Why wont my mac turn on?

I shut down my computer after upgrading traktor by Native Instruments. I came home and now my mac wont turn on. What could i do?

Helixsquared,
iPads and iPhones use iOS; Macs use OS X.
What you could do is make an appointment at your nearest Apple store or Apple-authorized service center to have them diagnose the problem.

Similar Messages

  • Why wont my razor turn on ? solid white light stays on .

    why wont droid razor turn on ? white light stays on.

    I had a similar problem. The phone wouldn't turn on at all, though when I pressed the power button a white light would come on briefly, then one time it came on and stayed on, but that was all. I was told (by Verizon) that once the phone discharges all the way to zero it can be difficult to start up again even if it is plugged into the charger. Plugging it into the charger in the house didn't work, but I tried the car charger and it started charging right away.  My theory is that the wall outlet charger does not have enough "oomph" to kick start the phone if it is totally depleted, but the car charger must have more (what? volts/amps I'm no electrical expert) whatever it needs to bring it back and start it charging. Once it got going (at 20%) I brought it back into the house and it charged OK.  Wish I would've though of this when the other phone did this a few weeks ago! What I'm thinking is that the outlet charger needs to be redesigned to fix this problem.  There is a very good chance that, no matter how good you are about keeping your phone charged, there will be that one time that it discharges down zero and then . . .

  • Why wont my ipod turn on when i restorecovery red it on mode

    why wont my ipod turn on when i restorecovery red it on mode?

    Not knowing what " restorecovery red it on mode " means:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1338 Why wont my mac finish the software update?

    I just bought Snow Leopard for my mac and when it starts to install it only gets to the point where it says "46 minutes remaining" and then the disk stops reading. Its says to carefully clean the disk and I do, so why wont it finish? I just bought the disk and it cant completely read.

    Where did you purchase the disc from?
    How large is your hard drive and how much hard drive space do you have left?
    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.  Try upgrading again.  Repair permissions and restart your computer again and post the results.

  • Why wont my mac book turn on completly it just shows the start screen and under the appl theres a bar that keeps loading and when its done it just powers off  why is this happening??????

    Why won't my macbook air turn on completly just at the start up page and under the apple logo there's a bar that just loads and when its done loading the Mac just powers off this just happens over and over I'm afraid if I do any thing my pictures will be lost on the computer ???

    Hi jasonfromforthworth,
    Thanks for the question.  If you have updated to Yosemite, then the Apple Logo with the status bar is the expected behavior for when the computer starts up.  However, the powering off is not supposed to be happening ... so here are some steps to take if your MacBook Air won't turn on.
    OS X: What is Safe Boot, Safe Mode? - Apple Support
    http://support.apple.com/en-us/HT201262
    Starting up in Safe Mode
    Follow these steps to start up into Safe Mode.
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup sound, press and hold the Shift key. The Shift key should be pressed as soon as possible after startup, but not before the startup sound.
    Release the Shift key when you see the Apple logo appear on the screen.
    After the Apple logo appears, it may take longer than usual to reach the login screen. This is because your computer is performing a directory check as part of Safe Mode.
    To leave Safe Mode, restart your computer without pressing any keys during startup.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Last Modified: Oct 22, 2014
    I hope this information helps ....
    - Judy

  • HT4628 why wont my mac allow me to turn my wifi off?

    ?

    Not much info here as to what you might or might not have done.  Try system preferences>network, try the turn Airport off button upper right.

  • Why wont my mac mini recognize my wireless keyboard?

    Help! I just bought a mac mini and an apple wireless keyboard, but it wont recognize the keyboard.  I can do nothing towards registering my mac mini.

    I have the same problem.  My late 2009 mac mini just died three days ago.  I bought a new mac mini (late 2012 version) and am trying to hook all up and get going.  I have the monitor and mouse talking to the mac mini.  When I get to the keyboard screen I get nothing but an image of the side of a keyboard.  At first I received a passcode to input on the keyboard and hit return.  I did it and nothing happened.  The passcode appeared again and I entered it and again nothing.  I read to turn off the keyboard and start again.  I've donw this and now I don't even get the passcode option.  Just a screen with the side of the keyboard.  What shall I do.  Does it think it's paired with the 'dead' mac mini?  I read that I need a wiired keyboard to pair the two, but I was never told that and I do not have one.  Let me know what I should do next.

