Why wont my muse website present itself in the center?
My adobe muse website looks great in the desk top view - but when I look at it in my ipad and iphone - everything is stuck to the left and not centered at all. Please advise - this shouldn't be happening.
http://mymoontimesite.businesscatalyst.com/index.html
Hello Dana,
I noticed that you haven't created a phone version of your site yet. It's highly recommended that you create a phone layout of your site as well for better performance in mobile devices. This doesn't mean that the desktop version will not work on mobiles, but having a mobile layout is always better than accessing the desktop site in mobile devices.
As for the left alignment of the site in mobiles, check this related post: http://forums.adobe.com/message/5043301#5043301
And this one too: http://forums.adobe.com/message/5431271#5431271
Hope this helps.
Cheers
Parikshit
Similar Messages
-
Why wont my image boarder light up when the image is hovered over, border is set to 2.
why wont my image boarder light up when the image is hovered over, border is set to 2.
Because you have not coded it correctly. It is difficult for us to tell you where your mistake is without seeing your test page.
-
how does the iTune icon present itself onto the dock. ?
And how does it play without being requested ?1. The SCB-68 is just a terminal block; it does not measure anything. The measurement is made on the board connected to the SCB-68.
2. Computer-based data acquisistion devices and 480 V motors with solid state speed controls do not "play nice," as the kids say. The connections you are trying to make may well end up with a fried data acquisition board, fried computer, and MOST IMPORTANTLY a fried USER!
Ground loop problems may produce noisy measurements or may destroy all the low current devices (like the computer) in the system.
Signal conditioners are not only to reduce noise but also to provide safe isolation between the high voltage and high power parts of the system and the more sensitive parts.
A thermocouple is a voltage generating device. The measurement system measures that voltage (typically millivolts) and independently measures the temperature of the "cold junction" of the thermocouple. The temperature at the hot junction of the thermocouple is calculated as Temperature(TC voltage difference) - Temperature(cold junction). If currents flow through the TC wires, due to ground potential differences between the motor frame and the computer ground for example, the voltage drop from Ohm's law is added to the TC voltage and will produce temperature errors. TC wire may have significantly higher resistance than wires used for most elelctrical signals so the interfering signal may be greater than the desired signal.
Lynn -
My index page and services page specifically for the English version of my website looks broken and I can't figure out why.
I created this using Adobe Muse. I'm not the best in navigating the back-end/coding part of the website but I'm afraid it may be something in the code that is causing these two pages to break. The weird thing is they look fine when you go to the Spanish version of the pages.
Index, English: AIT: Translations to Increase Sales, Brand Recognition and Global Reach
Services, English: AIT ofrece servicios de traducción para documentos y páginas comerciales en internet y reproducción multilingüe de archi…
Thank you for your help.Hi,
Are you still facing this issue ? Your site seems to be working fine at my end both in spanish version as well as the english version.
I would request you to try using a different browser .
Also, if you are still facing the issue,it would be great if you could share some screenshots.
Regards,
Rohit Nair -
why wont my phone charge when i plug my usb into my macbook air?
Most USB ports can't supply the power required to charge a phone.
The original USB port was limited to 0.5 amps at 5 volts which is 2.5 watts.
Your phone probably has a 10 watt charger.
Recent machines allow more power from the USB port but I doubt they allow 2 amps which is what would be required to get 10 watts. Even if they did a 2 amp draw is going to be a heavy load on the MBA battery. -
Why is one old photo forcing itself to the top of my Photo Stream?
Hi,
My question is a variant on "how do I remove a single photo from Photo Stream?". I know Apple in their infinite wisdom don't let you do that, but I have an issue which is not of my own doing that I can't solve otherwise.
Someone emailed me a photo of my cousin on his first day at school, and I saved it from the email into the photo library on my iPhone 4S using the 'long hold and Save Image' process. It was duly saved to the library, then added to the Photo Stream.
Ever since this one photo has forced itself into the 'most recent' slot in Photo Stream. I've taken hundreds of photos since it was first saved from the email and they all go into the Photo Stream but this saved photo always jumps to be the most recent one; since saving it, it's the only photo I've ever seen as the thumbnail for Photo Stream on my iPhone.
