Why won't the font formatting options appear in the format bar in full screen mode?
The font formatting options (bold, italic, and underline, and left, center, right, and justified) do NOT appear in the format bar in full screen mode.
I'm running version 2.2 of iBooks Author and 10.10 of the OS X.
I've included screenshots bellow.
I think you need to ask Apple to fix that
http://www.apple.com/feedback
Similar Messages
-
When using TextEdit, the font as it appears on the screen is ok, but after printing, the font is much smaller on the paper than the chosen size. (in this case 14)
How do I correct this?Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert -
I have a MacBook Pro "Core i7" 2.7 13" Early 2011 and osx mountain lion, but i can't make the Airplay Mirroring option appear in the menu bar. Help please!!!
Go to system preferences below screen>display and click show mirroring menu
-
JUST PURCHASED A MAC TODAY. LION OS. NEED HELP INCREASING THE SIZE OF THE FONTS ON THE DESKTOP. EVEN THOUGH I HAVE A LARGE SCREEN, THE TYPE SIZE IS VERY SMALL. GOING TO WORD AND CHANGING THAT TYPE SIZE IS ALL I HAVE FOUND IN HELP TOPIC.
Finder > View > Show View Options
Change the text size to whatever you want. -
Hi
My Thunderbird is running with ubuntu OS and while using some shortcut key my thunderbird mailbox switched to full screen mode. now i am not able to resize it's view and also not able to see minimize, maximize and close buttons on top left corner.
Please help me out.
ThanksI'm also running Ubuntu. Not sure how you got there, but you can try a Control-Q to quit. Then restart it and hope in comes back normal.
-
In Lion, Safari pages hang in full screen mode. If you exit full screen mode, the next page you intended to view appears.
This happens nearly every time I use Safari. I will be clicking on links, when it appears to hang. By exiting full screen mode, upon minimizing the next page I was intending to view appears. This does not happen on all websites, but many that I visit.Here's a stupid question, but I'm sure I'm not the only one - how exactly DO you minimize the safari fullscreen mode?? I keep reading about orange or yellow tabs which don't exist, at least on my 27 iMac. Control m doesn't work either. I wish Apple would have a basic 3 or 4 page instruction manual on this. Unless there are major bugs still. By the way, this is only one of many problems I'm having with Safari. Occasionally the tool bar just dissappears. And, don't get me started about how the dock in Lion simply stopped accepting some icons, including Firefox. None of these problems happened when I first installed Lion. Each upgrade seems to have more bugs, not less.
-
Do not show the Mac menu bar and the Dock in full-screen mode option not available
"Remote Desktop Connection" for mac has an option to
hide the menu bar in full screen mode. I am unable to locate this option in the new
Microsoft Remote Desktop. Without this option the remote desktop connection bar becomes completely inaccessible. And since the old "remote desktop connection" program has poor support for windows 8.1 I cannot go back.
Is there a workaround? Can you please add this important feature back in?
BlogH,
I am afraid that we have no solution or workaround for this. I will help to submit this as a customer wish to the product team.
Thanks for the feedback.
Jeremy Wu
TechNet Community Support -
Why does Safari not automatically open in full screen mode?
In Yosemite, if I'm in full screen mode, then I close my browser (completely quitting, not just closing the window), then re-open Safari, I am not in full screen mode. The browser corners are pulled to the maximum screen size but I am not in full screen mode.
Does anyone know a solution to this? Is this a bug or a "feature?"
Thanks,
MasonI have never used Span before, but inspired by your post, I tried it.
My results are the same as yours in non-fullscreen mode, but different in full screen mode.
When I press "F", image 2 appears on monitor A (as you said), but briefly I see image 1 on monitor C, then it blacks out. Pressing "F" again reveals the two images in their original positions.
If I select a block of images, but not all the columns of images on monitor B, the images are somewhat randomly assigned to A and C. When I press F, the images on C move to A, and C blanks out to black.
Now I know why I have never used Span I think!
