Why won't these tasks finish

This is my debug results from my package. All my Data flow Tasks run a stored procedure with different parameters and when complete send the attachments to email recipients. But some are not finishing. when I go to any of the incomplete data flow taskd and
hit the run button, all the other ones turn green and the job completes.
Can anyone else experienced this and could someone tell me what parameter to switch?

What is happening is one of the file copies occurs after the oledb send to Excel so the file copy over writes the data in the Excel table for just the one task.
When I disable that copy task, the copy Excel DFT task hangs in the final task.
This is what I am attempting to do:
1) Copy 6 blank template files to a directory
2) Run 6 DFT's that populate the empty template files
3) Email the 6 Excel files as attachments
My plan:
Sequence container for 6 copies which are connected to each other
Connect the 6 DFT's and send email when complete
What do I need to do differently?

Similar Messages

Why won't these pop ups go away

I tried downloading untorent and once it was open I said screw it to learning how to use it and threw it in my trash and deleted it. After that I can't stop getting popups! I use google and a pop up comes up at the bottom ,other sights I go to they pop up on both sides of the window. Also a whole new window opens for some gaming sight or if I use netflix then it jumps to a new tab for some random sight. For example I click on a movie or next for the next page then it opens a whole new tab to some random sight. I don't know what to do please help :/

You probably installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Why won't these slices work?

Wondered what I'm missing...made a sliced images remote
rollover banner in Photoshop/Image Ready, brought it and its html
into DW 8, tested that html in a few browsers, worked great, then
brought in appropriate (I thought!) code from that html into my
index page's html, tested it, no go! No rollovers...(supposed to
rollover the various wireless devices and a word pops up).
http://www.enhancedwireless.net/indextester.html
Here's what it should look like (I used layers for this one)
http://www.enhancedwireless.net/index.html
Problem is I need to use the sliced remote rollovers version
because my layers version uses png's and MS IE won't read png
transparency properly...forgetting the IE workarounds, could
someone tell me how I can get my slices version to work.
Thanks much
KB

Sorry, not a Firefox support issue.
Try a support forum for your brand of 'burner' software or a forum dealing with recording to CDR media.

Why won't these videos fit on a 120min 4.7Gb disc?

There have been situations in which when I am using 120 min 4.7GB DVD+R discs, that iDVD tells me that the video/videos I insert onto a project exceeds the macimum duration of the disc. It doesn't make any sense when I drop a 1 hour and 30 min.,700mb .avi movie onto a project and it tells me that. Why is this happening?

iDVD mpg-2 compresses everything. The size of your raw content in MB isn't significant - what IS significant is the running time in minutes. iDVD can put up to 60 minutes of content on a single-layer disc in 'Best Performance' encoding mode or up to 120 minutes ion the 'High Quality' of 'Professional Quality modes.
BTW, 4.7 GB is the advertising capacity in decimal form; as far as a computer is concerned, the capacity is 4.37 GB.

Why won't these files run on my Archlinux?

I wasn't really sure which category to post this in.
Anyway I'm trying to run the files in the bin/ directory of the archive I've uploaded here:
http://www.filedropper.com/jaglinuxtools
On Archlinux all I get is:
bash: ./aln: cannot execute binary file
and so on for the other three files.
I can boot up a live CD of another Linux distribution (kubuntu in this case), mount my Linux partition, and run the files from the same directory, and they all behave as they're supposed to.
What's the deal here? I'm sure my permissions are set up correctly in Archlinux. I've chmodded the files with an a+x on my machine and I even setuid/setgid on the suggestion of someone from the Atari Jaguar forums. That archive has the original files with unmodified permissions, by the way.
Anyone have any clue why this isn't working on my Archlinux? Does it work on any of your Archlinux setups either?

Actually come to think of it, back when I was running i686 the files did work the first time I used them, but I did a pacman -Syu shortly afterward and after that they started giving this error about not being able to execute them. It would make sense if the official Archlinux kernel options were changed to exclude this type of binary between my upgrades at that time.

Why won't my movie finish downloading

I have tried to download this movie numerous times and it gets to about 3gb then stops.

Please turn off your caps lock. All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If it doesn't finish downloading then just click Store>Check For Available Downloads
There is no need to keep re-buying it.

TS3297 Why won't my iTunes finish downloading the songs I bought around 6 hours ago?

Does anyone know why my iTunes would just stop downloading music randomly after downloading three songs?

You probably need to use the Microsoft Installer cleanup Utility.
Here is a method for removal, clean up and reinstall:
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Why won't these flash hyperlinks work?

Please check out this page:
http://www.urbanministries.com/index_3.asp
See the rotating flash. I have links in it that pop out after
the image is completely on the screen "Read more" and "Watch the
Trailer." I know Flash has read the links as links because if you
right click on the words, it has "open link in new window" I
thought it was because I had the text as "Static Text." But when I
tried a test and changed one product's frames to Dynamic text, the
links still didn't work.
Any thoughts?
Shari

UMIWebbie wrote:
> Please check out this page:
>
http://www.urbanministries.com/index_3.asp
>
> See the rotating flash. I have links in it that pop out
after the image is
> completely on the screen "Read more" and "Watch the
Trailer." I know Flash
> has read the links as links because if you right click
on the words, it has
> "open link in new window" I thought it was because I had
the text as "Static
> Text." But when I tried a test and changed one product's
frames to Dynamic
> text, the links still didn't work.
>
Hi Shari
My guess is that you used Dynamic Text to make Text Block
link.
Change it to Static and it should be fine.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Why won't my music finish downloading?