Deleting it from my iPhone makes no difference, obviously. So how the heck do I get this image to either behave properly or just get out of my Photo Stream altogether?
Cheers,
OwenNo, the opposite is occurring. Like I say, this errant photo, taken weeks ago and added to my iPhone photo reel from my iPhone mail weeks ago, is acting like its the most recent photo within Photo Stream. It always stayed in the same place in the iPhone photo reel but in Photo Stream it always, always jumps to the slot that should be occupied by the most recently added photo.
-
The top-most menu/options bar on websites where you could do things like log out, view your own profile, or change settings is what I was referring to. I can't click on anything up there, but I can click on everything else on the site.
That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode -
Why wont my iphone 5 let me accept the terms to download apps?
i updated my phone a couple of days ago to ios7.0.2.
since then i can not redownload my apps back onto my phone.
any ideas as to why?I've got a similar problem, i can't update applications
-
Why wont my navigation menu bar navigate to the next page
Im using DW CS5 and I have assigned links to my navigation menu its hyperlinked but when I click on the button it doesnt navigate to the rest of the pages why is that I am new to DW
The code is below I just want a simple navigation bar that when I click on biography it takes me to the biography page and so on...I even tried the "href" nothing works I try it in live view and it doesnt work I try it out of live view and it still doesnt work Im using DW CS5 This page was made using a DW template but I changed it around to fit my liking
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>WebIntersect &Bull;Find ElizabethVictoria</title>
<style type="text/css">
<!--
body {
background: #000;
margin: 0;
padding: 0;
color: #FCCFDD;
background-color: #000;
font-family: Verdana, Arial, Helvetica, sans-serif;
font-size: 100%;
line-height: 1.4;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
color: #FCCFDD;
font-weight: bold;
text-align: center;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
color: #000;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color:#808080;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #FCCFDD;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
color: #FCCFDD;
/* ~~ this container surrounds all other divs giving them their percentage-based width ~~ */
.container {
width: 80%;
max-width: 1260px;/* a max-width may be desirable to keep this layout from getting too wide on a large monitor. This keeps line length more readable. IE6 does not respect this declaration. */
min-width: 780px;/* a min-width may be desirable to keep this layout from getting too narrow. This keeps line length more readable in the side columns. IE6 does not respect this declaration. */
background: #000;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout. It is not needed if you set the .container's width to 100%. */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
background: #000;
color: #FCCFDD;
.sidebar1 {
float: left;
width: 20%;
padding-bottom: 10px;
background-color: #000;
background-image: url(images/Untitled-6.gif);
background-repeat: no-repeat;
.content {
padding: 10px 0;
width: 60%;
float: left;
.sidebar2 {
float: left;
width: 20%;
padding: 10px 0;
background-color: #000;
background-image: url(images/Untitled-6.gif);
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 1px solid #666; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
margin-bottom: 15px; /* this creates the space between the navigation on the content below */
ul.nav li {
border-bottom: 1px solid #666; /* this creates the button separation */
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 5px 5px 5px 15px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
text-decoration: none;
background: #8090AB;
color: #000;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
background: #6F7D94;
color: #FFF; -
Why wont this jar execute (one way fine, the other is not)
Without using a executable jar this works fine:
java.exe -classpath myproject\classes;lib1.jar;lib2.jar;lib3.jar MyMainClass
MyMainClass is my target class stored in myproject\classes
I make an executable jar called Project.jar (basically all content in myproject\classes with usual manifest file containing target class) and then try
java.exe -classpath lib1.jar;lib2.jar;lib3.jar -jar Project.jar
This does not work and gives error:
Exception in thread "main" java.lang.NoClassDefFoundError: org/springframework/beans/factory/InitializingBean
The class org/springframework/beans/factory/InitializingBean is contained in lib1.jar
I must be missing something fundamental about creating executable jars?? Any ideas or pointers?I've simplified my problem so someone could help me please!!!!
The following runs fine:
java -cp .;Model.jar TestThe following fails:
java -cp .;Model.jar -jar Test.jarException in thread "main" java.lang.NoClassDefFoundError: Model at Test.main(Test.java:8)
Model.jar contains one class model.Model.class
Test.jar contains one class Test.class plus manifest file. The Test class simple does the following:
import model.Model;
public class Test
public static void main(String[] args)
System.out.println("Start");
Model model = new Model();
System.out.println("End");
}Any ideas why? -
Why wont any of my songs start at the beginning?
