Why won't my Time Capsule allow me to connect more than one device to the network at a time?
Ok here is the shortest story I can come up with...
Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
I replaced that network with a new TIME CAPSULE and it is doing the same thing. I took my old AirPort Extreme to my work and it works like a charm. My ISP says it is an Apple problem but I have had the same settings both at home and at work. Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
Any suggestions?
I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
I am using a 2TB Time Capsule running DHCP in Bridge Mode. I can't find the software version but updated it while installing it within the last two months.
Under Network Tab
Enable NAT Port mapping is checked
Under the Wireless Tab
we have a 5ghz Network
Radio mode is set to: 802.11a/n-802.11b/g/n (Automatic)
2.4 GHz is Auto
5 Ghz is Auto
I hope this helps....
Similar Messages
-
HT2508 Airport express for more than one device at the same time.
I just set up my Airport Express on my MacBook, but when I try to use this wireless connection on my iPad, I have to disconnect from my existing connection on my MacBook first. How can I use both devices at the same time without having to disconnect?
Hi,
Yes.
Jim -
Can one iTunes Radio account be used on more than one device at the same time?
With an iTunes Match account, can ad-free iTunes Radio be used on two devices at the same time on that same account?
Hi,
Yes.
Jim -
Why I can not connect more than one device at a time with a monthly subscription?
Yesterday I bought a monthly subscription (https://store2.adobe.com/cfusion/store/html/index.cfm?store=OLS-ES&event=displayProduct&ca tegoryPath=/Applications/EdgeInspect) and I got the confirmation of the purchase but I recognize Google Chrome I have synchronized devices but then only see one at a time, not displayed on all at once, can you help me?
Thanks in advance.
Message was edited by: dpcani_marbleGood afternoon where should be logged? In Chrome I'm logged in adobe.creative.com and many times I restarted Chrome and still not working ...
-
Can you use iMessage on the same Apple ID, on more than one device at the same time?
I have an iPad and want an iPod Touch this year, and I was wondering if I could use my iMessage signed into both at the same time? Whilst on the same Apple ID. Thanks for any help.
Thanks
-
Can't connect more than one PC to my network at the same time.
When trying to connect a second wireless laptop to my network, the one already connected gets disconnected. I'm using a WRT110 router(cable connection) that I bought 5 days ago, and two laptops with Win Vista. I don't have any PC wired connected.
First thing which you need to do is upgrade the firmware of your Router. Go to website linksysbycisco.com/downloads... ......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router... here are some wireless settings which you can set on your Router and i think this might make your both the wireless computers go Online...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect... -
Connect more than one computer to a time capsule volume?
Hello. I am considering buying an old time capsule (500G, 2nd generation) as a little in-house server to store data that need to be accessible for more than one work station. Is it possible to connect more than one work station to one time capsule?
ThanksWhile it is possible to connect more than one computer to the Time Capsule......I would not recommend that you buy the Time Capsule that you are looking at.....unless you know that the owner has replaced the hard drive and power supply.
Most of these models never made it much past a few years of operation, so if this is an "original", you have a hint of what will happen not long after you purchase the product. -
Is there a datatype that allows me to store more than one item at a time
Hello Everyone,
Is there a datatype that allows me to store more than one item at a time , in a column in a row?
I have to prepare a monthly account purchase system. Basically in this system a customer purchases items in an entire month as and when required on credit and then pays at the end of the month to clear the dues. So, i need to search the item from the inventory and then add it to the customer. So that when i want to see all the items purchased by a customer in the current month i get to see them. Later i calculate the bill and then ask him to pay and flushout old items which customer has purchased.
I am having great difficulty in preparing the database.
Please can anyone guide me! i have to finish this project in a weeks time.
Item Database:
SQL> desc items;
Name Null? Type
ITEMID VARCHAR2(10)
ITEMCODE VARCHAR2(10)
ITEMPRICE NUMBER(10)
ITEMQUAN NUMBER(10)
Customer Database:
SQL> desc customerdb;
Name Null? Type
CUSTID VARCHAR2(10)
CUSTFNAME VARCHAR2(20)
CUSTLNAME VARCHAR2(20)
CUSTMOBNO NUMBER(10)
CUSTADD VARCHAR2(20)
I need to store for every customer the items he has purchased in a month. But if i add a items purchased by a customer to the customer table entries look this.
SQL> select * from customerdb;
CUSTID CUSTFNAME CUSTLNAME CUSTMOBNO CUSTADD ITEM ITEMPRICE ITEMQUANTITY
123 abc xyz 9988556677 a1/8,hill dales soap 10 1
123 abc xyz 9988556677 " toothbrush 18 1
I can create a itempurchase table similar to above table without columns custfname,csutlnamecustmobno,custadd
ItemPurchaseTable :
CUSTID ITEM ITEMPRICE ITEMQUANTITY
123 soap 10 1
123 toothbrush 18 1
ill just have it as follows. But still the CUSTID FK from CustomerDB repeats for every row. I dont know how to solve this issue. Please can anyone help me.
