Why wont my page update to the changes I put in code?

My webpage is gogobeekeeping.com and my account page wont update itself from the changes i put in code. Here is my changes: basic logo changed to, font changes. When i deselect test server, it shows but not in php.

> if I make it myself it will be pure syntax
What do you mean by "pure syntax".
> I am good with html and css, not php
How is emacs going to help? If you don't know php and are going to write php code, how does emacs make your site less vulnerable then if you used a different editor?

Similar Messages

  • Why wont my phone update to the 5.0?  I get an error message at the very end of the updating process.

    When I go to update my IPhone to the 5.0, it updates until the very end until I get a pop up message saying, "The Network connection timed out".  How can I prevent this from happening or what else can I do to update my phone?

    Try disabling both your firewall and antivirus software, then do the update again.

  • Why wont my iPad connect to the closest/strongest wifi?

    Why wont my iPad connect to the closest/strongest wifi at home? It alway defaults to the one upstairs even when I am right next to our extender in the kitchen?

    Try #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

    Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

    Well, it's probably one of two things: either the awesome dude(tte) who developed this awesome extension was tired of updating or the changes in FFox software architecture carried out between version 3.x and 4+ created challenges that were too difficult for him to surmount or a combination of both. Honestly, I love Mozilla but I think they dropped the ball on the throttle issue. It's such an obvious and necessary function and it's so easy to implement. They should have included it a long time ago as in built feature. And, if you are browsing and looking at this post and you agree. Add a suggestion in mozilla.org. The more of us asking for this function, the better.
    Meanwhile, I have the following solution for you:
    Solution 0.6.9.23.11 (DIY Version of my Solution ):
    Setting Up a Separate Portable Firefox 3.6.x that runs independently of and simultaneously to your latest version of Firefox
    Get FireFox Portable 3.6.24:
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    It's a portable app, meaning that it's got all it's profiles and preference and application files in the same directory. It won't compete with your current installation of Firefox, has it's own separate extension folder etc...
    Get Firefox Throttle 1.1.6
    http://firefox-throttle.en.softonic.com/ (I couldn't find it in the official mozilla site)
    It will be flagged as incompatible with even that old version of firefox (but it isn't). You just need to turn off compatibility checking. You can do that with this extension:
    https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=search
    If you have Bookmarks you want to port to the portable (bad pun intend), backup them up to bookmarks.json file on your desktop and import them to the portable version. You can export/import more stuff using FEBE addon but that's a whole world of headaches if you don't your doing.
    Many of your extensions favourites extensions will no longer work on FFox 3.6.x but if, in that same addon's page, you look around until you find a link to previous versions of the addon, you will notice that the compatibility info is right below the version numbers. Just download and install the latest version that is compatible with you 3.6.x....
    Voila mon ami! Your FFox 3.6 portable has just become your own private Download Mule whom you can throttle to your hearts content (ever throttle a real Mule??? I wouldn't try it, personally...) Do your regular browsing in another (unthrottled) browser and do your big downloads in the Mule...
    If you want to keep using your brand spanking new Firefox for other types of browsing while using this portable Mule edition for the downloads, just add -p -no-remote to the shortcut leading to your Firefox Portable Mule edition.
    For example, my taskbar shortcut to my Firefox Portable is:
    ""C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe"
    I just changed it to:
    "C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe" -p -no-remote
    This will make it occupy it's own independent instance and I can use the both my Firefox Nightly and the Firefox Portable editions at the same time (each one, using a different profile ie. extensions, cookies, password, cache etc).
    If you're on Linux, you can just run this on Wine and set the Windows Version to Windows 2000 in the Wine config,
    If you want to get rid of the Portable Apps splash screen, click here:
    http://www.ghacks.net/2011/06/06/getting-rid-of-portableapps-splash-screens/
    Solution 0.6.9.23.11 (Non-DIY Version of my Solution):
    Download my preconfigured but SWAGGED-THE-HECK-UP PortableFirefox 3.6
    Having realized that some of you may find the above to be daunting. I took my own customize firefox portable, took out all my data and compressed the folder (it's portable, so it'll run as soon as you unzip it).
    Here is a screenshot:
    http://www.mediafire.com/?o95nkwo8y6q535j
    Here is the download link:
    http://www.mediafire.com/?xdw87ivf3184u2s
    Don't forget to modify your Start/Taskbar shortcuts:
    "C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe"
    I just changed it to:
    "C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe" -p -no-remote

  • Why wont my mail open? The mail not being able to open is making me not be able to shut down my laptop.

