but with the same results.
Is there anyone out there who has successfully overcome this problem ?Yes, there has been a problem reported with setup.exe on the Pentium 4 processor.
To overcome the problem, copy the contents of the CD on to your hard drive.
Then search for every occurence of the file symcjit.dll under the base directory where u have copied from your CD.
and rename them to symcjit.old.
Then launch setup.exe.
This should take care of the problem -
So that we may better diagnose DOWNLOAD problems, please provide the following information.
I have downloaded the files and unziped them to their respective folders. But can not find the setup.exe file on Disk 1.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error MsgThe PL/SQL error you have are from runing the program. You have a syntax error in your sql (the statement would have been fine in MS SQL Server, or Sybase). The statement should read in Oracle:
INSERT INTO v_cnt
SELECT COUNT(DISTINCT followup_num)
FROM patient_data
WHERE patient_id = i_patient_id
Also if you are using JDBC to connect to the database you should not need the ';' at the end. -
Setup.exe file does not run after the download
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name East
- Filename All the disks, 1 through 3, have been downloaded and extracted.
- Date/Time Aug 7, 2002
- Browser + Version
- O/S + Version
- Error Msg
I am unable to run the setup.exe file in Disk1 directory. I think we need more information on how to install the server. Please help us ASAP.I found out that besides setting the library, I should also set the classpath.
I tried to set the classpath by setting the environment variable CLASSPATH: path1.jar; path2.jar; path3.jar.
I also tried to set it with the command prompt:
CLASSPATH = path1.jar; path2.jar; path3.jar.
But when double clicking on my .exe file, it still does not run and I still get the NoClassDefFoundError.
Please help. Thanks! -
Problem extracting Acrobat XI setup.exe file - using WinRAR extractor - "Windows cannot find file...
I have downloaded Adobe Acrobat XI from my university download site (so I know it's a legit, safe copy). When I run the .exe file, even as an administrator, it begins to extract using WinRAR self-extracting archive and stops with a pop-up error:
"Windows cannot find "C:\Users\UserName\AppData\Local\Temp\RarSFX0\Adobe Acrobat XI\setup.exe"
I scanned using Malwarebytes, AVG, Spybot, and ran a \scannow command. Nothing finds a corrupt file. Any ideas what could be causing the extractor to not work?
I am running Windows 7 on a 64-bit Dell laptop.SOLUITION - I had to actually download a version of WinRAR extractor. Right click the downloaded AcrobatXI-Windows.exe file and choose "Open with WinRAR" (this option was not available until I downloaded the WinRAR application - apparently the extractor runs automatically but doesn't have full funtionality). Then I nagivated to the Adobe Acrobat folder in the WinRAR window and selected the setup.exe file to run. It opened and installed beautifully.
-
I have tried everything I know to be able to download itunes back onto my computer since the itunes update failed.
I have deleted all the programmes, and checked that they are deleted
I have been struggling for weeks. And iTines seem to want to charge me £25 for support to help me sort it out- I'm not a happy customer!Hello Selfdeterminant,
Have you tried the steps as mentioned in this Apple Support kb for the iTunes Error after iTunes 11.1.4 Update : http://support.apple.com/kb/ts5376
Did you remove all the iTunes and its Components in the Given Order.
iTunes
Apple Software Update
Apple Mobile Device Support ( If unable to remove you can ignore it )
Bonjour
Apple Application Support
If you are unable to download iTunes Setup file using the Default browser then have you tried downloading iTunes with a different Web Browser, if not then try that. ( Internet Explorer, Mozilla Firefox, Google Chrome)
Save the iTunes Installer file in the Location where you can easily find it
After removing iTunes and its components Restart your Computer once and then Right click the iTunes Setup.exe file and run the Program as Administrator
If you are using the 64 Bit version of Windows on your computer then it is Good to change the Install Location from " C:\Program Files(x86)\iTunes " To " C:\Program Files\iTunes " while installing iTunes when it asks for the Location. -
Why won't cloaking hide the files?
The title pretty much says it all. Why won't cloaking hide the files?