I need to map 1 customer to the many items he has purchased in a month.
Edited by: Yukta Lolap on Oct 8, 2012 10:58 PM
Edited by: Yukta Lolap on Oct 8, 2012 11:00 PMYou must seriously read and learn about Normalization of tables; It improves your database design (at times may increase or decrease performance, subjective cases) and eases the Understanding efforts for a new person.
See the below tables and compare to the tables you have created
create table customers
customer_id number primary key,
fname varchar2(50) not null,
mname varchar2(50),
lname varchar2(50) not null,
join_date date default sysdate not null,
is_active char(1) default 'N',
constraint chk_active check (is_active in ('Y', 'N')) enable
create table customer_address
address_id number primary key,
customer_id number not null,
line_1 varchar2(100) not null,
line_2 varchar2(100),
line_3 varchar2(100),
city varchar2(100) not null,
state varchar2(100) not null,
zip_code number not null,
is_active char(1) default 'N' not null,
constraint chk_add_active check (is_active in ('Y', 'N')),
constraint fk_cust_id foreign key (customer_id) references customers(customer_id)
create table customer_contact
contact_id number primary key,
address_id number not null,
area_code number,
landline number,
mobile number,
is_active char(1) default 'N' not null,
constraint chk_cont_active check (is_active in ('Y', 'N'))
constraint fk_add_id foreign key (address_id) references customer_address(address_id)
create table inventory
inventory_id number primary key,
item_code varchar2(25) not null,
item_name varchar2(100) not null,
item_price number(8, 2) default 0,
item_quantity number default 0,
constraint chk_item_quant check (item_quantity >= 0)
);You may have to improvise and adapt these tables according to your data and design to add or remove Columns/Constraints/Foreign Keys etc. I created them according to my understanding.
--Edit:- Added Purchases table and sample data;
create table purchases
purchase_id number primary key,
purchase_lot number unique key not null, --> Unique Key to map all the Purchases, at a time, for a customer
customer_id number not null,
item_code number not null,
item_price number(8,2) not null,
item_quantity number not null,
discount number(3,1) default 0,
purchase_date date default sysdate not null,
payment_mode varchar2(20),
constraint fk_cust_id foreign key (customer_id) references customers(customer_id)
insert into purchases values (1, 1001, 1, 'AZ123', 653, 10, 0, sysdate, 'Cash');
insert into purchases values (2, 1001, 1, 'AZ124', 225.5, 15, 2, sysdate, 'Cash');
insert into purchases values (3, 1001, 1, 'AZ125', 90, 20, 3.5, sysdate, 'Cash');
insert into purchases values (4, 1002, 2, 'AZ126', 111, 10, 0, sysdate, 'Cash');
insert into purchases values (5, 1002, 2, 'AZ127', 100, 10, 0, sysdate, 'Cash');
insert into purchases values (6, 1003, 1, 'AZ123', 101.25, 2, 0, sysdate, 'Cash');
insert into purchases values (7, 1003, 1, 'AZ121', 1000, 1, 0, sysdate, 'Cash');Edited by: Purvesh K on Oct 9, 2012 12:22 PM (Added Price Column and modified sample data.) -
Lightroom won't export more than one image at the time
I am having trouble exporting my RAW files as JPEG files. At first Lightroom 4.4 seemed to skip certain photos when exporting and now I'm unable to export more than one image at the time. How can I fix this? I didn't seem to have this problem before the 4.4 update, but then again, the 4.4 update has been running for a few days now. I run on a 32bit Windows 7 with 4GB of RAM.
Lightroom has also been a considerable lot slower since the last couple of days, yet there have been no changes at all to my computer or system or anything - nothing's changed expect for the fact that Lightroom isn't behaving as it used to.
Can anyone help me?I think I've found the problem - I've accidentally 'synced' my folder instead of importing the RAW files. Which brings me to my next problem and question - I've already edited the RAW files and would really like it if there's a way I could re-import the files without losing my changes/metadata, is there anyway that's possible?
-
Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
ZayedThanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?
-
Is there a way to put an item under more than one calendar at the same time?
I use the calendar to keep track of not only my schedule, but my entire family's. For years I had a calendar labeled 'kids.' Now as they're getting older it would be easier to have an individual calendar for each child. Easier for me to track where they are and they could have they're own calendar on their iphone or iphone touch since we all share one cloud account. However, frequently more than one is at the same activity. The calendar program will only allow me to select one calendar to place an event under; as soon as I select another, it deselects the first. Is there a way to place an event under more than one calendar?
