Why wont my finished movie upload to youtube

why wont my movie upload to youtube it just says its uploading and when its finished i check youtube and its not there!

Have you tried exporting it to a .avi or .mp4 then uploading it? That might work if it doesn't work straight out of iMovie.

Similar Messages

Why won't Quicktime movie upload to YouTube?

I made a Flip-4-Mac video using handheld Flip video device....then uploaded to my iMac as an .avi file. Decided to upload to YouTube but file was nearly 30 minutes long.... so then used the QuickTime Player 10.0 (133) 'trim' feature to divide video into 3 (not quite equal) parts. This left me with 3 separate videos labeled Part 1, Part 2, Part 3. They are .mov files.
Using QuickTime's 'Upload to YouTube' option, I began upload of Part 1. During upload, a message appeared saying audio might not be in sync, and then I got an error message saying upload couldn't be completed.
Anyone have any ideas? Is the VeeScope Converter an option?
-R

Thanks, but the instructions within those links are too over the top for me. Will have to find a techie to help sort it out. Appreciate the links and will print out the info.
Then switch your editing work flow to one that forces recompression of your files for sharing to YouTube. The fact that your current work flow goes from AVI to MOV file containers implies you could be using a "Save as..." operation rather than an H.264/AAC conversion. This means your MOV file main still contain whatever audio and video codecs were used to create the original AVI file. Since you did not tell us what compression formats are involved here, provide a specific work flow, indicate the duration or target display involved, all we can do is make guesses at what problems you may be experiencing and their possible solutions. If you do not understand the instructions as provided by YouTube for optimal uploads, the use an editing app that also shares your edited files directly to YouTube as such apps should export the edited content using compression formats currently compatible with the YouTube web site software.

1st movie uploaded to youtube plays @ double speed

Using a 4-year-old 13" MacBook with iMovie HD 6.0.3 I created a 36-second video which, when uploaded to youtube, has the video playing at double speed but the audio playing normally until the audio gets cut off since the video now has been reduced to 19 seconds in length.
On the youtube help forum I see others who have had a similar problem are being asked for info obtained from a freeware app called MediaInfo which gives all the particulars on codecs, I guess, but that software is not available for Mac.
Afraid I have not kept up to date on movies—am doing this for a friend and have no idea what to do. So far no one has responded to my query on the forum. Any direction would be appreciated.

There aren't any settings in iDVD that would increase or decrease the speed of a video, so you may want to take a look at the Quicktime movie properties to see if it was compressed by cutting the frames per second in half (eg, 15 frames/sec rather than the standard 30 fps).
If the original is 15 fps, you might try running a sample through MPEG Streamclip, iMovie, Quicktime Pro, Roxio Toast... to see if one of those can add frames back into the video so it's the standard 30 fps. I've not encountered this before, so don't fool around with your original and search the archives here and over in the forums associated with the software mentioned.
John

Why wont my PDF files upload to my website?

I have not been able to upload certain PDF files to my website. They upload to my (non-website) e-mail as attachments fine, but not to the wesbite. Other file formats, and very small 'test' PDFS upload fine, but ones over 2MB, whether 'locked' or not, just wont upload. The status bar gets about a tenth of the way across, then I get an error message.
Can anyone offer a solution?

It says "the document has features not supported in this reader" and I haven't been able to open it in literally anything except for on my friend's laptop, nothing on my tablet will open it and there isn't many things I can download on the tablet instead
Date: Mon, 20 Jan 2014 18:06:40 -0800
From: [email protected]
To: [email protected]
Subject: why wont my .pdf files open?
    Re: why wont my .pdf files open?
    created by Rob McAfee in Adobe Reader Touch for Windows 8 - View the full discussion
What error messages are you seeing (if any) when trying to open the PDF file with Adobe Reader Touch?
Have you been able to open that PDF file with other PDF software, e.g. Adobe Reader XI?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6034073#6034073
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6034073#6034073
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6034073#6034073. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Reader Touch for Windows 8 at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why won't Elements 8 upload to youtube?

