Why won't Safari display altered uploaded files?

If I make some changes in my web page, some changes in CSS setting, and upload the page, it continues to display in the former format. However, if I check Firefox, the newly edited file appears just fine.
I tried repeatedly emptying the Safari cache, and even used Onyx to empty all browser caches, and of course repeatedly try reloading the page but it still does not update.
Does anyone know why this is so? Is there a solution?
Thanks,
Richard

You confused me a little here. Earlier you wrote:
t I can see the changes in GoLive or BBedit (as previews)
but then you say:
That I am also previewing the file in Safari and also loading from my hard disk at that time. So that suggests to me, since Safari does not render it right
Are you seeing changes made to CSS files when previewing in Safari ... or not? I might have read something wrong, but I had the impression you were saying previews in Safari show CSS changes, while previews online do not.
Also, I think there are two things happening and one is confusing the matter. Earlier you wrote:
But when previewed in Safari, it is not the same — the padding is gone.
My feeling was that this was a separate issue, not a problem with caching. (To my knowledge and in my experience, Safari never uses cached files when viewing files on the hard drive.) My thought was that this is a CSS conflict or syntax problem.
Test for the caching issue (in previews vs. online) with something obvious, rather than your padding style... something like a red border or a text style, so you'll be sure if it's there or not.
Message was heavily edited by: Rachel R

Similar Messages

Why won't Safari show Skydrive pdf files under ios 6

Like a number of others, I posted on the MS Skydrive forum
viz: I notice that when I try to access the pdf files on my skydrive, there will be an error message written as follows "Unable to display "my_pdf_file_name" in this browser. Check your browser settings to see if you have a PDF plugin installed and enabled. If you have a PDF viewing application, you can download the file and open it from your computer" However, when i click download, nothing happens.
I have to share a set of documents via Skydrive and the email link I send opens safari (Ios 6) and bingo! The pdf files cannot be opened and nor do they download.
The response form Microsoft is:
After testing it has been found that the cause of this is the way Safari handles 3rd party cookies. This is not an issue with SkyDrive but instead Safari iteslf. Other websites have the PDF as an attachment allowing it to just open, where SkyDrive has security that must be passed. Safari is not allowing this cookie/script to run and preventing. So, this will need to be an Apple resolution.
Can someone at Apple resolve this or come up with a sensible workaround please?
Pete

Apple is not here, this is a user to user forum.
To contact apple and suggest the change you can go here:
http://www.apple.com/feedback/
Just select your device and fill in the form.
As to how you can get PDFs from skydrive Why not use the Skydrive app?
https://itunes.apple.com/us/app/skydrive/id477537958?mt=8
You can open them natively in the app or after they've opened save them into iBooks, or any other App that may be able to open them.

Why won't safari 7.0.2 open pdf files

why won't safari 7.0.2 open pdf files

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Why won't elements 12 download raw files from Nikon D810?

Why won't elements 12 download raw files from Nikon D810? I got a message saying that the camera model is not supported by installed version of camera raw. How do I fix it?

mydogmaksim
Photoshop Elements questions should be posted in the Adobe Photoshop Elements Forum. Somehow your thread got posted in the Adobe Premiere Elements Forum (video editing).
You can re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
My opinion on this....from the Photoshop Elements perspective...
Nikon D810 is supported by Camera Raw 8.6 and higher (latest version of Camera Raw is 8.7)
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
At the same time, the Camera Raw version needs to be supported by the Photoshop Elements version.
Photoshop Elements 12 appears to support Camera Raw up to 8.5 which does not support the Nikon D810.
Camera Raw-compatible Adobe applications
Solution...
a. switch to Photoshop Elements 13 (comes with Camera Raw 8.6 and can be updated to 8.7).
b. use the DNG Converter in Photoshop Elements 12
ATR

Why won't my CS4 open RAW files(CR2)?

Why won't my CS4 open RAW files(CR2)?

