Why wont my mac read certain cds?

Recently I have been having some issues with my cd drive. Some cds when I put them in just spin and spin and then the drive makes a weird clicking sound about every 2 seconds and eventually just ejects the cd out. I've tried with multiple cds, new and old, some work the first time and others dont register at all in itunes or anywhere and again just do this weird spinning and sound clikcing thing before being ejected. Also when I try to eject the cd with the eject button while it is doing that, it wont eject. You don't even see the eject sign on your desktop. Could this be my drive that's going bad, can you take your drive out and replace it or clean it? Is that easy to do or do you have to take apart your computer? Any info or suggestions would be much appreciated.

If repairing permissions, restarting your computer, you confirmed that your disc is not damaged and/or a disk cleaner does not work, suggest you contact Rosetta Stone since it is their product. 

Similar Messages

  • HT1338 Why wont my mac finish the software update?

    I just bought Snow Leopard for my mac and when it starts to install it only gets to the point where it says "46 minutes remaining" and then the disk stops reading. Its says to carefully clean the disk and I do, so why wont it finish? I just bought the disk and it cant completely read.

    Where did you purchase the disc from?
    How large is your hard drive and how much hard drive space do you have left?
    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.  Try upgrading again.  Repair permissions and restart your computer again and post the results.

  • Imac 10, 1 won't read certain CDs

    my imac , iMac10,1; Intel Core 2 Duo won't read certain bought CDS and spits them out. We can hear a whirring noise-- but not the clicking sound of the tracks being read-- and then, the CD comes out.
    all software updates have been performed.
    please help and thank you.

    iMac Superdrives are notoriously finicky - what brand are the ones that didn't work? It could also be that the media is slightly scratched, dirty, or the printed side is not in perfect condition. My iMac (only) likes Verbatim.

  • HT1338 why wont my mac mini read snow leopard disc, it will read other dvd's and cd's

    I have a mac mini since 2009 I recently got the snow leopard from apple but when I insert it it in the drive it just makes a few noises then ejects the disc. I have tried other dvd's and cd's and it reads them ok any help appreciated

    It's possible the DVD is damaged, scratched and/or dirty.  Check out KB Articles:  http://docs.info.apple.com/article.html?artnum=50448  How to Handle and Clean CD and DVD Discs and Troubleshooting Mac OS X installation from CD or DVD
    Or you can request another DVD from Apple and/or get your $$$ back.
    Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs.

  • Why wont my MBP read my external HDD?

    I have an '09 MBP running Lion, and a USB EmBrace Bare Docking Station from ACCStation with a 2.5TB 3.5" MediaMax drive in it, and it doesn't work. On the description of the docking station it said specifically that it worked on both USB 2.0 and 3.0, on all versions of Mac OS, and supports drives over 2.5TB, 2.5" or 3.5" HDDs, and that it was plug in play. When I plug it in, it says can't read drive and I can Initialize, Ignore, or Eject. Initialize makes it appear in Disk Utility and opens the app, but it shows up as unmounted and it wont mount. It came with a disc the size of my thumb. I haven't seen a computer that could take that size disc in 10 years, so when the thing didn't work I had to dig up an old PC to run the disc. I copied the software to a thumb drive, then istalled it on my MBP from the thumb drive. But it still does the same thing.
    The MediaMax drive I'm using has over 1TB of data on it, my life basically, I ripped it out of my iMac so I could sell it and now I don't have access to those files. It has Lion installed on it too. I spent $60 on this darn docking station, and the tech support at ACCStation is one of the worst I have ever seen in my entire life, I'm not even sure they even understand what I'm saying. Please, I need help. If this thing is defective I want either an exchange or my full money back, because if I just return it they only give me something like 50% credit back. I don't have the money to waste, moneys tight that's why I'm selling my iMac. I wish I'd gone with eBay, as long as you always read the fine print and do the appropriate research on the product I'm buying I'm virtually always safe. I really hope they didn't just steal my $60 and send me a defective product, or a product that works but is completely useless to me because they exaggerated its capabilities. -.-

    Ah isn't this a question and a problem with some other hardware? I would think so. Send it back, get a refund. Or post on there forum for a workable answer.

