Why won't this iPhone work with this SIM??

I recently sold my iPhone 3GS on eBay after getting my iPhone 4. Before I shipped it, I took out the SIM, and wiped it of its data. I shipped it out, and now the buyer is telling me that he cannot activate it with his SIM card or service. He says he has the data plan etc. I didn't unlock it or anything... All I did was take out the SIM, wipe it, then ship it. What are some possible reasons he cannot use it with his service? (which is AT&T)

DaVBMan wrote:
Lyle Bienstock wrote:
I'm not sure... can't you just use your old SIM if it has a data plan already on it?
No, the SIM is sorta unique for the iPhone. He has to tell AT&T he has an iPhone, they will give him new SIM for it. That SIM will work in iPhone (or other phones). But you cannot put a SIM from another phone into an iPhone.
Sorry, but you are mistaken.
The iPhone 2G, 3G, and 3GS all use a standard SIM. That is what we are discussing here.
The iPhone 4 has a microSIM. That is not the OP's issue.
ANY SIM from any AT&T phone (excluding iPhone 4) will fit into the iPhone and work with it as long as it's a 3G SIM, it should have the 3G fireball logo on it. If it is not a 3G SIM, then the purchaser can go to any AT&T corp store and they will generally give the user a new SIM free of charge.

Similar Messages

  • Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Hello Jesslb23,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    To resolve issues with sending and receiving iMessages, follow these steps first
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
    Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
    iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you are still unable to send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Verify that the contact you are attempting to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    Best of luck,
    Mario

  • Why won't my iphone work on my docking stations, Why won't my iphone work on my docking stations

    Why won't my iphone work in any of my docking stations

    Possibly they are not designed to work with iPhones.
    Possibly there is no physical connection or way to connect them.
    Possibly the docking stations are broken.
    Possibly the device is damaged.
    Without more details of the problem, it's difficult at the least to offer an answer or a possible resolution.

  • Why won't firefox 9 work with Zonealarm?

    Why won't firefox 9 work with Zonealarm?

    You got a reply in your earlier thread here: https://support.mozilla.org/en-US/questions/910967

  • I have an Apple 10.5.8 and just purchased a Canon MX726 printer to use with my computer but I get a message saying the software is not supported.  My computer skills are fairly modest; is an attempt to make this printer work with this computer doomed?

    I have an Apple using Mac OS X10.5.8 and just purchased a Canon MX726 printer to use with my computer but I get a message saying the software is not supported.  My computer skills are fairly modest; is an attempt to make this printer work with this computer doomed?

    10.8 if you must, but on the link above...
    Canon PIXMA MX726 drivers for OS X 10.6/10.7/10.8/10.9
    MX720 series Scanner Driver Ver. 19.1.0 OS X 10.6/10.7/10.8/10.9
    26.75 MB
    Download
    ICA Driver Ver. 3.1.0 (OS X 10.6/10.7/10.8/10.9)
    3.44 MB
    Download
    Quick Menu Ver. 2.2.0
    2.31 MB
    Download
    Canon IJ Network Tool Ver. 4.2.0 for Intel Mac (OS X 10.5/10.6/10.7/10.8/10.9)
    4.38 MB
    Download
    My Image Garden Ver. 2.0.1
    290.88 MB
    Download
    Easy-PhotoPrint EX Ver. 4.5.0 (OS X 10.7/10.8/10.9)
    102.19 MB
    Download
    MX720 series CUPS Printer Driver Ver. 10.84.1.0 (OS X 10.7/10.8/10.9)
    13.76 MB
    Download
    Speed Dial Utility Ver. 1.3.0 (OS X 10.6/10.7/10.8/10.9)

  • HT4972 Why won't my iPhone 4 recognize my sim card after update?

    Why won't my iPhone 4 recognize my sim card after update?
    I updated my iPhone 4 over wifi and it went through the process fine, until it switched back on and now refusese to recognize my sim card!
    Any ideas?

    Usually this means the phone was previously jailbroken or hacked to unlock it from the carrier it was locked to, and the update re-locked it to that carrier.

  • Why won't music match work with my Sonos system now?

    I updated my iTunes to music match, because I added a new computer for my wife and she wanted easy access the music library.  I used the music match and the iCloud to make it easier to get the music on the new computer.  It was fairly simple to set it up, however, when I installed the sonos controller on the new computer, it couldn't find the music library.  Why won't my sonos work, when I can see the music on iTunes in its library.

    Maybe the speakers are not compatible with your computer.  Contact the manufacturer.
    You can try Resetting your Mac's PRAM and NVRAM to see if that resolves the issue.

  • Why won't my Mac work with a Canon i860 Printer?

    I think it used to work, but I haven't used this printer in a while. I remember buying a cord from the Apple store for it, but I just keep getting a #306 message to check connections and make sure everything is powered on. Everything seems to be set correctly, so why won't it work? Any ideas?

    Contact Canon or post in their forum area.

  • Why won't Boot Camp work with 17" MBP??

    Hey guys, I saw a thread earlier yesterday about this and didn't think much of it, however now that I'm trying to install the boot camp driver disk once windows is installed I keep getting that "this software is not compatible with this hardware" message and the drivers won't install!! Does anyone know a workaround on this yet? I hope apple addresses this soon because I need to get at some windows files soon. Has anyone found a solution to why the driver disk that boot camp makes won't install when you're on windows? Thanks.

