Why wont my clips import into Final Cut Pro ?

FCP doesn't work with 3GPP, which is basically a cellphone compression format. FCP only works with media in the QuickTime framework. It only works with video in standard video frame resolutions, which 800x480 isn't, and with video that uses uncompressed audio, while yours is compressed.
Standard definition video is 720x480 at 29.97fps with uncompressed 48k audio in a production codec, which H.264 isn't; it should be either DV or DV50 or ProRes.

Similar Messages

Video quality changes when imported into Final Cut Pro

I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
Current Size: 1,440 × 810 pixels
Will I need to do anything to those as well?
Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

Why is my 60i video pixelated/choppy when imported into Final Cut Pro X?

I just bought a brand new Nikon D5200 to get into some indie film making. I put together a quick short the night I got it (http://www.youtube.com/watch?v=uN8OAprluOI) and filmed in 1080p at 24fps. It turned out great, footage looked great, was ready to test out the 1080 60i they put on it. Again, the footage looked great but only on the camera this time...Every time I go to import it into FCP X it comes up pixelated and choppy but if I'm just watching it in Quicktime its smooth and looks fantastic. Is there anything I can do to get my 60i footage imported into FCP X and stay true to the quality? The codec it's importing on is
h.264 and when it gets into FCP X it switches over to it's true nature of 29.97i so i just don't know what the problem can be!!
HELP PLEASE!!!!
Thanks in advance!

ZacBecker wrote:
It turned out great, footage looked great, was ready to test out the 1080 60i they put on it.
Hey Zach.
How did your progressive footage wind up in an interlaced video? (Who is "they"?)
Typically, one wants to edit as close as possible to what was shot. The cases where progressive needs to be converted to interlaced would typically be where one needed to match delivery requirements in broadcast. The conversion to interlaced is almost certainly going to introduce "issues".
Russ

Importing SWF into Final Cut Pro with no Background

Hi Everyone:
I've created an animated macromedia .swf file and imported
into Final Cut Pro successfully just as an .swf file. I can see the
.swf file animate in Final Cut Pro, the only problem is there is a
white background along with my animation. I've seen many slighly
related threads to this problem, but no end solution or work
around. any help? here's what i've seen in posts and other forums:
- create another layer below your object and place a
tranparent color swatch box the size of your stage size
- export the flash file as .mov with an alpha channel
transparency
- export the flash file as a .mov with an alpha channel, then
open in quicktime pro, then re export again as a quicktime movie
with the "Millions +" option.
- i've also heard something about having the right codecs, or
purchasing some other 3rd part software.
none of these approaches have worked for me. My Dream would
be to just import the .swf file straight into Final Cut Pro. I've
been exporting my flash movies as a png sequence and importing
every image into FCP for the time being. I'm also thinking about
just making the background bright green, because i think i just
chroma key it out, but i'm not sure how clean this will be.
here's the related thread:
http://www.kirupa.com/forum/showthread.php?t=242444
Thanks for any help.

You need one of these: http://desktop.thomsongrassvalley.com/products/videoconversion.php to do it properly. The ADVC 300 is the best option for the money.

MP4 (MPEG-4 MOVIE) FILE IMPORT TO FINAL CUT PRO X

I have some MP4 files I am unable to import into Final Cut Pro X from a Hard Drive. 1920x1080, Codecs: MPEG-4 Video, Linear PCM, Audio Channels: 2 Total Bit Rate: 35,253 ...
Any suggestions as to what steps I need to take to be able to import them into Final Cut Pro X ???

Okay, I fugured it out ... the footage I was provided was from a Sony XDCAM source ... the link below gave the information needed ...
Final Cut Pro X: Importing Sony XDCAM media http://support.apple.com/kb/HT4724
Just follow the instructions ... the sony documentation for the two downloads indicated that this would not work for FCP X ... but it did work fine ...

SWF file wont import into Final Cut

I built TV commercial in Flash and I am trying to import it into Final Cut Pro. I tried editing it in After Effects but when I render it as an avi file it ends up being 1 gig.... I called adobe support but they wont give support, even if you pay them, to use anyone using a trial version of After Effects. Not sure I want to buy it if I cant use Flash and FCP wih it. Either way, if someone can tell me where I can go to figure out how to import this flash animation into Final Cut Pro that would great! In fact, if it is that complicated, I will pay someone to do it for me. This commercial needs to be ready for the stations yesterday.
I really hate Apple for making Final Cut Pro so difficult to work cohesively with Windows software.

