Why won't windows xp disk check complete until firefox cache is cleared?

Windows disk check with the fix unchecked is handy to use as a quick way to verify the disk is ok without a restart. Some time back, it started always stopping in phase 2 (index verification) with the "windows cannot complete the disk check". Running it with the fix box checked (which of course requires a restart) it ran. But I got the same result immediately after running the repair.I had set the problem aside but today started googling the problem and found a site where someone discovered that clearing the Firefox cache fixed this. Well, that seemed pretty stupid and unlikely to me, but I figure I had little to lose but time.
Well what do you know? Clearing the Firefox cache allowed the check to complete properly!
Question: Why is this? This implies that something of Firefox is running even when Firefox is not "running". Are we locking sectors somehow? Is the cache marked in some way that stops the disk check? Inquiring mind(s) want to know!
Version=34
Chris

Does this also happen when you boot Windows in Safe Mode in case other software keeps a handle on that folder?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Similar Messages

  • HT2801 Why won't Windows 7 recognize the super drive?

    Why won't windows 7 recognize the super drive?  I have set up and it was working yesterday.  I added a usb hup and a HDMI - Vga adapter to run two moniters?  When I booted everything up again I found out that windows would not reconize the super drive.  When I an running OS X, I have know issues.

    You tried everything here:
    iOS: Device not recognized in iTunes for Windows
    including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    What does diagnostics show?
    iTunes for Windows: Gathering and using iTunes Diagnostics

  • How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated

    Hello,
    How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.

    In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
    ''troyable7 [[#question-1058550|said]]''
    <blockquote>
    Hello,
    How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
    </blockquote>
    In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you

  • Windows 7 disk check

    I've installed Arch with GRUB on the MBR twice now, and each time Windows 7 wants to do a disk check EVERY TIME it starts.
    Wouldn't be so bad, but for some reason, the system stops responding and seems to freeze if it starts.  So usually I'd just cancel... but now I can't even do that!  It freezes if I try to skip.
    This has occurred on an RC and now my RTM versions of Win7.  That's two installations of Arch, Win7, AND GRUB.
    Here is its GRUB entry
    title Windows
    rootnoverify (hd0,0)
    makeactive
    chainloader +1
    I know it proabably isn't Arch's fault but this is something I have not experienced with other distos, and as of now I can't even get back into Windows.

    This is actually a problem with windows 7... I read up online that with 7 if it does a chkdsk on a secondary drive it will consume ALL available memory and lock up.. apparantly it also does it with secondary partitions on the same drive. Canceling it also causes it to lock up. You may need to disable chkdsk upon boot up (dunno how youd do that) so it wont do it.. ever.

  • HT4840 Boot camp does not boot to Windows 7 disk after completing disk partition - white blank screen

    After completing the partitionning of the hard disk, the iMac reboots but nothing happens. The system does not boot from the Windows 7 disk.
    A blank screen appears and that's all.
    I have tried to manually boot from the disk by pressing the <Alt> kei will restarting the iMac. The system display the option of booting from the iMac hard disk or the Windows 7 disk. Seelcting the Windows 7 option does noting.
    Thanks in helping me find a solution to my boot problem.
    Danarc54

    Are using a 64 bit version or a 32 bit version of Windows?
    I'm not up on the iMacs but according to this article you may not be able to use 64bit Windows.

  • Why won't Links open from e-mail if Firefox is default browser

    I still have this problem and now it is starting to affect the browsers functionality and useability. When Firefox is my default browser any link outside of Firefox (like in my e-mail) won't open which is becoming a nuisance. I am running Windows 7 which may be the cause of the problem via a setting but I can't locate the needle in the haystack or it may have happened at a Firefox update. Firefox has been my favorite and only browser since Netscape 1.0 but if I can't resolve this problem I will have to switch to another which I really don't want to do. Help!!!

    Thanks for your solution jsher. After updating firefox my links stopped working. I checked all settings and associations but nothing fixed the problem. I had to go into Firefox, options, advanced, and use "check now" that firefox is the default browser. Fixed problem and I can carry on using firefox.

