Why wont sound play though my TV using HDMI anymore?

Everything worked fine until the power went out one day. Now I can't get sound to play though my TV using my HDMI cable. I have tried fiddling with every setting there is to make it work on both my TV and my imac but nothing seems to work. When I open system preferences there is not any other options for output besides Internal speakers. The speakers on my TV work fine I have tested them. I've tried several different HDMI cables but nothing works. Why would everything work fine one day and then stop the next? was is because of the power outage? can I fix this myself?

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

Similar Messages

  • My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

    My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

    Hey Hype.Beast.187,
    Here are some troubleshooting steps for not being able to hear sound through your iPhone speakers. I'd pay special attention to steps 8, 9, and 10 in your situation:
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    All the best,
    David

  • When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

    When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
    If I use google it works. If I use Ichat, it works. If I use skype it works.

    This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
    Try turning down the speak volume (System Preferences->Sound->Output->Output Volume)  or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

  • Why wont my 2nd generation ipod touch turn on anymore ?

    why wont my 2nd generation ipod touch turn on ?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Why wont ipad play audio on a timeline?

    Why do you have to use sound.js to play an audio file on an Ipad with a click or touch event?
    Why cant I have audio on the timeline and have it play? It works on android tablets.

    Have you tried quitting the app and restarting the device - or tried a reset?
    Quit and restart
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Why no audio playing in this website using OSX ML 10.8.2 / FP 11.4.x

    Hi,
    I am trying to find out why this website does not play the audio streaming correctly on  Mac ML OSX 10.8.2 with Flash Player 11.4. (All Browsers are stuck all sound effect are playing well)
    It works fine on 10.5.8, with older flash player)
    The website address is www.quantika-sf.com Go to section "extrait" and try using the audio player...
    Does someone experience the same issue? Is there a security reason somewhere? Cannot find what's wrong in the site or in my os.
    Thanks,
    Eric

    Hi Eric,
    I've also been able to reproduce this issue with 10.8.2 and Flash Player 11.4 (and 11.5).  It appears that this stopped functioning between Flash Player 10.3 and 11.2.  I've verified that the play button is enabled in 10.3, but in 11.2 the button is disabled.  Because this appears to have changed a while back your best bet for a fix would be to enter a bug over at bugbase.adobe.com and then tell others about this issue so they can add their votes and comments.  It's possible that this could be worked around programmatically in ActionScript, but we'd need to see the code to get a better idea.
    Thanks,
    Chris

  • UK ITunes purchases, why wont they play in Germany

    Having recently moved from UK to Germany, I purchased AppleTV so I could download UK programmes and at least have something to watch which is not dubbed in German. I still have a UK bank account and still a UK address, which means I can still log into iTunes store in UK. Except……when I download anything, either through AppleTV or my Mac it will not play on my German TV. Worse, all my music, videos and TV shows which were already on my Mac, and all legally purchased from iTunes UK will not play either – format not recognised when I sync. Everything plays ok on my Mac, but I have a lovely white box that is of no use. Any ideas or am I just being stupid (and should just learn to speak German quicker)?

    doughob wrote:
    UK televisions do not work in Germany, picture is good, but the sound does not work
    hmm, i bought a TV in Singapore while working there. when i got back, the TV worked just fine ...
    in Germany everything is dubbed.
    i hate that fact, too - so much +get's lost in translation+. however, there is content in the German iTMS that is OV (or, @ least, is bilingual ). look out for this
    and this
    nevertheless, stuff you already have in your iTunes library should play fine, no matter where you are.
    may be a long shot, but try this:
    check if you have read & write permissions for your iTunes music folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. next, click on the little gear-shaped icon and +apply to enclosed items+ like so
    you may also give everyone read & write access. if this doesn't help, try the same on your iTunes folder (not just the iTunes music folder).
    any difference ?
    also, try de-authorizing your iTunes, then re-authorizing it.
    another consideration: when you linked up with the German iTMS, did you create a new iTMS account ?
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

  • Why wont music play on iphone 4

    I synced music to my iphone and it wont play.  it just skips over every song and the album art work looks all corupted and distorted.  i tried deleting it and re syncing it and it did the same thing.  i even deleted the music from itunes and re imported it from my cd and then put it back on my phone and still doesnt work.  any ideas?

