Why wont my firefox homepage open when i open firefox. Ive already checked the settings and everything seems normal

When I open up Firefox the page is blank. I have to click on the tool bar to open it. Never did this before. In general options, it says on start up, "when firefox starts" And I have it set to "show my home page" Page is still blank.

Could you describe in a bit more detail what you mean by clicking on the toolbar to open your home page: are you clicking the Home button, or using reload, or using a bookmark?
Does the same problem occur when you open a new window (Ctrl+n), or only when you use your Firefox desktop icon?
''If the problem is specific to your shortcut on the desktop:''
Check whether the shortcut specifies any command-line parameters. Here's what I mean:
right-click the icon > Properties > Shortcut tab
The "Target" line should be selected. That line should not have any extra stuff after the following:
32-bit Windows:
"C:\Program Files\Mozilla Firefox\firefox.exe"
64-bit Windows:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
If you see extra text after that, clear it out, save your change, and try the shortcut again. Any improvement?

Similar Messages

  • Why is my mail saying "cannot get mail - user name or password for Gmail is incorrect" but on the Gmail app there is no problem.  I have checked the settings and everything seems to be ok

    Why is my mail saying "cannot get mail - user name or password for Gmail is incorrect" but on the Gmail app there is no problem.  I have checked the settings and everything seems to be ok

    Go here and unlock your account... https://www.google.com/accounts/DisplayUnlockCaptcha

  • Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Have you enabled "Save incoming Media"
    in your whastapp\Setting\Chat setting\Save Incoming Media?

  • I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

    I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
    Here is what the etrecheck results are:
    Problem description:
    slow at start up, screen is distorted while logging in, it is fine after
    EtreCheck version: 2.1.8 (121)
    Report generated April 5, 2015 at 9:42:01 AM PDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 297
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:7:0
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
        [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
    Startup Items: ℹ️
        HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.ucupdate.plist
        [failed]    com.apple.watchdogd.plist [Click for details]
    Launch Agents: ℹ️
        [not loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
        [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
        [not loaded]    com.logmein.logmeingui.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
    Launch Daemons: ℹ️
        [not loaded]    com.adobe.fpsaud.plist [Click for support]
        [not loaded]    com.google.keystone.daemon.plist [Click for support]
        [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
        [not loaded]    com.logmein.logmeinserver.plist [Click for support]
        [not loaded]    com.logmein.raupdate.plist [Click for support]
        [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.ARM.[...].plist [Click for support]
        [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Android File Transfer Agent    Application  (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
        HP Product Research    Application  (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
        HPEventHandler    Application  (/Library/Printers/hp/hpio/HPEventHandler.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        LogMeInSafari64: Version: 1.0.660 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeIn: Version: 1.0.660 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeInSafari32: Version: 1.0.660 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 10.0.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             7%    ocspd
             4%    WindowServer
             1%    kextd
             0%    ps
             0%    securityd
    Top Processes by Memory: ℹ️
        137 MB    Microsoft Word
        120 MB    Safari
        86 MB    ocspd
        82 MB    CalendarAgent
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        310 MB    Free RAM
        1.89 GB    Active RAM
        1.55 GB    Inactive RAM
        544 MB    Wired RAM
        1.13 GB    Page-ins
        8 KB    Page-outs
    Diagnostics Information: ℹ️
        Apr 5, 2015, 09:32:47 AM    Self test - passed
        Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
        Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
        Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • How do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

    how do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?

    How long did you press and hold both the Select (Center) and Menu buttons together?  Have you tried doing this procedure more than once?  Is the hold switch in the Off position?
    If nothing else, let the iPod's battery fully drain. Then charge it back up again.
    B-rock

  • Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it. Update it to IOS 7.1.1

    Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it and still cannot be fixed. I updated it to IOS 7.1.1 recently only, does it have connection with the inconvenience I am experiencing right now? What should I do? Thanks!

    Hi Melomane1024,
    If you are still having issues with your iPhone’s speaker, you may want to look at the steps in this article -
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my prob

    Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please

    Hey Kirby17,
    Thanks for using Apple Support Communities.
    If you are not getting any sound from the speaker, follow this article.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Have a nice day,
    Mario

  • My phone randomly doesn't ring when people call and not sound the text alert. I checked all the settings and them seem to be correct. Anyone know how to fix this?

    My phone randomly doesn't ring when people call and not sound the text alert. I checked all the settings and them seem to be correct. Sometimes it rings, many times it doesn't. I have missed several calls. Same with texts. Anyone know how to fix this?

    Symptoms
    No ringer sound
    Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 2)
    Go to Settings> General> Reset> Erase All Content and Settings. Warning: This will delete all user data on the device. Verify that you have a backup before proceeding. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 3)
    Restore device using latest version of iTunes. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Contact Apple for service options)

  • HT3819 homesharing stops when computer sleeps. I already checked the "wake for access". What is wrong?

    Homesharing stops when the computer sleeps. Already checked the " wake for access" and already changed the computer sleep to never.

    I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

  • Why wont pages insert current date when templates open?