Raw support is version specific. Newer cameras require newer versions of PS.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

Why won't Aperture 2 support RAW files imported from Canon 60D when it does from my Olympus DSLR?

Why won't Aperture 2 support RAW files imported from Canon 60D when it does from my Olympus DSLR?

I'm afriad the fact that your Olympus dSLR is supported is no relevance.
The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Support for individual camera models has to be added one by one, and Apple will update the OS to work with the most recent version of the software. That's an incentive for you to keep up-to-date. So, for support for your 60D you'll need 10.6.5 plus Aperture 3 and/or iPhoto 11.
Regards
TD

Why won't Safari close?

why won't Safari close?

Once you "force quit" it shouldn't happen again.
You can force quit from the Apple menu, Option + Command + Esc or the Activty Monitor located in /Applications/Utilities

How to display the uploaded file

Hi All ,
I have the below requirement .
1. Upload the file (any file type) -- no problem done with FileUpload UI element.
2. Display the uploaded file as icon or link .
3. User should be able to delete the uploaded file using icon or link (depends upon step2 ).
I am struggling with step2 and 3 .
Please guide me
Regards,
Ravi

Hi,
You can use the file download UI element for your requirment. You will have the Resource type context that is used to bind the File upload UI element. bind the same context to the file download UI element. And hence without any extra coding your requirment is achieved.
For deleting the Uploaded file delete the context element of type reource.
For your reference refer to the following link
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
Regards,
Raju Bonagiri

Why won't safari let me open my school website in its browser?

why won't safari let me open my school website in its browser?

I can access it fine with the iMac in my profile running Safari 5.0.5
What OS versions is on your Mac and what version of Safari are you running.
NOTE: "iOS" is not a computer operating system. It;s for Phone Pads, adn Pods. Your COMPUTER IS is probably 10.something, available from :Aboutt hsi Mac':

Why won't FireFox 4 play mp3 files that have been created since the FF update? It will play mp3 files created prior to the FF update. All of the mp3 files have been created in the same manner, as bounces from Logic Pro 9. Thank you.

Why won't FireFox 4 play mp3 files that have been created since the FF update? It will play mp3 files created prior to the FF update. All of the mp3 files have been created in the same manner, as bounces from Logic Pro 9. Thank you.

Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]]

Why won't all my iTunes upload onto iClouds ?

Why won't all music that I have bought from iTunes upload unto iCloud ? I have paid for iTunes, iCloud and iMatch. What is the problem ?

Welcome to the Apple Community.
What formats are the files in, some formats are not accepted, nor are files over 200 MB or those encoded with bitrates less than 96kbps.

Why won't my L4P and LKS files launch on customer's computer?

Events make me almost sure I caused this, but would appreciate help if there's a way to prevent doing this all over again...
Customer had a process file that was running fine, but with an increasing number of staff with access to Lookout he wanted user accounts created and security levels assigned to numerous Lookout objects (accounts and objects were all at default settings). He emailed me the LKS and L4P files, I edited them, and emailed them back.
The L4P and LKS launch fine on my computer, but won't on the customer's. On the customer's computer, launching the LKS file produces a compile error, but doesn't identify the error. I've also emailed the files to a colleague, who replied he had no problem either. Should mention colleague (like me) is running North American Win XP.
Files were generated in Ver 6.02(1) on WinXP machines, and bench tested fine on a Ver 6.1 Runtime also under XP.
The customer is located in Poland, has a Ver 6.1 Runtime, and is running it on a Win NT machine.
So assuming for a moment I caused this anomaly during my editing, why do the files not work at customer's location and why won't the compiler identify what it is?
More to the point, how do I fix this?
JW_Tech