What is the purpose of this thing?! -
I have downloaded several new fonts. They appear in the Font Book. Why are they not in Word so that I can use them?
I have downloaded several new fonts. They appear in the Font Book. Why are they not in Word so that I can use them?
-
I recently downloaded the new iTunes version. Why doesn't my new uploaded music appear in the top of the "Music" playlist?
First see if Finder Preferences has the box checked for... show CD, DVD, iPods checked.
Sometimes dirty DVDs won't read, mine is ery particular about smudges and scratches.
Try a SMC Reset:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset. -
Why does the properties menu not appear with the templates?
Hi,
This is a bit hard to explain but maybe someone will get it.
If you draw a div on your deisgn window 'draw AP div' then
click somewhere on that div again, in the design window, then you
get a list of properties at the bottom such as width, height, top,
left, z-index etc....ok.
Now if i load the '3 column hybrid header and footer
template' and click on any div on the deisgn window of this
template then i dont get this properties menu at the bottom. The
width in the css template are set in 'em' btw if that matters.
Now i am thinking there is a fundmental difference betwee the
divs in the template than drawing a div using the 'draw AP div'
tool.??
It's kinda of like the templates are using pure css whereas
the AP div is a mixture, ok i am sure i am WAY of the mark here and
this is just a little thing. Can someone explain?
thanks for any advice!> Now if i load the '3 column hybrid header and footer
template' and click
> on
> any div on the deisgn window of this template then i
dont get this
> properties
> menu at the bottom.
That's because the div *you* created was Absolutely
Positioned, and there is
a specific inspector for absolutely positioned elements. But
the divs in
the 3-column hybrid header and footer are NOT absolutely
positioned and so
you do not get the special inspector. If you are not sure
about the
difference between absolutely positioned and non-positioned
elements, then
you would be well advised to NOT use absolute positioning
until you do. It
will create big problems for you if you ignore this.
> The width in the css template are set in 'em' btw if
that matters.
That makes the container expand in width as the font size is
expanded by the
visitor, which is what is meant by the 'hybrid' term in the
sample file's
name.
> Now i am thinking there is a fundmental difference
betwee the divs in the
> template than drawing a div using the 'draw AP div'
tool.??
Yes, definitely. This may help you understand positioning a
bit -
There are 4 different types of positioning:
Absolute
Relative
Fixed
Static
Here is a brief explanation of each kind of positioning (with
regard to
placement of elements on the page only)....
Position:absolute (or A/P elements)
This does several things -
1. It 'removes' the element from the flow of the code on
the page so that
it can no longer influence the size or position of any other
page element
(except for those contained within it, of course).
2. The absolutely positioned element takes its position from
the position of
its closest PARENT *positioned* element - in the
absence of any explicitly
positioned parent, this will default to the <body> tag,
which is always
positioned
at 0,0 in the browser viewport.
This means that it doesn't matter where in the HTML code the
layer's code
appears (between <body> and </body>), its
location on the screen will not
change (this assumes that you have not positioned the A/P
element within
a table or another A/P element, of course).
Furthermore, the space in
which
this element would have appeared were it not positioned
is not preserved
on the screen. In other words, absolutely positioned elements
don't take
up any space on the page. In fact, they FLOAT over the page.
Position:relative (or R/P elements)
In contrast to absolute positioning, a relatively positioned
page element is
*not* removed from the flow of the code on the page, so
it will use the
spot
where it would have appeared based on its position in
the code as its
zero point reference. If you then supply top, right,
bottom, or left
positions
to the style for this element, those values will be
used as offsets from
its
zero point.
This means that it DOES matter where in the code the
relatively positioned
element appears (, as it will be positioned in that location
(factoring in
the offsets) on the screen (this is true for any placement in
the code).
Furthermore, the space where this element would have
appeared is
preserved in the display, and can therefore affect the
placement of
succeeding elements. This means that the taller a relatively
positioned element is, the more space it forces on the page.
