Why won't sound play with YouTube video on my iPad

How do I get sound to play with video? I was trying to play YouTube video from a Facebook post (using app). Video plays, but no sound. How do I fix it?

I am also having this problem, and its confusing the crap out of me when I try to fix it. Between the general settings for "use side switch to:" and the sound settings for ringer and alerts and the lock sound option, I can not figure out the combination to get the sound to work normally. All of a sudden it just had no sound. I think I have tried all the options, changed all of them and there is still no sound, on anything. No Ipad sounds, no keyboard sounds, no video sound, nothing. When I push the volume button up, I get a box in the middle of the screen with a bell that says "sound effects" but there is no bar at the bottom of the box that would usually show the volume going up and down. I click the volume to go up a few times and it just shows me that bell box for sound effects. I have reset the Ipad, and that didn't help. What's even more strange is that in the last few weeks, it has had volume a few times, and then it just stops again. No damage has occurred, no water damage, or dropped at all. Please, someone give me clear step by step directions on how all the settings need to be set. Please?? Thanks.

Similar Messages

  • Why all the sudden I can't play any youtube videos on my iPad?

    Just recently I can't play any videos on my iPad? Any help to correct the issue would be greatly appreciated.

    I do too. I get this image.

  • Why can't I play h264 1080i video on my iPad?

    I tried to play a H264 1080i video on my iPad & iPad mini devices (both of them are IOS-7), but only displayed black screen. I want to know if it is because IOS-7 doesn't support such kind of codec?

    Per Apple:
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG‑4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Why i can't play the youtube videos online?

    Sir, i use the browser Firefox for android in my smartphone. When i try to play the videos on youtube online it doesn't play the vodeo.

    plaese refer these links its helpfull you have to download adobe flash for andriod devices and set on in settings
    http://www.pcnexus.net/2014/03/install-flash-player-galaxy-s5.html
    http://www.pcadvisor.co.uk/how-to/google-android/3417930/install-flash-on-android-kitkat-smartphone-tablet-lollipop/
    https://www.youtube.com/watch?v=B7r-hZptWxk

  • Why can't I see a Youtube video in my iPad?.

    I am trying to see a video from youtube but it send me a message that the video is not formated for mobile. There are other video that can be seen but not this one. Why?

    Because whoever submitted it did not format it for mobile and YouTube has not yet converted it to h.264.

  • Why Won't QuickTime Play Video?

    Hi,
    I use a Power Mac G4; run Mac OS X 10.4.11 Tiger; QuickTime 7.6.4.  Why won't QT play the following video:
    www.globalwebsupply.com/images/mdsmarttool.asx  ?
    Angel

    I use a Power Mac G4; run Mac OS X 10.4.11 Tiger; QuickTime 7.6.4.  Why won't QT play the following video:
    www.globalwebsupply.com/images/mdsmarttool.asx  ?
    1) The Advanced Stream Redirector (ASX) format is not supported by QT X.
    2) The Advanced Stream Redirector (ASX) format is not supported by QT 7 without third-party support such as the Fil4Mac WMV components.
    3) Even the Flip4Mac WMV component only "supports a small subset of the ASX file format."
    On my system:
    1) Trying to play the file directly in QT X using the "Open Location..." option returns the fillowing message, "The movie 'mdsmarttool.asx' can’t be opened because the file is not in a format that QuickTime Player understands. The file may be damaged or may not be a movie file that is compatible with QuickTime Player."
    2) Trying to play the file directly in QT 7 using the "Open URL..." option returns the following message in the "Inspector" window, "Movie Unavailable."
    3) Trying to download the linked file does nothing. (Aborts action without any message.)
    4) Trying to open the URL in Safari returns the following message, "The operation couldn't be completed. A Microsof Media Server (MMS) error was encountered. (-19160) Try again. If the problem persists, contact the website administrator."
    Based on these results, it would appear that there may either be an access problem or a file type support problem.

  • My mac won't read my external harddrive's videos that I took with my Nikon.  Half the videos won't play, and those are .avi files.  WHY won't they play anymore and how can i retrieve them?

    My mac won't read my external harddrive's videos that I took with my Nikon.  Half the videos won't play, and those are .avi files.  WHY won't they play anymore and how can i retrieve them?

    What exactly is your problem? Is it, (a) your Mac doesn't read your external disk, or, (b) you can't retrieve your videos, or, (c) you can't play them, or, (d) you were able to play them at one point, but not any more.
    What version of Mac OS X are you using, what app are you trying to play your videos with, what happens when you do, and what error messages, if any, do you get?

  • Why won't apple tv play some youtube videos it used to play?

    Why won't apple tv play some youtube videos it used to play?