I don't want to se the files I am cloaking at all when I cloak them, but they still appear, just with a red line through them.
How do I rid myself of this eye sore?
Thanks,
CyThat much I understood. I would think that there would be some option that would extend cloaking to include removing it from view.
In my case I use a versioning software that produces a file in each directory. (.MySCMServerInfo)
It's a file I do not need to see or edit for any reason what-so-ever. So when the term cloaking is used I naturally think of hiding something from view, not an operation.
I don't think I am the only person that feels this way. Or am I?
Cy -
Mountain 10.8.2 do not like '.exe' file at all !! IT gets Hanged and then Force to restart
After Update with 10.8.2. The System get hang (stuck)
I had to do a forced restart, several time and even a ReBoot in safety more.
AND I FIGURED OUT WHY :
I realized that in one of my folder (Download) I had an ".exe" File; Than have been downloaded (because i got Parallel Desktop that neable window7 to run under the Mac), and causes the problem (system is hanged)
Then when I reboot in safety mode I deleted that file. And Then everything went OK.
But when I plugged my USB key, I got again my system that turn to stop... Then again Force to Restart, remove the USB Key.
Guess what!! In the USB Key (at the root) there was again some '.exe' Files...
In conclusion :
There is an issue with that new release of Mountain Lion 10.8.2 that cause the system to get hang, when "Finder" meet an '.exe' file.
It occurs only when you open your "Finder" then go throughout some folder where you have placed some '.exe' file. Then your system will not respond anymore. You got to force the restart
Just to make it clear, of course I do not want to run an '.exe' file under Mac.
But If like me you have Parallel Desktop in order to run Window7 or 8; you might have some '.exe' file that are located in your Mac Folder…..
Then, when you open 'Finder' and you walk through your folder and meet an '.exe' file, thus you system will freeze!!
Work Arround Solution, that's only happen if your '.exe' File is not associtaed to be open under Window Explorer (if you have Parallel Desktop, of course).
Then, make sure to associate the extension '.exe' to Window Explorer, if you have some '.exe' File that are located in your folder or USB key,
Otherwise your system will freeze and you will have to force the restart.
CheersThat right I do not need to have any .exe file in my Mac environment; but having
installed Parallel Desktop (to have a Window Environment, due to business matters)
you might have from time to time some of that files ins download area or in the USB key.
The Test I made is very simple : I placed an .exe file in an USB Key; then plug in to my Mac
then from Finder open the folder where was that exe file…. Guess what ???
My computer get FREEZE (no respond)… I got to reboot.
Then I do not know what's going on. With the previous version (10.8.1) I never got such of issue ?
Here is the log beofre I had to restart:
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:19 +0200 Finder[141]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should not be used in new applications.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 SystemUIServer[140]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2012-09-21 12:16:20 +0200 com.apple.SecurityServer[17]: Session 100003 created
2012-09-21 12:16:21 +0200 awacsd[66]: Exiting
2012-09-21 12:16:25 +0200 kernel[0]: KLIF ERROR: scan for file /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n timed out, returning 1 as status
2012-09-21 12:16:30 +0200 System Preferences[186]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead. -
Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591 -
Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site without success.
The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load. I can load the editor from its .exe file but not the organizer.
Maybe you are looking for
-
Will not boot
-
Version 11.1.4.62 on WinXP issue: I have re-installed iTunes according to instructions. iTunes give me the error message "AppleMobileDeviceHelper.exe has found an error and terminates. Restarting service does not help. Re-installing does not help. iT
-
Cannot view notes made on sticky notes after saving the pdf file. Any idea on how to fix this?
After listening to a 3 hour recording of a lecture, i finally finished typing my notes. I saved the file the same way as usual and now when i click on the sticky note nothing happens. I click on the comments sections and it says no comments have been
-
How do I unlock security on my Mac to all me to uninstall an app?
I want to uninstall an app. I can't unlock the security feature to change settings so I can do that.
-
I have changed my Apple password, but still receive the message that my account is disabled?
I have changed my Apple password, but still receive the message "you account is disabled" when trying to make purchase with iTunes and App Store?