Why wont camera roll from iphone show up on ipad when restored from iphone?

Why wont camera roll from iphone show up on ipad when restored from iphone? I purchased the ipad and when I went to set it up I chose restore from iPhone. All the apps transferred and the photos in the stream but not the camera roll. When I restored a new iPhone the camera roll transferred.
is there a way to get camera roll on ipad?
Thanks

Camera Roll photos from an iPhone backup will not be transferred to an iPad. iPhone to iPhone will transfer the Camera Roll, but iPhone to iPad, or iPad to iPhone will not transfer the Camera Roll.
Cheers,
GB

Similar Messages

  • Camera roll empty but shows 6.1 gb.  Restored to original settings after backing up.  When I restored the backup camera roll still shows 6.1 gb and is till empty.  I imagine that the backup contains some corruption

    Camera roll empty but shows 6.1 gb.  Restored to original settings after backing up.  When I restored the backup camera roll still shows 6.1 gb and is still empty.  I imagine that the backup contains some corruption

    Hi cfgolf,
    Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/ht4137
    2. Transfer content
    Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
    6. Set up as new
    Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
    Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
    Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    If the issue is still present, you may want to contact Apple Support.
    If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
    Cheers,
    -Joe

  • Why does camera roll show last photo taken even though it was trashed ?

    Why does camera roll show last photo taken even though it was sent to trash ?

    http://support.apple.com/kb/HT4486

  • I have a photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere?     Noooooo i just want to delete it from camera roll!!!!!

    I have the same photo in an album and in camera roll. I am trying to delete the photo from the camera rol and the only option that i get is : delete everywhere?     Noooooo i just want to delete it from camera roll!!!!!

    The way that I understand that it works, is that the photos are not copied into the new albums, instead it just points to the photos - the number of photos on the iPad in Settings > General > About doesn't increase when you create new album so I assume from that that it isn't copying the photo, just pointing to it. So if you delete the photo from the camera roll you will therefore also be deleting all the pointers to it

  • Why does camera roll take up all my storage data and how do i get it free for space

    why does camera roll take up all my storage data and how do i get it free for space

    You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on any iOS devices that you have  by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on them
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Why was camera roll removed on iOS 8?

    why was camera roll and photo stream taken off the phone On iOS 8?

    Ask Apple. Noone here knows why.
    feedback
    Pete

  • Why are the only numbers that show up in my "Recents" on the iPhone 3G the calls that I've missed? I used to have all recent numbers that had called, on my old phone.

    Why are the only numbers that show up in my "Recents" on the iPhone 3G the calls that I've missed? I used to have all recent numbers that had called, on my old phone. Is there some way to make it so that all my recent calls (in and out) show up on my phone?

    At the top there's a toggle between "All" and "Missed".  Click "All"

  • TS3694 when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • HT1766 After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music s

    After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music screen?

    Well, it's certainly behaving as though the phone that was backed up was synced to a different iTunes library.
    I'm going to throw one more thing out there... Yes, you backed it up to this computer... Was the phone previously set up to sync with this computer? Or was it syncing with a different computer and you just backed it up to this one?
    You may have to end up setting it up as a new device and rebuilding the phone by manually re-syncing your data, apps, music, etc. to the phone.
    Trying to keep your library on a different drive can be tricky. If iTunes starts up and the library isn't available, it may end up generating a new library ID, meaning that you could easily find yourself in exactly the position you're in now...
    I'm curious why there was a need to restore your phone to begin with... It may not have any bearing on this at all, but it could.

  • Just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    just replaced my iphone 4 with new 4.  restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

    Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

  • Hi i have a question, I'm trying to back up  my iPhone to iTunes but it says restore from backup or setup up as new device. if i setup as new device will everything be deleted? if yes then how would i back it up without anything being deleted

    Hi i have a question, I'm trying to back up  my iPhone to iTunes but it says restore from backup or setup up as new device. if i setup as new device will everything be deleted? if yes then how would i back it up without anything being deleted

    Following is a link to instructions on how to backup (either via iTunes and via iCloud) http://support.apple.com/kb/HT1766

  • Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?

    Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
    Depending on the system version, and Office Word version:
    - a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
    - other kind of links where the text under display is not a URL, never work!
    I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
    I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
    This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!

    Greetings NoNameGiven,
    If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
    a ‘C’ student

  • HT1766 i am trying to unlock the iphone 4, after backup, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb availabl

    i am trying to unlock the iphone 4, aftermanual backup on the computer, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb available

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • TS3694 how do you solve a error 1015 when restoring a iphone from recovery mode?

    how do you solve a error 1015 when restoring a iphone from recovery mode?

    This error is generally exhibited when someone tries to downgrade iOS. See this support document http://support.apple.com/kb/TS3694
    This is the part you are looking for.
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported. 
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • TS3694 i have show the error 1015 while restore the iPhone 3g

    i have show the error 1015 while restore the iPhone 3g

    The phone was jailbroken. You can't get help here. Discussing jailbroken phones is forbidden by the terms of service.

Maybe you are looking for

  • The case of the unbootable Macbook Air running Lion

    I upgraded to Lion without issue on release day. This is a previous gen Macbook Air with all options including upgraded processor that ran Snow Leopard with no issues. It's literally a month and a half old. Last night I closed the lid just as the bat

  • How to stop While Loop in Event Structure with same button?

    Hello, I have a problem. I want to use one control to activate an event in a event structure, and the same control to terminate a while loop in that event. It is possible to use 2 controls to do this, but I need it to be only one. Thank you   Message

  • Itunes mixed up my album cover pictures! can't get them correct! HELP!

    I turned on my ipod after i downloaded some songs to it one day and some of the album covers were wrong! i tried putting new pics in but it won't work!

  • How to set indentation in formatter?

    hi, I am working with this grammar (snippet): Entity returns modulob::Entity: (annotations+=Annotation)* (isAbstract?='abstract')? 'entity' name=ID (':' super=[modulob::Entity])?'{' (features+=Feature)* Annotation returns modulob::Annotation: '@' opt

  • I need help with a query

    Hello everyone, First, some background information.  We have in place a table which records status changes on a work order.  The orders normally go through each status only once, however they do occasionally reuse status indicators.  For example, an