  • Why Wont my mac Mini Shut Down After SSD Install?

    Heres the Gist,
    I have a late 2009 Mac Mini (A1283) 2.53 GHz, 4gig ram.  that i've been running as a media server.  Recently the harddrive died in it. I decided to install a Intel 320 Series GEN3 SSD Drive.  The install went fine and clean, Mac booted up perfectly, installed a new version of OSX 10.6, no issues, did all the updates. The only software I installed was Plex Media Server (http://www.plexapp.com/)  and Google Chrome.
    Now my issue is, when i go to shut the Mac Mini down, all that happens is the dock disappears and all the desktop icons then it just sits there, nothing happens.  I reset the PMU and it still does the same thing, except now the fan is on high all the time.
    Other things i've tried:
    Verifiying and Repairing the Disc Permissions
    Verifiying and Repairing the Disc
    Closing all apps before shut down
    disconnecting all network drives and external drives before shut down
    reseting the PMU
    When I get home im going to try:
    Resetting the SMU.
    Running YASU (Although its a fresh install with no apps so not to sure what it will find)
    Im looking for any and all other suggestions to try.  I was considering upgrading to 10.7 to see if its just a software glitch, but im not to sure why this would be happening now.
    thanks for any and all advice in advance

    It's SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Plus the PRAM > Resetting your Mac's PRAM and NVRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Why wont my mac book charge

    Does anyone know why my mac book isn't charging when i plug in the charger. I have no orange/green light at all. I also tried other outlets. Any help would be appreciated.

    This is the article on the subject.
    Troubleshooting MagSafe Adapters
    If no joy, your appointment at the Genius Bar for an evaluation is free, in warranty or out. These guys put their hands on these computers all day every day, and are good at physical and power problems.

  • Why Wont My Mac Os X Download Flash Player?

    My Version Of Mac Os X is 10.5.8 and i try to download adobe flash player but it wont work i cant do anything because i dont have adboe flash player and its really boring. Please find an answer to this thank you and bye.

    MacOS 10.6 or higher is required to use Flash.  If you have an Intel Mac, you should be able to download the latest MacOS from the AppStore for free.

  • Why wont my mac find my time capsule when hard wired with an ethernet cable

    Im truying to connec to my time capsle with an ethernet cable and my macbook pro wont fnd it?

    How old is the TC?
    Is the TC setup to join a wireless network? If so TC turns off the ethernet ports.. strange but true.
    If neither of the above.. it is just normal ML networking with wet string standard.
    Reboot the TC.. Reboot the whole network.. restart in order.. modem, router. TC.. other network equipment.. clients.. (some of these are probably one and the same device.. leave 2min between each).

  • Why wont my ipad turn on, it suddenly  stopped working after using voice over

    suddenly ever since i activated voice overit only took a few minutes before my ipad2 turned off and wont turn on, and if it is on theres nothing on the screen

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Why wont my iPhone turn on?

    While I was at school, my iPhone 4 suddenly just shut off. I was just tossing it between my hands gently, and the screen turns black! When I push the lock button, you can see the screen turn from VERY dark blue to pitch black. Now after a few days, it wont even turn on. It only connects to itunes when its in DFU mode. I've tried:
    Holding the home button and power button for 10 seconds
    Plugging into a computer via USB
    Plugging into a AC wall adapter
    Getting it to DFU mode and restoring it
    My iPhone 4 is out of the warrenty :\ So what are my options?

    I got errors before, I forgot what numbers they were. But now I get errors like 18, 13? 9 (i think?).
    When the iPhone isnt in DFU mode, the iPhone is generally cold. When its not in DFU, the display is off, unable to connect to itunes, but the iphone heats up quickly on the top right side. Does that have to do with anything?
    And no, after I restore, switching the vibration switch does not make the iPhone vibrate or does it connect to iTunes. (After a full restore, I waited like 20 minutes for it to connect)

  • Why wont my Mac Address Book overwrite my Palm Desktop????