Please someone tell me how to get my iphone 4 to play songs without starting 7 or so seconds into the song. And then it jumps back to the beginning. It plays my songs totally muddled up and I dont know why. I have been searchinbg the net for hours but all I ever find it is ""Remember Playback Position" not being checked" This box has never been checked to start with so this is NOT what is causing my problem.
On my iphone it shows that the song starts at "0" seconds, at the beginning of the bar. But it doesnt. |It starts at a totally different stage of the song. After a few seconds it then plays th ebeginning ofthe song! The samething happens with my childs Ipod. How can we get this sorted?A simple Reset will often resolve many issues...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
Why wont my phone connect to itunes on the computer
I updated itunes and now my hone wont op up when i plug it into the computer
Has the iPhone ever worked with your computer?
For the charging issue, take a look at this Apple doc -> iPhone: Hardware troubleshooting
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If that doesn't also take care of the iPhone not being recognized problem, one of these Apple docs should help ya out:
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
Why doesn't Muse update in CC like the other Applications?
Whenever Muse has an update, I don't know about it until I open the Muse application and it asks me if I want to update. The the AIR update appears and I have to close Muse so AIR can update. Is this normal?
Hi
We have changed the process in our next release which is soon, so you can expect a more simple workflow in coming version.
Thanks,
Sanjit -
Why is loading some website so slow. before the newest Firfox, it was faster
porn sites are really slow downloading. they did not use to be.
have you added additional blocks.?Right done a reset, got the password sorted,here is the adsl settings, dont think there much use as the b light is flashing orange again,and will not conect to broadband
Line state:
Disconnected
Data Transmitted/Received (GB):
Not available
Downstream:
Not available
Upstream:
Not available
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
Not available
Latency type:
Not available
Noise margin (Down/Up):
Not available
Line attenuation (Down/Up):
Not available
Output power (Down/Up):
Not available
FEC Events (Down/Up):
Not available
CRC Events (Down/Up):
Not available
Loss of Framing (Local/Remote):
Not available
Loss of Signal (Local/Remote):
Not available
Loss of Power (Local/Remote):
Not available
HEC Events (Down/Up):
Not available
Error Seconds (Local/Remot
to add further detail to the slow line speed when it was working,
http://forum.moneysavingexpert.com/showthread.php?t=2862026
and
http://www.uswitch.com/broadband/speedtest/streetstats/#home_de21 2sq_download_0_all_all_0_1
you will see that only virgin has good speeds, ( not available in my street) sky seams to be a tad quicker, but im on the willowcroft exchange (EMWILLO) which has the lower speeds overall. -
Why wont my keyboard light go to all the way brightness?
I turned the keyboard brightness all the way up and I am in a very dark room but the keyboard is hardly lit.
Have to assume you have checked your battery level?
Maybe you are looking for
-
How to save data in a 4D array and make partial plots in real time?
Hi, this is a little complex, so bear with me... I have a test system that tests a number of parts at the same time. The experiment I do consists of measuring a number of properties of the parts at various temperatures and voltages. I want to save al
-
Facebook video call don't work ?
hi i just download apple os marvericks , and i find problem with video call in facebook , somebody can help me please to restart my video call en facebook
-
Display multiple pages in Pages?
Hi there, How can I show at least two pages in parallel on the screen? If it cannot do that, that is so funny... Just image I am using a 27" screen and editing in full screen mode with the software that only can show a "tiny thin" page in the middle.
-
I currently have the 55 gb of ICloud space that I'm using mostly for e-mail. ICloud has sent out a note that I will be downgraded to 5 gb. Is ICloud stating that there will no longer be an upgrade to 50 gb even if you pay for it?
-
Position/size properties messed up of imported svg's in An CC 2014?
Hello, Opening an existing project in Edge Animate CC 2014 gave specific, big negative x and y coordinates of objects on the stage, while the objects still appeared at the right place on the stage. However, trying to alter the position, the object su