Why wont my imac 27'' not work with the Belkin AV360?

Recently bought a Imac 27'' a couple of months ago. Thought I would buy a Belkin AV360 converter to play my PS3 and XBOX through onto my Imac. Plugged it all in and it doesnt work. apparently you have to press Commmand and F2 at the same time to turn the screen onto the ps3 but that doesnt work. Does this belking ocnverter only work with older models of the Imac?

at some point forget when
apple removed support for some firewire things in their pin30 connector which caused some older
accessories to stop working sounds like that could be what you're expeierncing

Similar Messages

  • Why does my imac camera not work with maverick operating system

    i updated my software to 10.9.2 yesterday and facetime and photobooth dont recognize my built in camera on my imac

    Try these in order:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

    Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
    In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
    Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
    Purchase under Points by ISP (No contract)
    Thanks
    Abbas

    Hello sir
           I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
    Thanks
    SATHISH KUMAR

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • HT1619 my remote is not working with the new imac 27" :(

    my remote is not working with the new imac 27"    i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

    <http://store.apple.com/us/product/MC377LL/A/apple-remote>
    "Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
    There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
    <http://www.iospirit.com/products/remotebuddy/>

  • We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

    We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

    Joining an encrypted WEP or WPA Wi-Fi network

  • Why is my iMac (G5) not compatible with mountain lion?

    Why is my iMac (G5) not compatible with mountain lion? I have 4 GB ram (667) and around 90GB hard drive space.

    Jewood20 wrote:
    Why is my iMac (G5) not compatible with mountain lion? I have 4 GB ram (667) and around 90GB hard drive space.
    iMac G5 can only be upgraded to 10.5.8.
    If you have continuing use, you are among the lucky ones.  I purchased many of these used from a company that shut down its American office.  Many of these eventually suffered from the "bad capacitor" problem and required a motherboard replacement from Apple.  I was lucky in that my local Genius bar approved these for no charge, even though Apple's extended warranty had expired.
    My last one was my desktop Mac.  It's power supply failed in 2010 and I paid for a replacement.  In Summer 2011 when its HD failed, I decided it was time to move on and purchaed a Mac Mini, which I continue to run on Lion.

  • I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

    I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
    The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
    PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

    Office 2011 is not compatbile with Exchange 2003.
    I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • Why GWt suggest box is not working in the latest versions of Firefox ? It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

    Why GWt suggest box is not working in the latest versions of Firefox ?
    It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

    jbren wrote:
    I repeatedly have problems with playback on my STB's. Go thru all the motions, inhouse agent, fix multi room dvr problems. Unplug unit, unplug dvr, etc. etc. etc.  The DVR'd show will play on the DVR but not on the STB's. What's up with that?
    Sorry to hear the auto fix suggested early did not fix your problem. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync.  But then the new info on my iPhone does not backup to iCloud.  Is there a solution?

    I have a Macbook and iPhone and like to back up to iCloud.  However, my work computer runs Outlook 2003, which I know will not work with the iCloud.  The company has no plans to update anytime soon.  Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes.  The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud.  Is there a solution?

    I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

    fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

    I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

  • ID & password is NOT working with the Menu Bar CC icon

    ID & password that I use for the Adobe CC web page login is NOT working with the Menu Bar CC icon (Mac OS 10.10.2). I have two updates to download, but the ID and/or password is rejected. Also the the "Hint" field is blank.https://forums.adobe.com/discussion/create.jspa?containerType=14&containerID=4670&question =true&subject=ID+%26+password+…

    If the is prompts like Creative Cloud wants to make changes to system :  Please enter Mac username and Password.

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

Maybe you are looking for

  • [SOLVED] Empathy does not work after gnome upgrade

    Hey there, I have upgraded gnome from 2.26 to 2.28. Almost everything is perfect (in fact apps start faster than before) but empathy does not connect to msn or any other protocol. Any help would be appreciated. Tks Last edited by mmf1902 (2009-10-17

  • Soap:Server was unable to process request. --- Value does not fall within the expected range

    Brand spanking new Sharepoint 2010 RTM and Designer 2010 RTM install. Unable to edit any page whatsoever even when checking out. Error in SP Designer: soap:Server was unable to process request. ---> Value does not fall within the expected range. Like

  • Inbound Vendor Master IDoc to populate Address Mgmnt

    Morning All I have a requirement to populate the Central Address Management from the Vendor Master when an inbound Vendor Master IDoc (CREMAS) is interfaced via LSMW. I have read that 'Serialization' is the key and that I should set up the system so

  • Videos telling me my device is in safe mode but it is NOT

    I've had the Lenovo Yoga 10 tablet for a year now and all was well until 1 month ago. Now intermittantly but more often than not, when I play a video I'm getting, "video can not be played in Safe Mode". What the %$£!!. The videos are of cute animals

  • Question about creating JPEG still from movie clip?

    The aperture help says that a frame will be copied as part of a stack .. But I do not see this to be the case. When I make a frame from a movie, I don't see ANYTHING different in the browser window. Please help!