  • Why have ad windows, identified as being generated by Firefox, become so frequent and intrusive?

    Specifically: Ad windows (saying they are generated by Firefox) have increased to the point of being way too intrusive. They have started to become unbearingly annoying for about a month, give or take a week... or so. (obviously I have no idea how long but they have become really frequent and intrusive "lately.") Example is the TV Guide page. Say it's up and running and I go over and change the time/day schedule. When I click on "Go" I won't get the schedule, the Firefox ad window is the only page that opens. When this happens frequently on this and other pages, it has become intrusive and annoying and could possibly lead to checking out other browsers.
    I understand you guys and ladies are all volunteers and donate your considerable talents for the right reasons. This will always make me hesitant to change browsers. Thank you for your efforts. (but is there a way you can make the ads less in-your-face? )

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    *http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Why won't Windows 7 permit my CC programs to be the default programs for file types?

    I just uninstalled all of my CS6programs to free up disk space. But now....Windows 7 will not associate JPG, JPEG, GIF, TIFF, INDD, etc. (the typical file types) with my CC programs, -- all of the file types which had previously been associated with my CS6 programs!! Don't misunderstand: I can open the actual file(s) just fine from within the programs themselves, but if I am browsing through my folders, and select a file and try to open from Windows Explorer, it has now been associated with Windows Photo Viewer. And when I try to manually associate the file types with my CC programs, not only are the programs not amongst the choices, Photoshop and InDesign won't remain as my chosen program when I browse through to fine the EXE file!! This is NOT good. This is going to seriously eat into the efficiency of my work flow.

    Windows only stores a file type connection for one application. It sounds like your installation of the CC apps didn't update the file type to themselves so when you uninstalled your CS6 apps, Windows just disconnected the association of the file types completely.
    What you'll need to do is either reinstall the CC apps to make the connection again or you can manually reassign the file types to the associated program. Watching the video here, http://windows.microsoft.com/en-us/windows7/change-which-programs-windows-uses-by-default, will show you how to change the file associations.

  • When is a reset not a reset? And why won't Windows or Itunes see my Ipod???

    I'm having problems with my brand new 5G 60GB Ipod, lovely little beast it is. For th first few days all has been perfect with the exception of album artwork not transferring from Itunes to the Ipod, I've done this manually, what a chore but the results are worth it with 4000 songs.
    Now Windows can't see the Ipod, nor can Itunes This seems to be happening since I ran the inbuilt Ipod diagnostics, a good idea according to a forum I read...AND when ejecting the Ipod using the Windows system tray thingy, it can take 5 minutes, and even then after physically disconnecting the Ipod, it is frozen on the "Do Not Disconnect" screen, and needs resetting. hence my Thread topic:
    I noticed that following the typical reset instruction, if you take your fingers off the buttons as described, then it appears to do a "soft" reset, as soon as the Apple Ico appears. BUT...if you keep holding down the buttons for say another 5 or so seconds it appears to do a "Hard" reset, the screen goes totally blank and you can feel the hard drive immediately spin down. Then it reboots normally. Just for curiosity, and seeing this probably has nothing to do with my Ipod's problem above, and I can't seem to find anything on this anomoly, I was wondering what it all means.
    A bit analous to the difference between restarting your PC, and holding down the power button till it does a hard reset, I guess.
    Any comment or assistance on my problem will me much appreciated. I don't want to lose 4 days and 4000 songs if I don't have to!
    Greg

