Why won't the Quick Select tool select transparent canvas.

I remember being able to select anything on the canvas with my Quick Select tool in CS5.5 Photoshop Extended. Recently, making the switch to CC, the Quick Select tool will show my slection as I drag along the canvas, but once I release the mouse, the selection seems to be reduced to the visible pixels. I was intentionally trying to fill the transparent sections with my effects as well.
Mind you, the magic wand will select transparent pixels just fine, but it also adds unintentional sections which is irritating. I should probably also pint out that I already looked into the "lock transparence" option in the layers, but I did not activate anything of the sort.

I see how my question can be kind of vague, sorry about that.
I have an image with a transparent background and a layer with, as stated below, pixels missing. With the wand, when I select a section of the layer that has no pixels, it selects every transparent section of that layer within the canvases borders. Thing is, I only wish to select a particular transparent section without touching the existing pixels. My hands are not as gifted as I would like them to be when painting a mask unless I zoom in ten-fold for every inch of the image.
To clarify further, the Quick Select tool's marquee shows everything working as I would expect it to until I release the mouse button. Then, for a reason beyond me, the selection gets reduced to existing pixels in the layer only.

Similar Messages

Why won't the Clone/Heal Tool remove a white spot?

After being embarrassed by failing to check the Clone/heal tool to make sure the opacity was set correctly, I am encouraged to ask another question that was not affected by the appropriate correction that made the tool work fine under most circumstances. However, using LR4 (and previously LR 3) )iMac 27 quad) at odd intervals, certain images show up with a single white spot, usually on a blue background, that cannot be removed or cloned with the LR Clone/heal tool. It can be removed with the clone tool in PS but not in LR. I don't know where the spots come from. They sometimes show up in a sequence of 3-4 or just singly. A copy of one is attached here. I don't know if this spot is an aberation in LR or from my cameras. Since it's happened with different cameras, I presume this is some problem with LR. Any comments?

OK. Now I'm doubly embarrassed! You were right again! It was a random adjustment brush stroke that I easily deleted. Now all I have to do is figure out how it got there and avoid doing it again. The same exact spot has been showing up on various images over the last few years in approximately the same place. There are no other adjustment brush strokes on the image. I guess it could have gotten there when I used the brush on other images nearby and forgot to close it before going to the Basic Development section on the new image. I'll probably never figure it out but thanks to your help I can certainly fix it now in LR. FYI, a moment ago I intentionally put a white spot in the blue with the Adjustment Brush and then tried to remove it with the Spot/Heal Tool. I discovered that without a lot of playing around I couldn't even circle the spot with the tool. I only got the hand symbol. There must be some relationship between the two that I haven't seen documented.

Why is the "Quick Selection Tool" working so slowly? - Photoshop CC in Windows 7

Every time I try to use the Quick selection tool, it takes a REALLY long time to select. I had CS5 and it was super fast, even with large RAW files. Now with CC, it takes at least 20 minutes to select a person out of a photo.
I already tried "resetting" the tool - that did not work at all.
Please help!

I mentioned working on my laptop without GPU acceleration, and how much it slowed everything down, but Quick Select was still laggy after the driver updated and GPU acceleration restored. This is a reasonable laptop with i7, 16Gb and GTX680. Thankfully, I got my main system back yesterday, and Quick select is pretty much instant.
But there shouldn't be that much difference. The big box has six core running at 4.2Ghz (under load) 32GB and GTX570, so while it is certainly more powerful, the difference in performance in respect to Quick Select is not proportional. I've just tried reducing cache levels on the big box from the '6' it usually runs at right down to 2, but it still responds instantly even with large files. I have GPU set to Advanced, and tile size to 128 on both systems.
Another odd thing is that I only have 1GB vRAM with the GTX570, where the GTX680 has 4Gb of faster vRAM. But maybe Quick select is not a big user of GPU acceleration.
So no real help I am afraid. I have looked through the GPU FAQ, but nothing helpful there. OK, I have just found a more detailed article on GPU acceleration, and it mentions a lot of features, but not Quick Select, so it could be that GPU is irrelevant. The laptop is Windows 8.1 as opposed win 7 for the big box, if that makes a difference. Can you correlate anything between our systems? I hate to post this without any suggestions, but I'm stumped.
There are tricks to aid Quick select.
Make a copy of the layer, and apply Curves and/or Levels directly to the layer, and try to increase contrast between the subject and background. Use this layer to make the selection, then switch back to the normal layer to use the selection.
I don’t know if this will work as I have just thought of it. Copy the layer, and Free Transform it to a smaller size. It will be image dependant, but Quick Select is much faster with images below about 1500 pixels wide. Use Quick select on the smaller image layer, and copy the selection to a new layer. FT it back up to size, and it should fit. This would only be useful if you are going to use Refine Edge right after, and will have obvious limitations.
Make sure you report back if you find a solution.