    Why wont my mail open? The mail not being able to open is making me not able to shut down my macbook.

    Press power button down and hold up to 30 secs to force shut down and then start up and see how u goes on ur mail....

  • I uploaded the giftcard money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

    i put money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

    If you still have your old card listed on your account then try selecting the 'none' option and remove it and then try entering the card's details from scratch. If that doesn't work then what is the full error message that you are getting, and the card is registered to the same name and address (including format and spacing) that you have on your iTunes account ?

  • How to get  the number of page which exists the change bar ?

    In FDK development, I want to find the number of page which exists the change bar.

    zhaopeng,
    You can get the page number by querying the FP_PageNum property of the FO_Page object:
    pageNum = F_ApiGetInt(docId, pageId, FP_PageNum);
    ...or you can use FP_PageNumString if you are using string page numbers.
    If you do not have the ID of the FO_Page object, you can get it from the paragraph ID using the following function, courtesy of Rick Quatro, posted to the Yahoo Framedev list. Send the paragraph (FO_Pgf) ID as oObj and it will return the page ID:
    F_ObjHandleT GetPage(F_ObjHandleT oDoc, F_ObjHandleT oObj)
    F_ObjHandleT oFrame = 0;
    IntT iObjType;
    F_ObjHandleT oRow, oCell;
    while(oObj)
    oFrame = oObj;
    iObjType = F_ApiGetObjectType(oDoc, oObj);
    switch(iObjType){
    case FO_SubCol:
    oObj = F_ApiGetId(oDoc, oObj, FP_ParentTextFrame);
    break;
    case FO_Tbl:
    oRow = F_ApiGetId(oDoc, oObj, FP_FirstRowInTbl);
    oCell = F_ApiGetId(oDoc, oRow, FP_FirstCellInRow);
    oObj = oCell;
    break;
    case FO_Row:
    oCell = F_ApiGetId(oDoc, oObj, FP_FirstCellInRow);
    oObj = oCell;
    break;
    case FO_Cell:
    // handle FO_Pgf case
    case FO_Pgf:
    // handle FO_AFrame case
    case FO_AFrame:
    oObj = F_ApiGetId(oDoc, oObj, FP_InTextFrame);
    break;
    // handle graphic object cases
    case FO_TextLine:
    case FO_TextFrame:
    case FO_UnanchoredFrame:
    case FO_Arc:
    case FO_Ellipse:
    case FO_Group:
    case FO_Inset:
    case FO_Line:
    case FO_Math:
    case FO_Polygon:
    case FO_Polyline:
    case FO_Rectangle:
    case FO_RoundRect:
    oObj = F_ApiGetId(oDoc, oObj, FP_FrameParent);
    break;
    default:
    // prevents loop if unknown object type is found.
    oObj = 0;
    break;
    if(oFrame){
    // Use FP_PageFramePage to get the page identifier of the object.
    return (F_ApiGetId(oDoc, oFrame, FP_PageFramePage));
    else
    return(0);
    Russ

  • Why can't I update to the latest version of iTunes on my pc?

    Why can't I update to the ltest itunes on my PC.  It won't recognize my iphone unless I do this.

    Hello there.
    The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Why can't I update to the latest itunes version? My computer says an error occured and that if the problem persists to load manually

    Why can't I update to the latest version of itunes. My computer tells me an error occured and if it happens again to load manually

    Had exactly same problem on iPad1. "Unable to check for update. An error occurred while checking for a software update".  Been getting this since 3/7/2012.  Apple support said probably server overload.  Checked these comments and found answer that worked.
    -- Reset device
        . Backup your iPhone/iPad to iCloud (very important). Settings>iCloud> Storage and Backup>Backup Now (at the bottom)
        . Erase your device.  Settings>General>Reset>Erase All Content And Settings
        .  Device will reset and wipe itself
        .  When it restarts follow the instructions on screen and setup your device.
            You're choices here do not really matter except for restoring From a  backup.
            Do not restore a backup, chose "Set up as new".
        .  When complete, the Software Update should now work which will install IOS 5.1
        .  When installed, Erase the device again (see Above).
        .  Once erased, follow the Wizard but this time select that you wish to restore from a backup
            In iCloud.  Select the backup that you took in first step.
         .  Your device should be back to normal and with IOS 5.1.
    This takes time to complete but it worked. Thanks to Glosdeveloper for this.  By the way this was an "over the air" update (as opposed to plugged in.