    Can't see your iPod in iTunes or Windows Explorer? Remember these five basic suggestions when you run into a problem with your iPod. If one of the following doesn’t help, read on for solutions to specific problems. If Windows sees the iPod but iTunes 7 does not, then see this article first (http://docs.info.apple.com/article.html?artnum=304434).
    Tip: Check Device Manager first (right-click on My Computer, choose Manage, and then select Device Manager). If no devices appear in the Windows Device Manager, go here (http://docs.info.apple.com/article.html?artnum=302898)
    Before starting, make sure your iPod is fully charged and then toggle the Hold switch on and off.
    Reset, Retry, Restart, Reinstall , Restore
    Go here (http://www.apple.com/support/ipod/five_rs/) to go through the 5 R's of iPod troubleshooting. If you're still experiencing the issue after going through each of the steps, then continue on for more suggestions.
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or Windows Explorer. The most likely causes are listed below—you'll find information for both USB and FireWire (IEEE 1394) iPod connections. Check each one starting from the top of the list to see if that is what's keeping iPod from appearing.
    our computer doesn't meet iPod system requirements
    Make sure that your computer meets the system requirements to use iPod for Windows.
    Your iPod displays an exclamation point folder or sad iPod icon, or doesn't appear in iTunes or My Computer
    If your iPod displays a folder with an exclamation point icon or a sad (unhappy) iPod icon on its screen, or if your iPod doesn't appear in iTunes or My Computer, follow these instructions to resolve the issue. (http://docs.info.apple.com/article.html?artnum=61771)
    Your iPod isn't formatted for Windows
    iPod for Windows Software only recognizes iPod for Windows. You cannot use iPod for Macintosh with a Windows PC. To see which platform your iPod is formatted for, follow these instructions. (http://docs.info.apple.com/article.html?artnum=61672)
    Your iPod isn't connected to a high-power USB port
    If you're connecting an iPod, iPod mini, or iPod shuffle to your Windows computer, make sure that you're connecting it to a high-power USB 2.0 port on your computer (not a low-power one such as the USB port on your keyboard or bus-powered USB hub).
    Typically, USB 2.0 high-power ports are located directly on your computer. Try connecting your iPod to another USB port on the computer (or to a self-powered USB 2.0 hub that's connected to a high-power USB 2.0 port on your computer) if the computer still doesn't recognize your iPod. Alternatively, if your computer has a FireWire connection, try using that instead.
    If you're connecting an iPod, iPod mini, or iPod shuffle to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPod.
    and the answer to yoru question about a hard and soft reset....
    a hard reset is for when your ipod is totally locked up and a soft reset wont work for it. just like if your computer is completely frozen you cant do ctrlaltdel to close all programs and stop messing up your computer...you have to restart the computer by pushing the power button down for like 10 sec. that is the only difference all does the same thing just when a soft reset wont work and your ipod is completely locked up you do a hard reset. good luck hope that helps ya out

  • Why won't windows re-size predictably?

    Why is clicking the green re-size button such a crap shoot in OS-X? Sometimes the window doesn't change size at all (e.g., in iPhoto). Sometimes it gets bigger than necessary to see the contents of the page being viewed (e.g. in Safari). Sometimes it gets ridiculously small! The other day the green button sent my Firefox window into a rectangle about 2 inches wide by 1 inch tall! On a perfectly normal web page! This kind of thing happens in all kindas of applications.
    Even Windows is capable of a mostly predictable behavior when you click on the re-size buton! How hard can it be to make one click send an OS-X window to full screen and the next click to make it about half that size? It would be better if it toggled between just big enough to remove the scroll bar(s) and something about half that size. But almost any predicable behavior would be better than what we get now.
    Am I missing something? For the life of me I can't understand why other Mac users don't complain about this. Why doesn't this come up in the otherwise highly detailed and nit-picking reviews of OS-X that we get from the (excellent) likes of Siracusa?

    I'm taking gumsie's advice and will submit feedback to Apple. I think this is as close to an "answer" as we're going to get on this subject at this time. I will suggest increasing the predictibility and usefulness of the zoom button in the manner I described in my last post. I actually did provide feedback on this issue in 2004 but, obviously, it didn't convince.

  • Why won't Adobe Flash Player download completely onto my new OS X 10.8.3?