  • Why wont my mac book charge

    Does anyone know why my mac book isn't charging when i plug in the charger. I have no orange/green light at all. I also tried other outlets. Any help would be appreciated.

    This is the article on the subject.
    Troubleshooting MagSafe Adapters
    If no joy, your appointment at the Genius Bar for an evaluation is free, in warranty or out. These guys put their hands on these computers all day every day, and are good at physical and power problems.

  • Why Wont My Mac Os X Download Flash Player?

    My Version Of Mac Os X is 10.5.8 and i try to download adobe flash player but it wont work i cant do anything because i dont have adboe flash player and its really boring. Please find an answer to this thank you and bye.

    MacOS 10.6 or higher is required to use Flash.  If you have an Intel Mac, you should be able to download the latest MacOS from the AppStore for free.

  • Why wont my mac mini recognize my wireless keyboard?

    Help! I just bought a mac mini and an apple wireless keyboard, but it wont recognize the keyboard.  I can do nothing towards registering my mac mini.

    I have the same problem.  My late 2009 mac mini just died three days ago.  I bought a new mac mini (late 2012 version) and am trying to hook all up and get going.  I have the monitor and mouse talking to the mac mini.  When I get to the keyboard screen I get nothing but an image of the side of a keyboard.  At first I received a passcode to input on the keyboard and hit return.  I did it and nothing happened.  The passcode appeared again and I entered it and again nothing.  I read to turn off the keyboard and start again.  I've donw this and now I don't even get the passcode option.  Just a screen with the side of the keyboard.  What shall I do.  Does it think it's paired with the 'dead' mac mini?  I read that I need a wiired keyboard to pair the two, but I was never told that and I do not have one.  Let me know what I should do next.

  • Why wont my mac turn on?

    I shut down my computer after upgrading traktor by Native Instruments. I came home and now my mac wont turn on. What could i do?

    Helixsquared,
    iPads and iPhones use iOS; Macs use OS X.
    What you could do is make an appointment at your nearest Apple store or Apple-authorized service center to have them diagnose the problem.

  • MBP Not reading certain CDs

    Hi,
    We've just bought a brand new 2GHz MacBook Pro with an extra 512Mb RAM installed (by Apple). After dutifully downloading about 400Mb of updates, including upgrading it to OSX 10.4.7 and downloading a firmware update (everything went fine), we started to play around with it.
    First disk I put in was a Futurama (Season 4) DVD - Apple DVD Player asked to confirm the region selection and said that "The region could only be changed 5 more times" - the disk played fine through both DVD player and Front Row.
    Next, I ejected this and put a music CD in (Jools Holland: Swinging the Blues, Dancing the Ska), but the MBP just spat this out. Next, I tried the Office '04 Student Edition installer CD, and after about 3 mins of clicking and whirring, this got spat out too. Thinking we had a dead CD drive on our hands, I tried 3 more music CDs - all worked fine -opened up in iTunes and Front Row and played fine. I even tried the installer CD for Photoshop CS2 and this worked fine, so did the Mac OSX Installer DVD (only software DVD to hand...). A CD that was burnt on our G4 Tower also worked fine
    I tried the two problem CDs in my G4 PowerBook (OSX 10.4.5), and they worked absolutely fine.
    I've done the basic troubleshooting things - reboot, repair permissions, reboot again, create another user account to see if the problem still exists, and there's no change - the two CDs keep on getting rejected by the MBP.
    What's going on here - is there an easy way to resolve this problem without taking the laptop on a 3 hour round-trip drive back to the Apple store? Everything else about it's fine - there is a slight whine but nothing at all to moan about (only noticable when actually listening for it). Are there any prefs files I can trash?
    The MBP has the SuperDrive, whereas the PB only has a DVD/CD-RW Combo drive.
    Thanks for the help