    I have spent the last few days messy about with this bloody isync and my treo 650 trying to configure the address books in the way i would like.
    yesterday i managed to finally back up my palm top (treo 650) and merge it with my mac address book. the only problem with this was that there were a lot of duplicate names, or names from the address book that didnt have numbers etc etc.
    Anyway, the good thing was that i now had all of my contacts from my phone into my mac address book.
    this morning i spent hours going through my now complete mac address book weeding out and duplicates, and basically making it perfect.
    now i cant figure out how to overwrite my treo and my palm desktop on my mac with my mac address book contacts!!!! its driving me crazy!
    i am not worried about ical, or any of the other things syncing (although i suppose it would be a bonus) i just want to get my address book contacts on my treo and to overwrite the old messy version of palm desktop that has all of the duplicates in it.
    any ideas? i am running OSX 10.4.8 isync 2.3 and have palm desktop 4.2.1
    many thanks
    G4   Mac OS X (10.4.8)  
    G4   Mac OS X (10.4.8)  

    not quite sure what has happened now. i backed up the address book and exported the v cards (when you said select all in the left most sidebar did you mean select all of the groups or just the group called 'all'? i selected just the group called all).
    i then imported them fine into palm desktop using the methods you said except that in my mac address book i had 586 cards and in palm desktop it only seems to say i have 312.
    also when i was copying them it asked it i wanted to keep the new or old version with the only differences i could see between the new and the old cards being that it now said CATEGORIES: Palm in the notes section. i said yes to replacing all of the old ones with these new palm ones.
    when i went back to the address book afterwards, it now seems to have taken a lot of various addresses out of the various groups i had them set up in. they are all still there in 'all' though so at least thats something.
    i also seem to have some random duplicates in palm desktop.
    i have also noticed that if for example in mac address book you dont fill in the first name in the first name box and the surname in the surname box (ie you write the first name and the surname in the first name box) then this can cause problems when you try and display stuff alphabetically in palm desktop.
    i have some contacts with just names and emails, and some with numbers, emails etc etc. could this cause problems? i am also wondering if each card isnt set up in exactly the same format, could this cause problems in palm desktop (ie the order you have mobile, home, email etc listed on each card?)
    still not sure why i only have almost half of my numbers though!?
    can you help?
    many thanks

  • Why wont my mac remember my password for yahoo email?

    It keeps giving me this pop up...
    The Yahoo! IMAP server “imap.mail.yahoo.com” rejected the password for user “[email protected]
    Enter your password again or cancel.
    I enter my password, click the box for it to remember in in my Keychain and ten minutes later, it pops back up.
    My MacBook Pro
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 320M 256 MB
    Software  Mac OS X Lion 10.7.5 (11G63)

    Why not ask Yahoo tech support? 

Maybe you are looking for

  • Aperture 3.4.3 video time off by 1 hour

    Imported videos from a Canon Vixia 301M are ahead by one hour from the correct time.  Contacted Canon support and the time stamp on the videos is correct.  After importing, stills taken have the correct time but videos are ahead by 1 hour.  Checked i

  • COGI Posting period error

    Hello, I am in the process of cancelling one of the confirmations made on the date 22.01.2006. I have cancelled the confirmation, because of period issue it posted to the COGI. In COGI it throwing this error message. In plant XXXX, post to current pe

  • Instant messenger programme that supports audio and video from mac to pc

    hi can anyone recommend a good IM programme that gives audio and video from a mac to a windows based pc.i am using an isight on my mac and the person at the other end is just using a bog standard web cam.i tried yahoo but didnt realise it doesnt supp

  • How do I open a Firefox browser window?

    Man, is this frustrating! I have a Samsung Galaxy 10.1. I downloaded Firefox from Google Play. I synched it. I added the "full screen" add-on. So where's the browser? I can't even get to anything that will let me type in a URL or a Google search term

  • How do I get a blank page with Ctrl-T

    When I open a new tab, I get Yahoo Search. I want a nice blank page. == This happened == Every time Firefox opened == I started using Firefox 3.6