  • Database table not updating with the changes

    Hi friends,
                    Iam having a tablecontrol where iam gettting the data from the ztable for a particular key field.  When i change certain fields in the table control and when i click save, it should update the changes in the ztable.
       module save output.
       modify zslip_po1 from table x_po1_slip.
    here slpno is the key field.  if I change a field for a particular slpno it should update the changes for that slpno value only.
    but it is not updating the changes. although iam setting the slpno field dynamically.
    Please give me ideas.
    thanks and regards
    Murali Krishna T

    Hi,
    1. Have 2 Internal Tables, the first one must contain the original data(before change ) and the second one  contains the update data(after changed ie. table control data).
    2. loop the first table and read the data from the second table using index.
    3. inside the loop, compare the work area of both the internal table.
       if both are same, then no change was made to that particular record, so no need for updation
       if both are not same, then some changes were made on that record, so need to update.
    4. use modify command to update that particular record from the work area.
    i think in performance wise also this logic will be helpful, since we are updating only the changed record.
    since this is addon table, so i hope the no of records will also less, so no need to worry about loop.
    check with this, it may work out......
    thank you,
    SenthilPandi C
    Edited by: SenthilPandi ChandraSekaran on Feb 4, 2010 5:36 PM

  • TS3376 why wont it show me on the map where my phone was last located? and can am i able to bring it up?

    why wont it show me on the map where my phone was last located? and can am i able to bring it up?

    Welcome to the Apple Community.
    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

  • I just bought a new apple imac pro laptop. the did the updats at the store and put in a password for me.I got home and the password doesn't work.

    I just bought a new apple imac pro laptop. the did the updats at the store and put in a password for me.I got home and the password doesn't work.

    Resetting User Password in Lion, Mountain Lion & Mavericks
    Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • How to read the method and put that code in 1 internal table

    Hi,
    Actually in the normal ABAP, if we want to read the report,  then we will write read report statement.
    If we want to read method then this statement will not work.
    So, to read the method and put that code in 1 internal table , which statement we need to write?
    Regards,
    Radhika

    Hi Naimesh,
    Thanks for your reply.
    As, i am not aware of ABAP Objects i am having some issues:
    Actually that is working for some methods in some classes.
    Here 1 issue is there:
    In se24 1 method is there in 1 class.
    Even by using that FM in SE37 i am able to get the program name by giving class and method name,
    but while using that FM in the program i am not able to get that program name.
    so, i am unable to read the source code of the program?
    1 example here:
    Class name is CL_GUI_FRONTEND_SERVICES.
    in this class, methods like FILE_EXIST , FILE_GET_SIZE, etc are there.
    By giving the class name and method name i am able to get the program name also,
    but while using that FM in the program i am not able to get that program name.
    so, i am unable to read the source code of the program?
    Here is my code:
    REPORT  Z16059_SCAN_METHOD.
    DATA: BEGIN OF I_PROGRAM OCCURS 0,
          LINE(256) TYPE C,
          END OF I_PROGRAM.
    DATA METHOD TYPE PROGRAM.
    DATA: BEGIN OF I_STRUCTURE,
          CLS_NAME(30) TYPE C,
          METH_NAME(61) TYPE C,
          END OF I_STRUCTURE.
    I_STRUCTURE-CLS_NAME = 'CL_GUI_FRONTEND_SERVICES'.
    I_STRUCTURE-METH_NAME = 'CL_GUI_FRONTEND_SERVICES-FILE_EXIST'.
    CALL FUNCTION 'SEO_METHOD_GET_INCLUDE_BY_NAME'
      EXPORTING
      MTDKEY             =  I_STRUCTURE
    IMPORTING
       PROGNAME          = METHOD
    EXCEPTIONS
       INTERNALMETHOD_NOT_EXISTING      = 1
       OTHERS                             = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    READ REPORT METHOD INTO I_PROGRAM.
    Please help me out in this regard.
    Thanks & Regards,
    Radhika

  • ADF partial page updates fails after changing the JSESSIONID name

    Hi All.
    I'm using Human Task WorkFlow (11g, wls 10.3.4).
    I changed session-descriptor to WORKLISTAPPSESSIONID of woklistapp application and my deployed TaskFlow.
    After that ajax partial pages updates fails with java.lang.NullpointerExpcetion in the log.
    I think ajax based code does not use session-descriptor element (in the weblogic.xml) to determine the session id cookie name.
    And i cant find where and what i have to modify?
    Guys, please, help.
    Oleg.

    repost
    --

Maybe you are looking for