    The region limitation is explained here:
    http://docs.info.apple.com/article.html?artnum=60183
    While there are some region free DVD players, none of the ones I've seen on Macs are.
    Also Macs don't support Copy Protected CDs:
    http://docs.info.apple.com/article.html?artnum=106882
    Disks you've created on media which is not compatible with the drive may also pose a problem:
    http://docs.info.apple.com/article.html?artnum=58641
    I've also found a lot of bad media out there. Media stored on spindles have a tendency to last much shorter than media stored in jewelcases.
    The fact the Office disk got spat out suggests the drive or the disk in question may be becoming dirty.
    While there are disk drive cleaners out there, if your machine is under warranty, I'd recommend you stick with having AppleCare take care of it. Note, with notebook computers you often don't have to drive anywhere. Just call AppleCare, and they'll ship you a box to have it repaired by their service center. Before you do that, backup your data, and be sure to keep track of any case numbers they give you.
    As for your MacBook Pro:
    http://docs.info.apple.com/article.html?artnum=303365
    is recognized as something to contact AppleCare about.

  • Why Wont my mac Mini Shut Down After SSD Install?

    Heres the Gist,
    I have a late 2009 Mac Mini (A1283) 2.53 GHz, 4gig ram.  that i've been running as a media server.  Recently the harddrive died in it. I decided to install a Intel 320 Series GEN3 SSD Drive.  The install went fine and clean, Mac booted up perfectly, installed a new version of OSX 10.6, no issues, did all the updates. The only software I installed was Plex Media Server (http://www.plexapp.com/)  and Google Chrome.
    Now my issue is, when i go to shut the Mac Mini down, all that happens is the dock disappears and all the desktop icons then it just sits there, nothing happens.  I reset the PMU and it still does the same thing, except now the fan is on high all the time.
    Other things i've tried:
    Verifiying and Repairing the Disc Permissions
    Verifiying and Repairing the Disc
    Closing all apps before shut down
    disconnecting all network drives and external drives before shut down
    reseting the PMU
    When I get home im going to try:
    Resetting the SMU.
    Running YASU (Although its a fresh install with no apps so not to sure what it will find)
    Im looking for any and all other suggestions to try.  I was considering upgrading to 10.7 to see if its just a software glitch, but im not to sure why this would be happening now.
    thanks for any and all advice in advance

    It's SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Plus the PRAM > Resetting your Mac's PRAM and NVRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Why does my Mac block certain websites?

    My Mac blocks Yahoo and Facebook most of the time.  I was told that this is not my router or modem and is a security issue.  Why does it only block specific sites?  I can't seem to find anything in my security settings.

    You're connected on a private and particularly an access-controlled and restricted network, and the administrators of that network have decided that connected users shall not expend available resources and bandwidth with access to various web sites and/or web services. 
    If the network administrators have established the blocks correctly, you'll need to use fairly advanced techniques to bypass the blocks, and attempts to bypass these blocks — whether the bypasses are successful or not — may well be considered grounds for network disconnection and/or disciplinary action by the organization.
    It's common to log these sorts of failures and attempts to bypass, and — given they have control of the switching gear — it can be feasible to uniquely identify the client computer that's making these requests.  If not the specific identity of the client computer system or the credentials used, then the location of the client computer that's attempting the connections.
    Check with your network administrators, and with the site's policies and procedures.

  • Why wont my mac remember my password for yahoo email?

    It keeps giving me this pop up...
    The Yahoo! IMAP server “imap.mail.yahoo.com” rejected the password for user “[email protected]
    Enter your password again or cancel.
    I enter my password, click the box for it to remember in in my Keychain and ten minutes later, it pops back up.
    My MacBook Pro
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 320M 256 MB
    Software  Mac OS X Lion 10.7.5 (11G63)

    Why not ask Yahoo tech support? 

  • Why wont my Mac Pro Start?!?

