Why won't Save as PDF work?

iPhoto hangs up on the first photo book page with an image containing a warning triangle if I try to use Save as PDF. Has anyone else had this happen? I presume it means that the image won't send to the printer, either? Yet, The Missing Manual says you can send photos with warning triangles and let them be printed blurry. Who knows about this? I'd appreciate real experience. Thanks.

Try previewing (and saving the PDF) using this method - http://support.apple.com/kb/HT1040
LN

Similar Messages

  • Samsung 1630w won't save as pdf

    After all the hassles with 10.5 and an hp1012, I just got a Samsung ML1630W. It is wireless, set up with airport (11g) no problems. But it won't save as pdf (in print). It says go to file>save. I hate to jinks a new printer that works, but it seems apple released samsung drivers when leopard came out. I was wondering if this might work. I think this printer is a newer model, though. Any ideas or work arounds.

    Oh, probably just a distiller hiccup. Glad to hear it works now. I have had my share of Adobe background processes problems, too, and I wouldn't have thought to reboot right away either. Make sure to mark this question 'answered' when you get a chance.

  • On Mac, why won't the downloaded PDF form SUBMIT after being filled out?

    On Mac, why won't the downloaded PDF form SUBMIT after being filled out?
    Thank you for the help.
    Kind regards
    Ryan Kohler

    Hi;
    This FAQ should describe the issue - you need to be using Adobe Reader (free) or Adobe Acrobat to fill out the PDF, Preview on the Mac breaks the PDF so it is no longer usable: http://forums.adobe.com/docs/DOC-2653
    Thanks,
    Josh

  • Why won't my iTunes code work

    Why won't my iTunes code work helpppp

    Hi Benrad09,
    If you are having issues redeeming an iTunes Gift code, you may find the following article helpful:
    Apple Support: If you can't redeem your iTunes Gift Card or code
    http://support.apple.com/kb/HT6021
    Regards,
    - Brenden

  • Why does Preview save as PDF version 1.3 instead of version 1.7 sometimes?

    I've noticed something very strange in Mountain Lion when saving a downloaded PDF in Preview.  If I download a PDF to my downloads folder and open it in Preview and get info it says it's PDF version 1.7 and it's about 400 kb . If I then "save as" to my folder it saves it as PDF version 1.3 in a much smaller file save  82 kb.
    Why is this happening when I use "save as" rather than just dragging and dropping it from my downloads folder to another folder where it keeps it as version 1.7 and 400 kb ? 
    Why would Preview save it as version 1.3 instead of the latest version of PDF - very odd?
    Thanks

    Lance000 wrote:
    Etresoft - that doesn't seem right - are you sure that Mac's only option is to save a PDF v. 1.3 when there are PDFs that are already at v. 1.7?
    I was sure, but I was wrong. Upon closer inspection, the "%PDF-1.3" you see in the PDF isn't the whole story. The actual version can be specified elsewhere. It seems Mavericks actually generates PDF version 1.4. Of course, that's not much difference, is it?
    Generally, I think Apple is aiming for cross-platform support with the widest audience instead of all the advanced features that Adobe wants to throw in. Apple views PDF as legacy print technology. If you need more than what Apple provides, you can always buy Acrobat.
    Here is an old marketing flyer from Adobe showing how much more you would get with Acrobat. It is from the Tiger era but you can see there is a whole lot that isn't implemented. But if you bought Acrobat, you would be in the position Apple doesn't want. You would create and send people PDF 1.7 files and they wouldn't be able to read them. What do you do? Tell them to buy Acrobat? It is a common theme here in Apple Support Communities whenever a new OS version arrives. People everywhere suddenly can't print, read PDFs, or do just about anything PDF related. That is because they had previously download Acrobat and it breaks with each OS update.
    http://blogs.adobe.com/loridefurio/files/loridefurio/applePDF02.pdf

  • Why I cannot save a pdf document to desktop--error 21--it will save to acrobat

    Why am I unable to save a pdf doc. to desktop? I get error 21 message. This is a recent problem I was able to save to desktop for a year. I can save it to acrobat

    Hi Edward,
    This error occurs due to a problem in the Adobe Acrobat/Reader functionality used to display scanned documents and/or documents containing JP2K images.
    We are aware of the issue. This issue was reported to us on other threads as well: Adobe Reader Error (21)
    Regards,
    Rave

  • HT4972 Why won't Kindle or instagram work on my I-Touch? Why do either of them require IOS 4 or 5?

    Why won't Kindle or instagram Apps work on my I-Touch?
    Why do either of them require IOS 4 or 5 and why can't Itouch V2 update to IOS 4 or 5 operating systems?

    1. The developer stopped supporting older iOS versions.
    2. A second generation iPod touch can be updated to iOS 4.2.1 but doesn't have enough RAM to run iOS 4.3 or newer.
    (82591)

  • Why won't Safari open PDF-documents after uninstalling Adobe Reader?

    Hi.
    I wonder why Safari won't open a PDF-document after I uninstallet Adobe Reader. Prior to my installation of Adobe Reader, Safari opened PDF's without any diffyculty.
    I've tried to reset Safari but it didn't seem to help at all.
    What do I do?
    Thanks
    Mike

    There might be a residual plug-in interfering with Safari's PDF opening capabilities.
    Installed plug-ins are listed via Safari > Help menu.
    They are located in
    /Library/Internet Plug-ins
    and
    ~/Library//Internet Plug-ins
    (tilde is home folder)
    charlie

  • WHY WON'T STICKY KEYS ACCESSABILITY WORK ON SAFARI/

    WHY WON'T STICKY KEYS ACCESSABILITY FEATURE WORK ON SAFARI? I AM A DOUBLE AMPUTEE AND THIS FEATURE REALLY HELPS ME.
    RANDY

    Do us all a favor, and unlock your Cap keys.  It's considered yelling, and it's a real turn-off for those looking to help posters here.