On icloud I can download a song but in the downloads window it will get to "proccesing 100%" but than it never ends up in my itnues library! What do I do to fix this? Help!

Hi, gunstockgirl.
Thank you for visiting Apple Support Communities.
If you are experiencing this issue with iTunes on the computer, try closing iTunes and restarting the program. If you are experiencing is the issue on and iOS device, try closing all open applications and power cycling the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

Why won't Flash Professional finish downloading

Two days in a row I've tried installing and downloading Flash Professional, and the download stalls at 42%. It has been stalled at 42% downloaded for six hours now. What's wrong with the tie or the downloader?

ChiMaxx please try solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html to resolve the current behavior you are experiencing in the Creative Cloud Desktop application.
I would also recommend reviewing Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html as it provides a good overview of steps which can be performed to resolve download errors.

Why won't Spotlight ever finish indexing?

Since latest Software Update, Spotlight seems to be forever in the process of indexing, but it can't seem to get it done.
This is what System.log has to say about it: (over and over and over again)
Jul 28 12:54:06 (Host-Names)-MacBook mds[43]: (/Users/(Username)/.Spotlight-V100/Store-V1/Stores/32ED1B9A-EEC2-455E-A306-7DF5 D3B4B317)(Error) IndexSDB in si_writeBackDBO:Error 22 storing dbo(b673d,430,75,4a924d9ddc80e,0,3741c,30)
Does anybody know what's wrong, and, more to the point, how to fix it?

Thanks, but it doesn't seem to be working.
I started by verifying the startup volume. Then I ran "Repair Disk permissions. Then I tried what it says in Spotlight: How to re-index folders or volumes...twice.
First it did this:
Jul 28 14:28:31 (Host-Names)-MacBook mds[43]: (Normal) DiskStore: Creating index for / which looked pretty good, but then it almost immediately did this:
Jul 28 14:28:33 (Host-Names)-MacBook mds[43]: (/Users/(Username)/.Spotlight-V100/Store-V1/Stores/32ED1B9A-EEC2-455E-A306-7DF5 D3B4B317)(Error) IndexSDB in si_writeBackDBO:Error 22 storing dbo(b673d,430,75,4a9262ba3b5fa,0,374ea,30) which looks to me like it's right back where it started.

Why won't movie trailer files open in Quicktime

Each time I try to open a movie trailer file in my Quick time pro I see a down load window with a small X box at the top left hand of the window.
Why won't these files open. When I go to the same files in Itune Store I have no difficulty downloading and playing

I had a similar problem a few weeks ago, but nobody gave me a reply. I don't know if it helps in your case, but I eventually found out it was my firewall blocking the download.
I could view SD trailers but not the HD ones for some reason.

Task Scheduler Won't Run Task With Idle Condition

When I schedule a task to run Disk Cleanup with a one minute idle condition the task does does not run successfully and provides the following run result.
The Task Scheduler service has asked the task to run. (0x41325)
If I manually run the task or remove the idle condition the task runs and completes successfully.
Why won't the task start with an idle condition?

Hi,
I noticed that you set the idle time shorter than the waiting for idle time. In my opinion, we should set the idle time longer than the waiting for idle time if we schedule a task running during the idle contidion. As the documents described, the Task Scheduler service will verify that the computer is in an idle state every 15 minutes. If a task is set to start only if the computer is idle for 30 minutes, and the task waits for the computer to be idle for 10 minutes, then the task will launch in 5 minutes only if the computer has been idle for 25 minutes prior to the time the trigger was activated. The task will not start if the computer enters an idle state 5 minutes after the trigger is activated. For more information, please refer to Task Idle Conditions.
Best Regards
Dale

Why won't JavaFX programs run?

I'm running Ubuntu 10.04 and firefox. If I go to http://javafx.com/samples/ and try to launch one of the samples I get redirected to a page that says I need a newer version of java.
If I run java -version from the command line I get:
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Server VM (build 16.3-b01, mixed mode)
This is the same version as the one the web page wants me to download. Why won't these demos launch?
thanks,
William
Edited by: wwuster on Jun 16, 2010 7:13 AM

Generally, there are some additional steps to configure the sun java plugin for firefox browsers on Unix systems
http://java.com/en/download/help/linux_install.xml. Scroll down to the firefox section to get a sense of how to do it.
A quick and fast solution (without configuration) to see the demos is to click on the launch button above each demo sample and then open it with javaws (from the bin directory of your java installation). Hope this helps!
-Dhruva
Edited by: d2j on Jun 16, 2010 10:29 PM

Why won't iCloud Drive stop "Upgrading" on my iPod Touch 5? It has never finished...in months. This is how it has stayed since trying to upgrade.

Why won't iCloud Drive stop "Upgrading" on my iPod Touch 5? It has never finished...in months. This is how it has stayed since trying to upgrade.

Try backing up and restoring from backup

Why won't these tasks finish

Similar Messages

Maybe you are looking for