    I downloaded the installation app from the Adobe website, and went through the process of choosing how to receive updates and the like. But when the installation itself begins, it gets up to 7% then stops. It stays there for a while, then quits randomly, and there's no error message. I've tried it a couple times, and have downloaded the app from the website a couple times too. I don't understand why it won't work on my new computer.
    I have an OS X 10.8.3
    Processor: 2.9 GHz 1600 MHz DDR3, Intel Core i7

    1. Security turned on?
        System Preferences > Security
        Select App store & identified developers
    2. System Preferences > Flash > Advanced >  Delete  All
      3. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.

  • Why won't Windows 7 recognize Elements 4.0 CD?

    I recently upgraded my pc to Win7...which is fine except that I cannot install PSE 4.0.  I tried using the 'older windows version' feature of Win7, but my pc won't even read the CD!  Any ideas on how to resolve this?

    You tried everything here:
    iOS: Device not recognized in iTunes for Windows
    including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    What does diagnostics show?
    iTunes for Windows: Gathering and using iTunes Diagnostics

  • Why won't Windows XP automatic updates work after installing new ITunes

    After installing the new 11.1 Itunes, Windows automatic updates fail to install any new updates.
    The last time this happened was when I last updated Itunes. I can't remember how I fixed it but I had to go into the apple software and fix something.
    Please help!

    Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync  it kept telling me iTunes is not working. Why ??

  • Why won't Windows 7 install?

    I'm trying to install Windows 7 via Boot Camp from an external optical drive onto a new SSD that I've installed in place of the old optical drive. The drive is recognized by the computer, and is completely empty. I have a disc with the Windows drivers, burned in Boot Camp, and a CD with Windows 7 on it. Everything goes fine until the computer restarts to boot the Windows install disc. When it turns on again, it loads a screen that looks like the normal boot screen with the Apple logo, except it cycles between three icons: the normal Apple logo, a circle with a line through it, and a folder with a question mark. At this point I just have to shut down and try again. I've tried booting while holding down cmd-opt-p-r, which doesn't seem to do much. I've tried deleting the partition that Boot Camp made on the SSD, reformatting the drive to MS-DOS (FAT) and trying the installation that way, nothing quite seems to work. The Windows 7 disc I'm using is brand new straight from Best Buy, so the problem must be the SSD, I think. Any suggestions would be appreciated.

    Got it working, had to go to the start menu and do a search for "Apple Software Update" and update Quicktime - had an old version that wasn't getting updated. Itunes works without problem now.

  • Why won't Windows 8 recognize my nano

    I have a new gen7 nano that is not recognized by my computer.  I am running Windows 8 on my computer.  I uninstalled and then reinstalled itunes and have tried plugging into each of the usb ports in my computer.  My husband was able to open the nano on his computer, but the music I want is on mine!!  Any ideas or suggestions for what to try next?

    Is iTunes saying that an ipod has been detected but could not be identified properly? Or is something a bit different going on?

Maybe you are looking for

  • Video card options question.

    Hello guys, i'm wondering if u can configure your video options like on a PC. I'm using a 15"MPB, when i'm playing WC3 online, it seems so laggy. I'm new to Mac computers, please help out. Thanks in advance!

  • New home and new WIFI sluggishness

    I recently moved in with my girlfriend. At my last location, I quit using wifi, was connected directly via ethernet to my cable internet modem. I was also Airport sharing the connection for my kids' iMac. Now in her new place (and new wifi), I can co

  • Why do I need Pages 5 to open iBooks Author documents?

    I am a TA at a college and I have been grading students' iBook submissions for a class.  However, this week when I went to open their submissions I got the following error message: "You need a newer version of Pages to open this document."  Clicking

  • 16:9 in FCP and DVDSP

    I'm sure this has been asked multiple times and I did try to find my answer there but I just want to ask again... I am needing to create videos in 16:9 aspect ratio. We shot on miniDV with a canon XL2 with 16:9 selected but I'm having troubles figuri

  • Autogenerate Group By, only on demand?

    Hi, I find SQL Developer's "Autogenerate Group By" function very useful. But it can be quite annoying as well, especially when I'm editing an existing query. It would be great if I could create my own code up to a point, and then invoke the "autogene