    Pages 5.1 does not allow us to "Control CLick" on a date and get an advanced Edit menu with a check a box that will automatically update the date in a template to the current date (or not if unchecked) when you open it. Does this feature exist somewhere else in this version or hae they done away with it?

    Insert the date and then just click and hold and the choices will pop up.
    No control or right click required.
    Peter

  • Firefox suddenly stopped opening webpages, while other browser work properly. I checked Proxy settings and everything that is mentioned in the central help page, but still no solution found...

    In addition, i tried to re-install Firefox many times, without a result. In the time these lines are written, I am using Google Chrome to surf the web.
    Neither proxy settings, nor the true/false ipV6 values helped.
    The '''"symptoms"''' are as following:
    --> The programm itself starts correctly, at usual speed, with no crashes or error messages to pop-up.
    --> No page is displayed, neither the home page, nor any other one. I only see a blank white page.
    -->The name of the starting tab, as of any other new tab I try to open is "(Untitled)"
    -->There is no probability of errors in the Internet Line, because I am using it right now, running Chrome.
    -->The full scan results are totally clean, using Panda Internet Security 2011, activated and updated.
    -->The Error Console shows the following messages:
    Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest'.
    Warning: XUL box for _moz_generated_content_after element contained an inline #text child, forcing all its children to be wrapped in a block.
    Source File: chrome://browser/content/browser.xul
    Line: 0
    Warning: WARN addons.updates: HTTP Request failed for an unknown reason
    Source File: resource://gre/modules/AddonUpdateChecker.jsm
    Line: 503
    Warning: WARN addons.repository: Search failed when repopulating cache
    Source File: resource://gre/modules/AddonRepository.jsm
    Line: 573
    Error: Livemark Service: feed processor received an invalid channel for http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
    Source File: resource://gre/components/nsLivemarkService.js
    Line: 635
    Error: Livemark Service: feed processor received an invalid channel for http://www.dent.uoa.gr/data/feeds/announcements_atom.rss
    Source File: resource://gre/components/nsLivemarkService.js
    Line: 635.
    These Error messages appear in the Error Console of the just now downloaded Firefox 4.0. In the previous version, 3.6.12, before removing it, I noticed two more error messages in the error console, like the two last as listed above: With the nema ERROR.
    I am forced now to use Chrome, and I dislike that!
    Some could suspect that Google has sabbotaged firefox to get its popularity by forcing users to change browsing programms by giving them a hidden worm..?? :P
    Please, help me out anyone with good will and strong tech-knowledge.
    Tasos!

    Create a new profile as a test to check if your current profile is causing the problems.
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • My music wont play even when I have my volume up and I rechecked the settings and everything

    I have a Macbook pro and just ranomly my volume stopped working. any ideas how to fix it?

    look in the headphone jack, if there is a red light.
    When the red light is on it is in a digital mode, there is a switch in there that sometimes gets stuck.
    Try a tooth pick, or a Q tip with the tip cut off and gently wiggle it around in there.

  • I am unable to open new tabs, in any way I attempt to do so. I have checked the settings and they are fine, so it's not those. The only way I can open a new tab is to right click on a link and instruct it to open in a new tab.

    Any way I attempt to open new tabs, be it clicking on the new tab button or using the short-cut Ctrl-t, I am unable to open any new tabs on my browser window.
    The only way I have found that I can open a new tab is to right-click on a link and instruct that link to open in a new window.

    Try disabling the Ask Toolbar extension.

  • My ipad 2 won't orientate, and if i played an app such as temple run, the character won't move to the right or left when i tilt it, it just stay in the middle. i have reboot, check the lock and everything thinkable, but no change. need ur advise. help

    help need, please advise

    Quit the app completely and restart the iPad. Then try again.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Maybe you are looking for

  • R/3 Infoset -- Bex Query -- Universe -- WebI / Xcelsius

    Hi there, i got a hint that it should be possible to connect an Infoset with a Bex Query, but i'm not sure if they mean a R/3 Infoset or a BI Infoset. I know that a connection from an universe to an BI Infoset works but does this also work for an R/3

  • OIM 11g R2 - Setting a field as mandatory while provisioning through catalo

    Hi, May I know how i can make a field as mandatory (Red Asterick) while trying to provision an account through catalog wizard.I dont see any option to set required=true while creating a form for an application instance.Thanks.

  • 16:9 footage showing up and exporting as 4:3 letterboxed

    Greetings, I am making a making of doc and have a problem which I am sure is simple to figure out, but I think I'm out of practice to see the obvious. The footage and formats: - Shot and captured in PAL 720x576 (anamorphic checked in file info, shows

  • Resolution requirement of 800 x 600

    Hi, I am trying to install my company's VPN so I can remote in...of course. However, I am getting an error stating that a minimum of 800 x 600 screen resolution is required to install the VPN (5.2)(Windows XP Pro SP3) I have a screen resolution large

  • How to remove download notifications on my xperia Z1?

    I just updated to 5.0.2, and everything is running slow now. However the MOST annoying thing is the download administrator notifications on all previously downloaded files since I bought the phone last year. Can anyone help me disable them? It can no