You can't. Apple ceased support on their Quicktime Flash componet several years ago. Converting it an Adobe program or exporting it as a image sequence or clip from the flash authoring environment are the only serious options. Still, even that is bound to rules liek not producing correct results with scripts and things that require user interaction. if that is the case and you are running out of time, play the file in a web browser and do a screen capture. Not glorious, but assuming the machine is fast enough and the SWF has been authored properly with video use in mind (size and framerate), might produce a usable movie...
Mylenium

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to import unix executable files into Final Cut Pro

A friend wanted me to create a Halo 3 Montage Video for him. He loaded the saved clips onto a flash drive for me but when I put it into my computer the information comes up as Unix Executable Files and I don't know how to import them into Final Cut Pro 7.0.2 or if it's even possible. Any help would be much appreciated. Thanks.

Ok. Well, I plug in the flash drive. When it opens there's a folder that says XBox360. When I click on the folder there are 9 files listed that say Data0000, Data0001 etc. The preview option shows a gray folder that says Exec on it and the only information I can find is that it's a Unix Executable File. When I click on more info option everything that pops up is what I've already told you. I tried opening it in the VLC Player but nothing played which makes me think there aren't video files on the flash drive. When I click on the file to open it the Terminal Program appears and lists basic information about the file.
Is there a program that can take these files and covert them into something that can run in Final Cut Pro? Or is that what VLC is supposed to do?

How to Import a MPEG-3-ts (Transport Stream) into Final Cut Pro ?

Hello All;
I just bought Final Cut Studio and I am trying to figure out how to import some video footage that I captured using ArcSoft's totalMedia software via a HD HomeRun High Definition TV decoder. I have verified that the video is being saved in MPEG-2 Transport Stream format but I've tried everything but still can't import it into Final Cut Pro. I've purchased the MPEG 2 Quicktime component but then realized that it doesn't work with Transport Streams. Then I downloaded MPEG StreamClip for Mac which does play the clips on a Mac but I need to obtain the codec so I can import them into Final Cut Pro. Any ideas would be hugely appreciated. Thanks. Tim

I do:
"You need to use MPEG Streamclip to convert the files to an editable format, such as those found in Final Cut Pro's Easy Setup menu.
For HD, your best choice is ProRes, DVCPro HD or Apple Intermediate Codec."
And so does Nick.

How to Encoding MPEG Movie to be able to import into Final Cut Express

I have MPEG Movie video clips that were sent to me. Title dvdMovie1chapter26.mpg (21.6MB) given to me from a PC taken on dvd video camera and compiled on CD disk. I would like to edit in Final Cut Express 4.0. I can not import in present form. Have used HandBrake and Toast 8 to encode. Divx and AVI to grainy. Have tried to make QuickTime Movie but 21.6 MB file went to 115.6 GB. Not sure how to set QuickTime options (Formats-Audio-Video Setting) in Toast 8 to encode with good quality this file so I can import into Final Cut Express. I will not have enough disk space to do all the video clips at 110 GBs or more per file. When I drag this file into Toast 8 with DVD-Video selected the file come into Toast as a Video-MPEG-2 720x480 29.97fps and Audio- Dolby Digital, Stereo 48000Hz File. Any Ideas?

How long is the movie? DV is 3.6MB/second. Handbrake is no good for this. I don't know if Toast will do it, but you can try MPEG Streamclip. You want to export to QuickTime using the DV NTSC codec at frame size of 720x480 and 29.97fps.

Audio lost when importing MPEGs into Final Cut Pro

When I import MPEG files into Final Cut Pro 4.5 the audio disappears. When I play the clips in Quicktime the audio and video are present, after I import only the video is present. I have tried adjusting the sequence presets for MPEG, but that has not helped. Any advice? Thanks!!

Hi:
Check this thread:
http://discussions.apple.com/thread.jspa?messageID=4859045#4859045
Alberto

How do I import video and sound files from a hard drive into Final Cut Pro X?

I just installed the lastest upgrade to Final Cut Pro X. I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer?

File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

How do you import raw motion video projects into Final Cut Pro X

How can I take a raw motion video (not a template for a transition, generator, etc.) and import it into final cut pro so I can just put it right into one of my projects.

share, Export Movie, short cut ⌘-E
in FinalCut: Import File

Why wont my clips import into Final Cut Pro ?

Similar Messages

Maybe you are looking for