Position:static
As with relative position, static positions also "go with
the flow". An
element with a static position cannot have values for
offsets (top, right,
left, bottom) or if it has them, they will be ignored. Unless
explicitly
positioned, all div elements default to static positioning.
Position:fixed
A page element with this style will not scroll as the page
content scrolls.
Support for this in elements other than page backgrounds is
quirky
There are several other things you need to know:
1. ANY page element can be positioned - paragraphs, tables,
images, lists,
etc.
2. The <div> tag is a BLOCK level tag. This means that
if it is not
positioned or explicitly styled otherwise, a) it will always
begin on a new
line on the screen, and b) it will always force content to a
new line below
it, and c) it will always take up the entire width of its
container (i.e.,
width:100%).
3. The placement of A/P elements *can* affect the BEHAVIOR of
other
elements
on the page. For example, a 'layer' placed over a hyperlink
will mask that
hyperlink.
You can see a good example of the essential difference
between absolute and
relative positioning here -
http://www.great-web-sights.com/g_layersdemo.asp
You can see a good demonstration of why using layers for a
page layout tool
is dangerous here -
http://www.great-web-sights.com/g_layer-overlap.asp
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"rams30" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> This is a bit hard to explain but maybe someone will get
it.
>
> If you draw a div on your deisgn window 'draw AP div'
then click somewhere
> on
> that div again, in the design window, then you get a
list of properties at
> the
> bottom such as width, height, top, left, z-index
etc....ok.
>
> Now if i load the '3 column hybrid header and footer
template' and click
> on
> any div on the deisgn window of this template then i
dont get this
> properties
> menu at the bottom. The width in the css template are
set in 'em' btw if
> that
> matters.
>
> Now i am thinking there is a fundmental difference
betwee the divs in the
> template than drawing a div using the 'draw AP div'
tool.??
>
> It's kinda of like the templates are using pure css
whereas the AP div is
> a
> mixture, ok i am sure i am WAY of the mark here and this
is just a little
> thing. Can someone explain?
>
> thanks for any advice!
> -
Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?
Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David -
I purchased songs from Itunes store and I would like to record a CD to my parents with specific songs but when introduce the cd a message appears that the songs are not in MP3 format, how could I convert them?
Hello
In itunes...preferences you can change the setting to import songs instead of mp4 to mp3. Afer changing this setting, right click to the songs and than you are able to convert to mp3. ths's it -
I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.
What can I do?Thank you, pvonk, but:
To be more precise: I am talking about the logging-in within the System Preferences on my iMac.
When trying to log in with the old ID, I get no access, i.e. it says "Try again"...-Trying the same with the new one gives me the result I mentioned in my first question...
Now I found out how to do it: I had to erase all accounts-then I could sign in with my Apple-ID. Thanks again. -
I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar. The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks
AirPlay
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Maybe you are looking for
-
Help with Select Lists in Classic Report
Hello, I working with APEX 4.1. Oracle 11. I have a simple classic report with 4 columns (Username, Role, Read, Update). The Read and Update columns are Select Lists with values of "Yes", "No". Report looks like this: Username Role Read Update JSmith
-
Email being received but not sent
all of a sudden, my email stops sending (yet still receives). i get the following error message "This message could not be delivered and will remain in your Outbox until it can be delivered. Verify that you have addressed this message correctly. Chec
-
Hello, I want to convert smartform output to html and send the output in an email body. I have followed the blog Sending HTML Email from SAP CRM/ERP and got the output in outlook but its not formatted correctly in other email clients. If any body els
-
Download error in CC. Cannot download LR & PS!
Help! I purchased the $9.99 special for Lightroom & Photoshop. After downloading creative cloud, I tried to download the apps & I keep getting an error message! UGH! HELP HELP HELP, please!
-
My laptop RS232 port not working
I am having a HP make laptop. I usually use this laptop to communicate with a Delta Tau (USA) make motion controller for our industrial automation projects. But recently while working all of a sudden my laptop RS232 communication problem stopped work