Why won't voice generated text not display as I speak?

Why won't voice generated text not display on the screen as I speak?

All you get in 10.6.5 is spoken COMMAND recognition.
Dictation requires 10.8 Mountain Lion or later:
Mac Basics: Dictation lets you speak text instead of typing

Similar Messages

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

Why the SQL Monitor report do not display?

Why the SQL Monitor report do not display?
SQL> set serveroutput on
SQL> variable my_rept CLOB;
SQL> BEGIN
2 :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
3 END;
4 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.93
SQL> print :my_rept
MY_REPT
SQL Monitoring Report
SQL>

You can you hint /*+MONITOR*/, and then use this procedure to display the monitor report:
SQL> select /*+ monitor */ *from hr.employees where salary>10000;
SQL> variable my_rept CLOB;
SQL> BEGIN
2 :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
3 END;
4 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:01.21
SQL> print :my_rept
MY_REPT
SQL Monitoring Report
SQL Text
select /*+ monitor */ *from hr.employees where salary>10000
Global Information
Status              : DONE (ALL ROWS)
Instance ID         : 1
Session ID          : 170
MY_REPT
SQL ID              : 4tj5p5m6qrkmp
SQL Execution ID    : 16777216
Plan Hash Value     : 1445457117
Execution Started   : 04/30/2010 10:51:23
First Refresh Time : 04/30/2010 10:51:23
Last Refresh Time   : 04/30/2010 10:51:23
| Elapsed | Other   | Fetch | Buffer |
| Time(s) | Waits(s) | Calls | Gets |
...

Why does Safari 5.1.7 not display pdf files anymore?

Why does Safari 5.1.7 not display pdf files anymore? Please fix!

I have this problem too except I see the pdf but it does not print.

Does anybody know why in system preferences Quicktime is not displayed

Does anyone know why in Systems Preferences Quicktime is not displayed? thanks

There is no QuickTime System Preference pane in Snoow Leopard or Lion.

Why does Email text not display, only the header?

When opening an email message, the text or graphics if applicable does not display. The messages display in my Inbox along with the Preview Pane, but when opened the text box is blank. Why?

Close out of the mail app, then double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

PO Material text not displayed in PO

Hi All,
Please help me in finding a solution for my issue,
We use SAP ERP 6.0, and recently upgraded from SRM 4.0 to SRM 7.0. whenever a PO is processed in SRM and replicated to SAP, "Item text" inputs entered in SRM is replicated to "Material PO Text" in SAP and when the PO is printed, those inputs are not displayed in the PO..
However if I amend the same PO again in SRM (by just modifying the inputs in "Item text") and re-replicate to SAP and reprint the PO, the inputs are displayed in PO this time. becoz of this, we had to amend every PO again to have the Item text displayed in PO.
Why the inputs are not displayed in PO at the first time and what made the system to display it after i amend the PO the second time???
Any help is much appreciated.
Thanks
Vinoth

Nabheet, Thanks for your response.
I have already raised this with the tech team and they said they antcipate this to be fixed by this March. I have no idea if this takes so long to fix it. Since we had to process 100s of POs every day, it is affecting our SLA badly
Vinoth

Preview and Generate view not displaying the same as design view

RoboHelp HTML Ver 8.0.2.208.
Hi all,
I have a topic that will not generate or preview what is displayed in the design view.
The topic is a table that uses a different image as the background for each cell (from the CSS).
The background images display fine in design view but will not display when previewed or generated. Everything else is displayed but not the backgrounds.
Any ideas.
Thanks
Wowronin

You have this -
</head>
<script>

</script>
<style type="text/css">
#preloader {
     position: absolute;
     top: 0;
     left: 0;
     right: 0;
     bottom: 0;
     background-color: #fefefe;
     z-index: 99;
    height: 100%;
#status {
     width: 200px;
     height: 200px;
     position: absolute;
     left: 50%;
     top: 50%;
     background-image: url(ajax-loader.gif);
     background-repeat: no-repeat;
     background-position: center;
     margin: -100px 0 0 -100px;
</style>
<body>
In other words, you have a script block AND a CSS block between </head> and <body>. That's invalid code. Move it to where it belongs inside the <head> region. You could have found this in an instant by checking the page here - http://validator.w3.org.

Why won't the Thunderbolt port (Mini Display) on a 2011 MacBook Pro drive a DVI Display?

I'm trying to use a MonoPrice 5106 Mini Display to DVI adapter and a DVI cable to drive an Acer H233H 23" HD display. I'm driving it from the Thunderbolt Port (Mini Display) on a 2011 MacBook Pro. It doesn't work. I use a similar MonoPrice adapter (5311) to drive the HDMI input on this monitor from the Thunderbolt port and it works fine.
I can drive the DVI input on the Acer display from an older iMac using a MonoPrice 4851 Mini-DVI to DVI adapter and this same DVI cable and it works just fine.
So, why won't it work from the MacBook Pro? Do I need the much more expensive Monoprice 6904 dual link DVI adapter ($69)? Why isn't this mentioned in the MacBook Pro manual or on the MacBook Pro support page? MonoPrice says this 5106 adapter should work and if not to try the more expensive 6904 adapter. Need a better reason to buy the more expensive adapter.
Help please.
Thanks,
Vee

Just saw your question. Just like it's Apple counterpart, the 5106 is not capable of higher resolutions. You should, in theory, be able to drive your Acer display at lower resolutions with the 5106. And the 5106 may be sufficient for a 23" monitor . . . you'd need to check the maximum resolution for each.
But you definitely do need the 6904 for higher resolutions. That's what 30" monitors and other high-res displays require.