(Since I'm still the one driving that needs to know date, time, place, etc type details I don't want them adding it to their own schedule - maybe - on their devides and synching through cloud)You can create many calendars. Here's the tip:
Example: you have 1 son and 1 daughter.
In iCloud ( https://www.icloud.com )
Create 1 calendar called Son ( Choose a color to tell them apart )
Create 1 calendar called Daughter ( Ditto )
Create 1 calendar called Kids
Since you are the creator, you get to see all calendars combined.
Send invitations to each of them
Son gets Son and Kids calendars
Daughter gets Daughter and Kids calendars
So if there an event for Son, just put in that calendar
If it's for both then enter it in the Kids calendar
Likewise for daughter. -
Is there a stereo bluetooth headset that can pair with more than one device at a time?
Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
RickTeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution. -
Drag more than one MC at the same time
Hi to Eo,
i need to drag more than one Mc at the time:
n.b. emc2 is a mc on the main timeline. This code is in a nested MC.
prnt: MovieClip = this.parent as Movieclip;
function drag(e:MouseEvent):void{
if((e.type == "mouseDown") && (GlobalVar.stat == "clicked")){
this.startDrag();
prnt.emc2.startDrag();
if((e.type == "mouseUp") && (GlobalVar.stat == "clicked")){
this.stopDrag();
prnt.emc2.stopDrag();
GlobalVar.drag = false;
this.startdrag() stop to works when i add prnt.emc2.startDrag()..
why?The help documents explain it as follows: "The sprite remains draggable until explicitly stopped through a call to the
Sprite.stopDrag() method, or until another sprite is made draggable. Only one sprite is draggable at a time. " -
How do I use AE to allow more than one device with my cable modem?
I connected by AE to my cable modem at my house in Japan and it works fine on "bridge mode," but only for one device at a time (this laptop, but not my iPod Touch, or vice versa). As soon as I connect a new device, it will kick the other one off. It seems that my cable modem here will only allow one device. Is there a way that I can use my Airport Extreme to allow more than one device and not have to pay the Internet provider extra for multiple IP addresses? How do I go about this? Do I select "share a public IP address" or do I select "distribute a range of IP addresses?" I tried these options but obviously wasn't doing it correctly, because then I lost the connection for everything... Thanks!
It would be best if you "hard reset" the Airport Extreme to clear out the old and conflicting settings and then reconfigure it again.
Hold in the reset button until you see the amber light begin to blink more quickly. Keep holding for another 3-4 seconds when you see this and then release the reset button. That will get the Extreme back to the original starting point.
After you have powered the modem back up after the full reset, you will need to reconfigure the AirPort Extreme again. If you are using he guided setup in AirPort Utility, you will choose the option to "create a wireless network" during the setup.
If you are using the Manual Setup, the Wireless Mode will be "Create a wireless network" and the setting for Connection Sharing would be "Share a public IP address". Adjusting the Connection Sharing setting would be the last thing that you do before you click Update to save settings.
Here, I am assuming that you have a simple cable modem (it will have only one ethernet port), correct? -
Trouble playing music on more than one "airport" at the sae time
Now that I havew added a second airport base..I cannot play music in more than one room at the same time...when I try and choose multiple speakers...it states that the particular airport cannot play simultaneously...i have an HP Pavillion, a Mac Book on a Netgear network router....Is there a set up procedure to allow playing music simultaneosly?
Sorry for the run on question..
also is there Apple live telephone support? i cannot seem to find it
Thanks MikeAre all the Airport Express units using firmware 6.3?
iFelix
Maybe you are looking for
-
Trouble connecting to windows 8.1 64 bit with my nano 6th generation
Help required to sync my nano to my computer
-
my nokia e5 is showing 'iFnKeyState =EFnkeyNext'
-
Finding roles which has many tcodes in the same role using SUIM
Hello Guru's If I want to find a role for a t-code will get through SUIM. But now I have a multiple t-codes(eg,100 t-codes) want to find out the exact role in which all the t-codes are there. Is there any way,please let me know. Thank you Dina Edited
-
Problem with text in detailTextLabel of UITableViewCell
I have an odd problem when changing the detailTextLabel property of a UITextViewCell. If I change the label to an empty string, using something like: cell.detailTextLabel.text = @""; Then at a later point change the text to a different non-empty stri
-
Okay, I have been having the problem of iPhoto closing on emptying the trash, so I took the suggestions and rebuilt my library and then began deleting photos in small groups (I originally had 850 I was trying to get rid of). I've now whittled it down