Last year we made many videos and upload to youtube from Elements 8. Now we've tried to upload some new ones, and the title screen is different, where you type title and description, and when you click upload nothing happens.

This is the one I just tried, a storybook video that is actually comprised of jpeg's we drop in to make the storybook videos: http://www.youtube.com/watch?v=ZpUd2XA6eSU&list=UUK5fkf1q7pG0MWNkR1fr4cQ&index=1
This is our regular youtube channel: http://www.youtube.com/user/tangerineskyvideo
We've uploaded many this way, and it always worked. Now, when we click upload, Premiere freezes, it just doesn't do anything. Most of the TV stations we're involved with are on the Roku, so they should be able to grab the existing youtube videos we have, but one of the stations is a cable station in England and the guy said youtube distorts it, so he had us email some videos via wetransfer.com. So, we saved them as mpeg's and sent a few, but then saw that the ones we saved as mpeg's, directly from Premiere, the sides were cut off. So,we need to be able to figure out how to save them widescreen from Premiere, because then we'd be able to manually upload to youtube.

Why doesn't my iphone upload to youtube anymore

My iPhone 4 used to be able yo upload to youtube. Since I got iCloud I cannot anymore. I get the message:
We see irregularities in the aspect ratio of your uploaded video file. If your upload does not fit well in the video player, read this article for tips.
What's going on?

maybe read the article? this is about youtube not your ios device

Why wont my rented movies move to my apple tv

I have a 1st gen Apple TV and I have three rented movies with 23 remaining days. I want to transfer them to the Apple TV and it wont do it.
I'm in the appleTV tab , rented movies, and I'm clicking the MOVE button, then the SYNC button at the bottom of the screen
I get the spinnign wheel for a moment then it all jumps back to the starting point and never moves the movies.
I have reset the apple tv, made sure the passwords are all up to date on all machines and it just wont work
HELP!

Have you rented in 1080p HD? AppleTV 1 does not support 1080p only SD and 720p.
AC

Why wont my ipad2 play videos from YouTube or Vimeo?

Help is appreciated

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
Apps that can display some Flash from the Web:
Puffin
SkyFire
Photon Flash
Browse2Go
iSwifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

WHy wont firefox play any videos except youtube?

I cant watch videos anywhere but youtube!
== URL of affected sites ==
http://www.hulu.com, comedy central.com

I cannot get BBC,IV or Channel 4,sound or vision.

Why wont my iphone 4 upload photos to iphoto on my Mac? It recognises the phone but no photos come up...

When I plug my iphone 4 phone into my mac book pro (both on latest software updates available) iphoto does not open automatically. When I open it manually it is recognising the iphone OK but not showing any photos at all that I want to import. Any ideas?

To get iPhoto to open automatically when a camera or iPhone is plugged in go to iPhoto's General preference pane and set Connecting Camera Opens to iPhoto:
Give the following fix a try. It's for another similar situation and may work for you:
Robin Johnson
This solved my questionRe: ios update problem - 7.1 11D167 iphoto not picking up new photos
Mar 20, 2014 7:15 AM (in response to JdinPa)
I figured out the fix for the Mac users having this problem. I connected my iPhone to my iMac and started iTunes. A dialogue came up in iTunes, I OK'd that and then OK'd the usual "Do you trust this Mac" that comes up on my iPhone.
Suddenly Image Capture launched itself and there were all my photos, ready to be downloaded.
Alscuzzer33 wrote:
When I plug my iphone 4 phone into my mac book pro (both on latest software updates available) iphoto does not open automatically. When I open it manually it is recognising the iphone OK but not showing any photos at all that I want to import. Any ideas?
You may or may not get the Do you trust message.
OT

HT1338 Why wont my mac finish the software update?