I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus. How do I fix this?

I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus. I've reinstalled twice and it will work for a little while and then get stuck again. When I select something, I have one shot at it and as soon as I let go of the mouse it switches to minus and I can't add anything else. How do I fix this?

When a tool misbehaves, go over to the far upper right corner of the tool options area and click the four-lined square. Choose Reset Tool from the popout menu.

Cannot find the Quick Selection Tool (previously paired with the magic wand tool) on Illustrator CC (newest version installed on October 14, 2014)

I have just installed a new version of Illustrator CC and CS6 on October 14, 2014 and I couldn't find the Quick Selection Tool on this version, previously this tool is located with the magic wand tool

I don't remember a quick selection tool in Illustrator. Are you sure this was in Illustrator?

How do you change the minus symbol on the quick selection tool to a plus symbol? im finding it difficult to select an area.

how do you change the minus symbol on the quick selection tool to a plus symbol? im finding it difficult to select an area.

You can use the Alt/Option key to toggle between add + and subtract -
http://helpx.adobe.com/photoshop/using/making-quick-selections.html
First though select the Add to Selection in the tool options bar for that to work.

When I use the quick selection tool in Photoshop CS6 my monitor flickers

When I use the quick selection tool my monitor starts flickering what do I need to change in my set up.

I'm sorry Jeff I know better. I'm using Adobe CS6 and running Window 8.0 operating system. Thanks for your help. I also run Adobe photoshop element 11 on the same system with no problems
<Removed by Moderator>

Can we disable the anti-alias option for the quick selection tool?

Can we disable the anti-alias option for the quick selection tool?
I can deselect it with the magic wand but not with the quick selection. Any ideas?
thanks,
Dominik

I don't think you can, but in the refine edge dialog you can use the contrast setting to get rid of most of the anti-alias.
MTSTUNER

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your

I have a comment. I am very upset with Photoshop and all your tutorials regarding the quick select tool. I have watched many tutorials and read instructions until I am blue in the face. This tool does not work. It is all over the place and all of your tutorials make it look so simple. How can you advertise this as a viable tool when it just doesn't work?

It is all over the place and all of your tutorials make it look so simple.
This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
How can you advertise this as a viable tool when it just doesn't work?
Concluding something does not work because you fail at using it is not necessarily always justified.
The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

The quick selection tool is freezing Photoshop CC.

Anyone else had this problem? Everything else seems to work fine but when I try to use the quick selection tool, Photoshop freezes and I have to shut it down. I can't find much online about this.
I'm on a Mac
Processor 2.3 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.5 (11G63)

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
What have you done for general trouble-shooting so far?
Photoshop: Basic Troubleshooting steps to fix most issues

When I click on the "quick selection tool" and try to select something, it just "draws a line"

When I click on the "quick selection tool" in Photoshop CS5, and try to select something, it just "draws a line" as if the diameter were very thin and it dones't select anything.
Thanks.

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

I would like cut out an object using the quick select tool and drop the object into another picture. Can anyone help

I am using background pictures and want to cut out objects from other jpegs using the quick select tool and drop them into the background picture. So if i have a banana and select the object i need to copy the banana into the other background.
Hope this makes sense.
Gary

Select banana. Right click>layer via copy. Move tool. Click and drag to other file. Drop on image.
OR: load the background and banana in one stack (File>Scripts>Load File Into Stack). Select banana and layer via copy or create layer mask.
Benjamin

For elements 6 Using the Quick Select Tool- Best Settings

I would like to hear feedback on best setting using elements 6 for the Quick Select Tool- Trying to remove a background for a Product Image.
Thanks!

Perhaps you could post your sample image here to get informed suggestions.
There are many ways to delete the backgrounds but they all depend on the type and complexity of the photo.
Good luck.

Why there is no quick selection function in adobe photoshop 6.0.1 [was: cs6.01]?

Some one my help? why there is no quick selection function in my adobe photoshop 6.0.1 [was: cs 6.01]?

What John Waller just said.
And your screen shows it is the archaic, totally superseded Photoshop 6.01, and that was in no way associated with any CS (Creative Suite), so your question title indicating you had "cs6.0.1" was massively and annoyingly misleading and wrong.
You must be running an ancient machine if that oldie runs on it.
What's worse you are running an illegal, pirated and hacked version of Photoshop. You are breaking the law.
Please don't come back here until you have bought a legal copy of Photoshop.

Why won't the Quick Select tool select transparent canvas.

Similar Messages

Maybe you are looking for