    I would assume because those drivers are made specifically for the 15'' MBP.
    I believe it uses drivers for the trackpad, etc....which are probably different on the 17''.
    Lastly, I would assume that while boot camp is awesome, it might not be on the top of apple's priority list. Problems with "new released 17'' MBP's" are probably higher on the totem pole.
    Just my .02

  • Why won't 'Speakable Items' Work with USB Audio Input Device (Lexicon Lambda)?

    I am new to Apple Macs, yay for me!
    I really want to use the 'Speakable Items' feature but unfortunately it just won't work with my Lexicon Lambda external USB Audio device.
    Now, the Lambda is plugged in and working, and I know this from using the "Diction' feature which works perfectly.
    When I go to System Preferences and click on accessibility>'Speakable items' and I turn on speakable items, I notice that under 'microphone' I'm unable to calibrate the microphone for some reason (if that's at all relevant).
    I follow the instructions and have been asking 'what time is it?' and nothing happens
    Any ideas?

    I'm having the same problem, using 10.8.4. I have been using Speakable Items for a long time, but it's not reacting at all anymore. I'm on a Mac Mini and have tried several inputs, that all work with dictation, and are selectable inputs for Speakable Items. Zoom H4N, Apogee Duet and an UAD Apollo. The only problem I can see, aside from something in the OS, would be that I have SoundFlower and WavTap installed. Will try uninstalling them, to see if that helps.

  • To The Above Post: Will this CPU work with this MOBO.....

     Just a FYI the Link for the CPU compatibility checker 404s when I click on it.

    he means that sticky topic "Will this CPU work on my board?" ==>  "https://forum-en.msi.com/index.php?topic=129204.0"
    some of the links there are invalid
    EDIT: I've corrected them

  • Why won't Firefox 5 work with Mail Chimp?

    Why doesn't Firefox 5.x work with MailChimp. Edit screens and tools in MailChimp worked fine in Firefox 4.x, but not in Firefox 5.x. In Firefox file, the "edit" screens for the MailChimp email editor display blank pages with no tool bars. Have to go back to Internet Explorer 9.x or Google Chrome in order to edit in Mail Chimp.

    See http://kb.mozillazine.org/Firewalls there a special
    section within for Zone Alarm.

  • Why won't my music work with iOS7?

    I recently imported Now 87 Disc 1 onto my iPhone 4S with iOS7.1. I imported the music onto my PC with iTunes 11 and put it onto my iPhone with CopyTrans Manager v1.002. I opened the Music app on my iPhone and when I opened Now 87 [Disc 1] not only was the artwork missing but I found that the tracks names were grey and next to each of them there was a red circle with a red square inside of it. When I tried to play the album it skipped all the tracks. Just to be clear, the music is from a CD. I bought it a couple of days ago and when listening to it on my stereo didn't experience any issues at all. I also had enough storage to fit the album in there.
    Thank you for listening to my iPhone/iOS 7.1 troubles.
    Yours sincerely,
    bex1377.
    Good day.

    Hi bex,
    You should post your issue to the CopyTransManager support site. It is not an app from the App store, so we wouldn't be able to help you.
    Cheers,
    GB

  • Why won't Time Machine work with MouseKeys?

    Why won't Time Machine respond to MouseKeys?

    What format did you format the drive in?  It should be Mac OS Extended (Journaled).  If it isn't, try that and see if it fixes the problem.  If it's already in that format I don't have any other ideas.

  • Did the iphone works with egyptian sim card in egypt inspite of purchased from usa, did the iphone works in egypt dispite of purchased from usa

    dose the iphone work in egypt with egyptian sim card inspite of it purchased from usa

    If the iPhone is officially unlocked, then it should work with any compatible carrier anywhere. You will not get any support from Apple in Egypt for a US-sold iPhone, though.
    Regards.

Maybe you are looking for

  • Item Interest Calculation for partially cleared items

    Hi We need to do interest calculation on Customer Line Items. The T Code we are using is FINT. We have set an interest indicator for Item Interest Calculation, with Interest Calculation based on Items Cleared with Payments. The requirement is that In

  • Why is Firefox not recognized as a modern brower?

    Whenever I log on to most sites (gmail, youtube, google news, etc) I get a message telling me that my browser is not supported and I need to upgrade to a modern browser. I am running Windows 7 and the browser is Firefox 8. I have reintalled FF8 after

  • GW Interface Questions

    We are looking for direction regarding communicating with Groupwise 7 for the purpose of generating 'Tasks', 'Alerts' and E-mail messages to individuals and groups. It has been suggested that communicating with the Groupwise Gateway API or SOAP would

  • Can't open an FCE project in FCP

    I got FCE 4.0.1 and have now upgraded to FCP 6.0.1. When I try to open my existing FCE project in FCP, I get a message that says, " File's format is too new for this version of application." I just bought the FCS, so I assume it's the latest version

  • IPod running VERY slow. Question!

    Dropped my iPod and now it takes forever to play a song I select. (120gb iPod Classic) - What could this be? I've dropped it before (I have a case) And it's like my computer doesn't recognize it anymore, but it says connected. It takes FOREVER and I