  • Why won't my lock button work?

    I went to lock my iPod and my lock button won't work. I can't even push it down, it's like stuck down in the hole but it won't pop back up. Everything works fine but I have to wait for it to auto-lock everytime I want to turn it off. Why won't the button pop back up?

    It looks like you have a hardware issue. I don't know why the button doesn't pop up, but You can enable assistive touch. Assistive touch gives you a virtual lock button, so that will solve you problem. You can enable it by going to Settings->General->Accessibillity->AssistiveTouch->On.

  • Why won't my "if" expression work?

    This calculation works:
    IF(A3<1,A3*10,IF(A3<5,20))
    Why won't this one:
    if(A4<1,B4==0,if(A4>1<=2,40,if(A4>2<=3,60,if(A4>3<=4,100,if(A4>4<=5,125)))))
    If you want me to send you the table that I am trying to make this work in, just let me know. Thanks,
    Elaine.

    Never mind, I figured it out! Whew.

  • Why won't megapack for iworks work on my mac?

    Why won't my megapack for iworks work on my macbook pro?

    only pages will work and its crap...what a waste of money.

  • Why won't time capsule router work?

    Why won't the time capsule's wireless router work to allow internet access?  Just got it, new 2 tb!  Lost the excitement of it all now!  Help!  Connecting to new MacBook pros (13" &amp; 2X15"s) as well as a Toshiba laptop.  Followed all the directions and backed up just fine, but have not been able to browse web at all with this crap!

    You do not have to load the airport utility.. a newer version is already included on the computer.
    Just go to the applications / utility directory and start airport utility.

  • File was view only, won't save to PDF - log: OffendingCommand: text (Framemaker 11)

    I have been printing a book successfully for weeks now, and today did an edit to one chapter in the book. Now when I save the book as PDF, I get this in the log:
    %%[ Error: undefined; OffendingCommand: Text ]%%
    Stack:
    /Body
    /T
    -mark-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    I thought I fixed it because it was originally producing a "view only file" message (for the one chapter that I changed) while generating. I renamed the file, turn the lock on and off, and don't get the view only message, but still no PDF, either save-as-pdf of the individual chapter or the whole book.
    Can anyone help? I've never encountered this.
    Thanks in advance.
    Jim

    Thanks, Arnis. This is the entire text from the log file:
    %%[ Error: undefined; OffendingCommand: Text ]%%
    Stack:
    /Body
    /T
    -mark-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%

  • Why won't combined AND statement work

    I want to exclude records based on two criteria's: status = 'M' and the status reason = 52.
    The table contains records with status = 'M' and status reason other than 52.
    Also the table contains records with status other than 'M' and status reason = 52 and I want to include those records.
    I first tried using the statement below reasoning that placing the two criteria's in parenthesis would combine them and only exclude records with M 52
    Where (nvl(Status_CD,'A') <> 'M' AND nvl(STATUS_RESN_CD,0) <> 52 )
    However the query removed all records with Status_CD 'M' and all records with Status_Resn_CD 52. 
    Using the Where Not statement worked.
    Where Not (External_Status_CD = 'M' and EXT_STAT_RESN_CD = 52 ) 
    I’m curious why the first statement didn’t work?
    Can anyone explain why the first query didn't combine the 2 statements but a Where Not did?
    Thank you - Mark

    HI, Mark,
    markjames9 wrote:
    I want to exclude records based on two criteria's: status = 'M' and the status reason = 52.
    The table contains records with status = 'M' and status reason other than 52.
    Also the table contains records with status other than 'M' and status reason = 52 and I want to include those records.
    I first tried using the statement below reasoning that placing the two criteria's in parenthesis would combine them and only exclude records with M 52
    Where (nvl(Status_CD,'A') <> 'M' AND nvl(STATUS_RESN_CD,0) <> 52 )
    However the query removed all records with Status_CD 'M' and all records with Status_Resn_CD 52.
    Using the Where Not statement worked.
    Where Not (External_Status_CD = 'M' and EXT_STAT_RESN_CD = 52 ) 
    I’m curious why the first statement didn’t work?
    Can anyone explain why the first query didn't combine the 2 statements but a Where Not did?
    Thank you - Mark
    Another way of looking at it:
    The condition (x AND y) will be TRUE when both x AND y are TRUE.
    If
    sub-condition x is    nvl (Status_CD, 'A') <> 'M'   and
    sub-condition y is  nvl (STATUS_RESN_CD, 0) <> 52
    then any row with status_cd = 'M' fails sub-condition x, therefore the compound condition is FALSE, regardless of status_resn_cd.
    Likewise, and row with status_resn_cd=52 fails sub-condition y, so the compound condition is FALSE regardless of status_cd.
    You used status_cd and status_resn_cd in one example; but
    EXTERNAL_status_cd and EXT_stat_resn_cd in the other.  That's quite confusing.  Also, you'll confuse everyone (including yourself) if status is abbreviated as stat in some places but not in others.  Either way is okay, but be consistent.  The same goes for abbreviating external as ext; pick one or the other, and use the same word in all places.
    Don't forget to check for NULLs.  If  external_status_cd and ext_stat_resn_cd can be NULL, you should say
    Where Not (    NVL (External_Status_CD, 'A') = 'M'
              and  NVL (EXT_STAT_RESN_CD,    0)  = 52
    depending on your requirements.

Maybe you are looking for