    Hello All
    My Mac Pro (Early 2008) has begun acting strange. It wont power on.
    I have done some trouble shooting (Removed all attached Devices (USB, ESATA, NETWORK,) Basically the only thing plugged in the rear is USB for keyboard / mouse and 1 DVI Monitor Hook up.
    I replaced the power cable (Jug Cord), changed which wall socket the  power plugs into.... but still it wont start.
    A fix is to Pull Out the power cord from rear of MAC Pro, leave out for about 1 minute and then plug it back in. I hear it click and then it will start up once i press the power button. However once I  Power back down, same problem.
    Is this a faulty PSU? Or is there an internal Battery that could be causing problem?
    I have tried removing the ram sticks also, same problem.
    MAX OSX 10.6.8
    2x4GHz Quad-Core Intel Xeon
    10GB 800 MHz DDR2 FB-DIMM

    Interesting, so putting a ATI 5770 means i cant boot from DVD? How come?! What if i need to re install OS from DVD?
    Secondly, i was reading apple website http://support.apple.com/kb/TS3891
    Mac Pro: Using ATI Radeon HD 5770 graphics card with Mac Pro released before 2010
    Symptoms
    You may notice display anomalies or issues playing back video or other HDCP-encoded content when you use an ATI Radeon HD 5770 video card in Mac Pro computers released before the Mac Pro (Mid 2010).
    Resolution
    The ATI Radeon HD 5770 video cards are supported only on Mac Pro (Mid 2010) models. They are not supported in earlier versions of Mac Pro. Learn more about graphics card compatibility for Mac Pro.
    Then It says:
    Graphics cards for Mac Pro (Early 2008)
    ATI Radeon HD 2600 XT
    NVIDIA GeForce 8800 GT (part number 630-9191 or 630-9897)
    NVIDIA Quadro FX 5600
    ATI Radeon HD 4870, offered as an upgrade kit
    Note: The Radeon HD 4870 card requires Mac OS X v10.5.7 or later for use with the Mac Pro (Early 2008).
    Can someone tell me, whats the difference between all the 4870 Cards?
    This one is $130
    http://www.amazon.com/Asus-EAH4870DK-HTDI-512MD5-Radeon/dp/B001KZOJCE
    This one (refurbished yes) Is less than $50: Will this one work in my Mac Pro??!?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814150594
    I dont really have $200+ for a 5770 Card now.

  • Why wont my mac let me conect my ipone to it in iTunes

    Why won't my MAc compter allow me to connect any of my devices in iTunes?

    I am having the same problem. Are your devices running IOS 7? After I downloaded IOS 7 on my devices is when they were no longer recognized by my Mac computer with iTunes 10. You may have to download iTunes 11.1 (although I am not positive) but I am reluctant to do this myself because of all of the problems that people have been having with 11.1.

Maybe you are looking for

  • Ssodatan and partner application

    Hello, I have configured successfully a java partner application. The problem is that each time I run ssodatan command all the records in the table WWSSO_PAPP_CONFIGURATION_INF_T are removed (the one for ny partner application too) and only portal30

  • Browser error on APEX Login Page

    Good morning, Version Information: - APEX 3.1.1 - Database 11.1.0.6.0 - Application Server: 10.1.3 I'm using the APACHE install on my APP server to connect to APEX. When I connect to the APEX_ADMIN login page, after filling in the blanks, I get a bro

  • Error while starting WebLogic at background

    Hi, All! I try to start WebLogic at background mode: nohup ./startWebLogic.sh 2&>1 & but got this error: JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=192m WLS Start Mode=Development CLASSPATH=/ho

  • Creation of previews/thumbnails of PSD files not working in v3.0.1

    I'm using Aperture 3.0.1, PS 4 to edit photographs. My workflow will be the usual, Photo > Edit with Adobe PS, in my Aperture browser thumbnails/previews will be created for the PS file. When I save my work in PS, the thumbnails and previews in Apert

  • SAPScript graphic not printing

    Hi Folks I have a problem in a 3.1i system (yes that's right 3.1i - ah those were the days...I remember when..etc). I have changed a SAPScript layout (just the contents of a text element in the main window) and this works fine. However something is n