    Ah I see what you mean. Do these specs help:
    Format : MPEG-4
    Format profile : Base Media / Version 2
    Codec ID : mp42
    File size : 525 MiB
    Duration : 20mn 59s
    Overall bit rate : 3 494 Kbps
    Encoded date : UTC 2009-08-19 08:38:05
    Tagged date : UTC 2009-08-19 08:38:35
    Video
    ID : 1
    Format : AVC
    Format/Info : Advanced Video Codec
    Format profile : [email protected]
    Format settings, CABAC : Yes
    Format settings, ReFrames : 5 frames
    Codec ID : avc1
    Codec ID/Info : Advanced Video Coding
    Duration : 20mn 59s
    Bit rate mode : Variable
    Bit rate : 3 333 Kbps
    Width : 1 280 pixels
    Height : 720 pixels
    Display aspect ratio : 16/9
    Frame rate mode : Variable
    Frame rate : 23.976 fps
    Minimum frame rate : 23.810 fps
    Maximum frame rate : 24.390 fps
    Resolution : 24 bits
    Colorimetry : 4:2:0
    Scan type : Progressive
    Bits/(Pixel*Frame) : 0.151
    Stream size : 501 MiB (95%)
    Writing library : x264 core 66 r1114 a933a3e
    Encoding settings : cabac=1 / ref=5 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=umh / subme=7 / psy_rd=1.0:0.0 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chromaqpoffset=-2 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=2pass / bitrate=3333 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.10
    Language : English
    Encoded date : UTC 2009-08-19 08:38:03
    Tagged date : UTC 2009-08-19 08:38:35
    Audio
    ID : 2
    Format : AAC
    Format/Info : Advanced Audio Codec
    Format version : Version 4
    Format profile : LC
    Format settings, SBR : No
    Codec ID : 40
    Duration : 20mn 59s
    Bit rate mode : Constant
    Bit rate : 156 Kbps
    Nominal bit rate : 160 Kbps
    Channel(s) : 2 channels
    Channel positions : L R
    Sampling rate : 48.0 KHz
    Resolution : 16 bits
    Stream size : 23.4 MiB (4%)

  • I can not hear the sound on a youtube video that appears within an app.  I can hear sound on youtube videos outside of the app.  This is strange, because on other ipads the sound does play within the app.  Is there something I need to change in settings?

    sound does not play on youtube video with an app.

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • If more than 12 tabs with youtube, video and sound start corrupted

    If i open more than 12 tabs with youtube videos and let then open, on every new tab video and sound corrupted.
    I'm using Firefox 9 x64 nightly and Flash 11 beta2 x64.

    Hi,
    What operating system are you on?
    Does this only happen with the nightly or can you reproduce this on other browsers as well?
    Are videos playing on the other tabs?
    To confirm what you are seeing:
    12 youtube pages are open by the time you get to 12 or 13 the video and audio are corrupted?
    Thanks

  • Firefox 3.6.3 wont play embedded youtube videos. It comes up with "an error occured please try again later. this happens all the time

    Firefox 3.6.3 wont play embedded youtube videos. It comes up with "an error occurred please try again later. this happens all the time. If you click to go to youtube the clip plays.
    == This happened ==
    Every time Firefox opened

    I was having the same issue up until I found a solution myself a few minutes ago. If you have "Accept Third Party Cookies" un-checked it will not allow the embedded "Third party" youtube videos to load. You can either Check the box to allow third party cookies or add an exception to allow youtube.com WITHOUT the www. You just want it to be Youtube.Com.
    To do so just go to Tools: Options: Privacy: Exceptions: Type in Youtube.com and click Allow. Then click Close and OK. It should start working immediately.

  • My macbook pro won't play any youtube video. I always get a plug-in failure message! How can I solve it? I already did all updates, reinstalled flash player but nothing helps!

    My macbook pro won't play any youtube video. I always get a plug-in failure message! How can I solve it? I already did all updates, reinstalled flash player but nothing helps!

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • Having lagging problems with YouTube videos, it simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again.

    I have been having lagging problems with YouTube videos for a number of months now. It simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again. Even with little 2 and 3 minute videos.
    I have a fast computer and my webpages load really, really fast. I have FireFox 4 browser and a Vista Home Premium 64-bit OS. So I don't have a slow computer or web browser. But these slow YouTube vids take way too long to load for some reason.
    Does anyone have any idea how I can speed up YouTube?

    Hi
    The forums are customer to customer in the first instance, Only the mods (BT) will ask for personal information through a email link. Would you mind posting your Hub stats & BT speed test results this will help all with diagnosis-
    To post the full stats from your router
    for home hub - 192.168.1.254
    Navigate to ADSL Settings or use the A-Z at the top right
    Click on More Details and then post the results.
    Run BT speed tester and post the results from http://speedtester.bt.com/
    If possible it would be best to connect to the BT master socket this will rule out any telephone/broadband extension wiring also consider the housing of the hub/router as anything electrical can cause problems as these are your responsibility, if these are found to be the case Openreach (engineer) will charge BT Broadband, which will be passed onto you, around £130.00.
    Noisy line! When making telephone calls, if so this is not good for your broadband, you can check-
    Quite line test dial 17070 option 2 and listen - should hear nothing best done with old type analogue phone digital (dect) will do but may have slight hiss If you hear noise- crackling pops etc, report it as a noisy line on your phone, don’t mention broadband, Bt Faults on 151.
    As for your FTTC its available in some areas between 40% & 80% of customers in enabled areas can receive it!
    Mortgage Advisor 2000-2008
    Green Energy Advisor 2008-2010
    Charity Health Care Provider Advisor 2010-
    I'm alright Jack....

  • I can't play any YouTube videos

    I cannot play any videos in Safari 6.1.2.  Every time I try to, I get an error message telling me "Flash out-of-date".
    I updated Flash to the lattest version, I have cleared my cache in references.  YouTube videos still don't play.
    Any suggestions?

    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
    Step 1
    You might have to log out or reboot before a Flash update takes effect.
    Step 2
    In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Check Now. Quit and relaunch the browser.
    If the warning persists, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
    Flash Player (failing).plugin  
    You may be prompted for your login password.
    Step 6
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 7
    If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked
    Allow (or Enable) plug-ins
    Then click the button marked
    Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 8
    Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • Why doesnt the sound play when i mirror my laptop to my apple tv play?

    why doesnt the sound play off my speakers when i mirror my laptop to my apple tv?

    Answers can only be as helpful as the details provided.  And none were given here.  It is likely an issue with the device settings, and or a conflict with the type of audio encoding used in the video and the device(s) [tv, stero, amp, etc.] actually playing the audio.

Maybe you are looking for