Yo, JPhillips:
Thanks for the tip. Took a look at the err file (see for yourself)...
Lookout Process File Compiler Version 6.1 (build 27)
Copyright National Instruments 1992-2007 All rights reserved.
cannot open source file: C:\Program Files\National Instruments\Lookout 6.1\cedrob.lks
This is the same folder where the unedited files WILL work.
Ryan, I've uploaded the cedrob2.zipfile to the ftp site. Would appreciate you having a look at it.
There is certainly a mystery here. If I'm working at a site where the OS is all English, I weigh how much editing I might have to perform and consider moving my Integrator license from my laptop to the customer's computer (to take advantage of the bigger screen, mouse, keyboard and the on-line editing of Lookout) for the duration of the session. In this case, I was at the site (in Poland) in August and since Polish is not my strong suit, I did all my editing on my laptop and transfered the files to customer's computer via memory stick. Everything worked fine during all that, so emailing the files should not be any different, yes?

Why won't excel read my csv file created with the powersell out-file automatically.

I wrote a PowerShell script that creates a CSV formatted file. The script simply creates a comma delimited string for each entry and adds it to a collection. Then the out-file command write it to a file.
When you open it with Excel each line is put into one cell. If you import the file and specify the "," as the delimiter, it imports just fine. If the data is saved out again as a csv file, the file is about half the size and opens
just fine with excel.
If you open the original file and the file created by Excel with notepad, they look the same.
So the files are different in size, contents look the same, but Excel won't automatically open the original file.
Any ideas of why this happens? Also PowerShell and Excel are both running on Server 2012 R2. Excel is a remote app.
If I do an export-CSV, I get some kind of information about the object.
Here is the script:
foreach ($group in $groups)
   $header += '"' + $group.name + '",'
   $CSVdata = @()
   $CSVdata += $header
   # Create a user entry
   $users = Get-ADUser -filter * |select SamAccountname, Name | sort SamAccountName
   foreach ($user in $users)
      $Groupmembership = Get-ADPrincipalGroupMembership -Identity $user.SamAccountName
      $userentry = '"' + $user.SamAccountName + '",'
      $user
      foreach ($group in $groups)
          if ($Groupmembership.SamAccountName -contains $group.SamAccountName) { $userentry += '"X",'}
          else { $userentry += '"",' }
       $CSVdata += $userentry
      $CSVdata
      Out-File -inputobject $CSVdata -FilePath c:\batch\GroupMembership.csv

Ok the script works exactly like I want it. Thank you very much.
I am trying to understand the script but I am unable to figure out what the line "$keys=$t.Keys|%{$_}"
does. I figured ".keys" was a method but my search for it comes up blank. Do you have a reference you can point me to?

Safari displays a .qfx file rather than writing it

When I connect to my local bank and direct it to download my transactions record as a .qfx file, Safari displays the contents of the file on the window, rather than writing the data to a .qfx file. I do not see this behavior with FireFox. Java scripts are enabled.
I'm running OSX 10.9 on a MacBook Pro.

Hi guys
Thanks for suggestions. Carolyn, I did as you suggested but didn't solve problem. KeeChan, as explained in original post, that is my usual fallback but not all web sites work like that. Try downloading Safari - right click (Ctrl Click) on download button and all you get is the "Download.png" image.
I finally found the answer. A long time ago I had downloaded and used "SpeedDownload" and had deleted it. Somehow, some trace of the app was left behind and the mime association with dmg files was messed up.
You can not get rid of Speed Download by throwing its files away or by using an app cleaner product. You MUST run the Speed Download installer program and select the "uninstall" option to remove it.
My browsers now download dmg files correctly.

Why won't iTunes read an RSS file

I have had Radio National podcasts in itunes for a while but it has not updated since Dec 13 and I went to the website to download the new podcasts and it says that I do not have a RSS reader loaded?
Why won't itunes do it?
thanks
Lee

Are you talking about one of these:
http://www.abc.net.au/radionational/podcasts/program/
Click where it says 'Subscribe in iTunes'. When the page opens, click 'View in iTunes'. When iTunes opens and shows the Store page click 'Subscribe'.
If that doesn't answer it, you need to give more details as to what exactly you are doing.

Why won't Safari display altered uploaded files?

Similar Messages

Maybe you are looking for