I just bought Snow Leopard for my mac and when it starts to install it only gets to the point where it says "46 minutes remaining" and then the disk stops reading. Its says to carefully clean the disk and I do, so why wont it finish? I just bought the disk and it cant completely read.

Where did you purchase the disc from?
How large is your hard drive and how much hard drive space do you have left?
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer. Try upgrading again. Repair permissions and restart your computer again and post the results.

Why won't final cut pro x upload to youtube?

why wont my video upload to youtube via the share tab?
it goes nearly all the way then just stops, regardelss of if its in SD or HD.
any reason for this? is it because i have the trial version?

what looks like is happening is: FCPX uploads your video direct* to youtube, then it waits while youtube processes your video. Considering FCPX creates extremely high quality h.264 output for youtube (everything, actually), it can take youtube a relatively extraordinary amount of time to process the upload.
If you click on Share Monitor, then turn down the disclosure triangle on your Project ("folder") and click on the circled 'i' to the right of the exporting video, you'll see at the bottom of the pop-out XXXX Video Sharing.mov to YouTube XX% complete (after FCPX hits the ~95% mark). ...Progress is s...l...o...w...
From inspecting the log files, it looks like youtube and fcpx are communicating while youtube finishes processing your video. Testing a vid, I went to my youtube video manager page and sure enough, my upload was listed with a (processing...) on it. There is no graphic representation available of the stage of processing like the normal upload page gives. [Even though YT was indicating that the upload was complete and it was processing - when I cancelled in FCPX (@95% / about 10percent processing on YT's side) - it killed the upload to YT.]
Whether or not an upload succeeds... well that's a whole other kettle of fish. I don't have the patience to wait it out. Besides, I know how to optimize videos for youtube, and FCPX direct is about...oh... 4 to 5 times overkill... in most cases.
*the first thing FCPX does is render the project out in H.264 format before uploading... It does not do that "on the fly".

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

I recorded my video in High Definition. WHY does it upload to Youtube in low quality?

I just bought Premiere 13 hoping it would WORK for me as none of the other versions I bought did. It worked great to edit my video. I then shared it with Youtube, but it uploaded in low definition (360). The video was recorded in High Definition as our my other videos already on Youtube.
What do I do to get my videos to upload to Youtube in High Definition as I recorded them????
Thanks, Frammajoy

Joy
Please explain further.
If you create a Premiere Elements 1920 x 1080 project and you upload it to YouTube with the High Definition for YouTube - 1920 x 1080 preset and, at YouTube,
you set the viewing of the YouTube player to HD, are you saying that the quality is poor? In addition, the YouTube player is a 16:9 player. Are your uploads presenting with black borders when viewed on YouTube when the upload is done using the Premiere Elements YouTube built in feature?
In other words, are you saying that are not being set back by YouTube player automatically setting the viewing for 480p or something lower than that rather than automatically setting for HD 1920 x 1080 viewing?
Your opening thread description seems to say otherwise.
I then shared it with Youtube, but it uploaded in low definition (360). The video was recorded in High Definition as our my other videos already on Youtube.
What do I do to get my videos to upload to Youtube in High Definition as I recorded them????
Again, if you create a 1920 x 1080 project, upload with High Definition for YouTube - 1920 x 1080 preset, then the rest is up to YouTube and its conversion
process.
If that is the case, that is a YouTube preference and not Premiere Elements. This is not Adobe here. Rather user to user. And, I am not affiliated with Adobe in any way. So, my only interest is you and helping you move forward in your Premiere Elements projects user to user based on the details that we exchange.
Please help me to understand why your reply was
It isn't Youtube that is the problem
Thank you.
ATR

HT1351 Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?

Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?

Try here:
iTunes: Error 13019 during sync
Not updating the iOS should not effect your problem.
As long as all the apps are in the iTunes library, you will not lose app data by updating the iOS.

Why wont my finished movie upload to youtube

Similar Messages

Maybe you are looking for