Voice to text not working since iOS7

Is anyone else having issues since the update? My voice to text option isn't working at all. All I get after I speak is that blue spinning circle. I'm so frustrated. I use this all the time. Can't figure out how to fix it. Any advice? Thanks!

I got this information from an Apple Support tech and it fixed the problem.
1) Tap Settings > General > Restrictions to make sure no restrictions have been enabled.
2) Tap Settings > General > Siri and disable Siri. Then, press and hold both the top and front buttons for 15 seconds or until you see the Apple logo. The iPhone should restart
3) Go back to Settings > General > Siri and re-enable it before testing.
4) Try voice to text and see if it's working. If it is, you're good to go. If not, go to Step 5.
5) Confirm that Siri is set to the language you speak most comfortably by tapping Settings > General > Siri > Language. If not, set it to the appropriate language and try voice to text again. If it works, great! If not, go to Step 6.
6) Tap Settings > General > Keyboards and make sure the keyboard you see listed there matches what we’ve got for Siri. Test again; if voice to text doesn't work, go to Step 7.
7) Reset your iPhone’s “General” Settings by tapping Settings > General > Reset > Reset all Settings. This won’t remove any content, but will reload all Settings to default, including stuff like your wallpaper. Your iPhone should restart. Make sure Siri is enabled before testing again.

Arabic text not displaying correctly in Win Server 2008 R2

Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..

Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang

Info Record Text and Material Text not displayed in Subcon. PO printout

Hi,
I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
Also the Info record text for standard Purchase order is displayed in Print preview and Print output.
The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
I have checked the config for copying rule, for Info record text is automatically adopt.
I am unable to identify the missing config for this.
Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
Please let me have your inptus,
Regards, Muthuvel

The solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
->Text for Messages->Define Text for Purchase Order.
Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message.

Text not displaying on components

I have one swf file where im using the default textInput and
button components. Just so the user can enter a zip code and click
submit. When i publish that swf, everything looks fine. The problem
is that i am loading that swf into a master swf and when i view it
through the master swf, it displays the components without text.
The submit button is blank, it should say 'submit' on it, and no
characters display when you type into the textInput component. I am
able to type characters and submit the form, but i can't see what
im typing. I've tried messing with embedding fonts in the child swf
as well as the master to no avail. If anyone has any suggestions,
they would be greatly appreciated.

Here's how to talk to your dynamic text box. Where you put
this bit depends
on how you are building the preloader, but since you say the
progress bar
works fine, I'll assume you know what you're doing there and
will be able to
get this in the right spot.
// variable that calculates a number for the percent loaded
preloaded = Math.floor((loadedBytes/totalBytes)*100);
// this line is talking to a dynamic text box named
"percentage_txt" that is
inside a movieClip named "preloader_mc" on the root timeline
// depending on your setup the path may be different, but
make sure
everything on the way to the text box is named
_root.preloader_mc.percentage_txt.text = preloaded + "%";
// You've probably left out the ".text = " bit. Just a guess,
but that's
the bit I always find
// I've left out when I'm having trouble with dynamic text.
// Also make sure your text color is not set to the same
color as your
background. Duh.
Good luck.
--KB
"patbegg" <[email protected]> wrote in
message
news:ejuu12$bmd$[email protected]..
> Hi,
> Cheeky little problem. I cannot get the dynamix text to
show on the
> preloader
> of a loaded movie. I am calling in a .swf which has a
preloader in it, the
> progress bar is fine but the text showing the percent
will not display.
>
> I have tried the _lockroot method, but no joy. Any ideas
anyone?
>
> Any help appreciated guys.
>
> Cheers,
> Pat
>

TextArea text not displayed correctly with ImageSnapshot

I am having an issue with the ImageSnapshot.captureImage command capturing the text in a TextArea. Attached are two files illustrating the issue. The "screenshot.jpg" pic shows how the TextArea controls are displayed on the screen. The "created jpg.jpg" pic shows how the text is displayed in the jpg that is created. Below is the code that creates the snapshot, everything is pretty standard there as far as I can tell. The text is obviously not sized the same from one to the other. Any ideas whats going on here or what I can do to correct it?
var myencoder:JPEGEncoder = new JPEGEncoder(50);
var imgss:ImageSnapshot = ImageSnapshot.captureImage(viewstack.selectedChild, 100, myencoder);
var fs:FileStream = new FileStream();
var ssfile:File = File.applicationStorageDirectory.resolvePath("ProjectImages/snapshot.jpg");
fs.open(ssfile, FileMode.WRITE);
fs.writeBytes(imgss.data, 0, imgss.data.length);
fs.close();
Thanks,
Scott

Scott,
Can you file a bug? http://bugs.adobe.com/flex
Thanks,
Jason

Why won't voice generated text not display as I speak?

Similar Messages

Maybe you are looking for