    Try resetting your iPhone.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    If that doesn't fix it, restore your iPhone using iTunes.

  • Why no sound to TV when I use my mdport to HDMI Adapter?

    I have a 15" MBP (early 2011) model so I know  it has capabilities. I've read customer reviews that tell me to go to System Pref>Sounds> and then choose the HDMI, but i dont have that option. The only device available is the "Internal Speakers" Can anyone help me figure this out? Thanks!

    You need to tell us which MacBook Pro you have.  MBP's prior to the late 2009 models couldn't transmit sound. Later models require a specific brand of connector, though most current MBP's work with any adapter.  See this website for more information.

  • HT3775 why wont AVI play on my Mac

    the avi format wont play on my quicktime?

    You can download and install VLC, as mentioned above, for Free from this site:
                   http://vlc-media-player.en.softonic.com/mac

  • Why wont firefox play bambuser broadcasts & crash constantly

    constantly crashing, dragging, freezing completely.
    will not play ANY videos at bambuser.com
    nothing.
    none of the adblockers are working any more, am DELUGED with crap ads all the time.
    I feel like this has been hacked by the very company I've trusted for a long time.
    I am feeling very betrayed.

    Does this site use the flash plugin? Regarding the ads, have you checked for malware with other tools than the antivirus already installed on the system.
    You can try these free programs to scan for malware, which work with your existing antivirus software (scan with ALL programs as they may find malware differently):
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.

  • Why wont iphone play webcasts?? only shows mixed up words and characters!!!

    someone help my iphone 3g wont play webcasts. only youtube videos work no other form of video works through the internet on the phone. please help!

    http://discussions.apple.com/thread.jspa?threadID=2611037&tstart=0

  • Why wont sound for hp laptop turn on

    HP G72  Sound will not turn on. Started yesterday
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    Download the Realtek HD Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp49501-50000/sp49526.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the Realtek audio device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the Realtek installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    If you still have no audio, open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Start-up Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type',  select Automatic and click Apply to save the change.  Then click the Start button.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • WHy wont firefox play any videos except youtube?

    I cant watch videos anywhere but youtube!
    == URL of affected sites ==
    http://www.hulu.com, comedy central.com

    I cannot get BBC,IV or Channel 4,sound or vision.

  • Question--why wont it play????

    ok..so when i turned on my nano..i got a msg that said "disk mode" "ok to disconnect" which was weird cuz it wasnt connected to anything and the screen was frozen
    when i got home i reset and updated the ipod software
    now when i hit play..which i couldnt do before..it skips thru every song in my song list with no volume
    what the helll is up with that
    help
    mel

    thanks it finally worked..i had restored and updated the ipod 2x and the 3rd time 4 what ever reason it worked.
    mel

Maybe you are looking for

  • [SOLVED][Gnome 3.6] notification / notify bug - ONLY icons are shown

    Hi, since the upgrade from gnome 3.4 to 3.6, the notify notifications at the bottom only show the icon associated to the notification, and nothing else (the background/text just my browser showing some text from an arch wiki site...) : The screenshot

  • Can we install Best Practice for Fabricated Metals V1.604 on ECC 6.0 EHP5

    Hi Expert Team, We are planning to implement Best Practice for Fabricated Metals V1.604 on ECC 6.0 environment. We are on ECC 6.0 EHP5, but the SAP installation document mentions to install Fabricated Metals V1.604 on ECC 6.0 with EHP4. Also I dont t

  • Label graphics script in CS2?

    does anyone know if the LabelGraphics script for CS3 can be modified for use in IDCS2? Any hints on how to do it? Thanks jon

  • Not Using All CPUs

    Does anyone know why Premiere Pro CS6 (Windows) is only using 4 CPUs when I have 24 on my Mac Pro? I am running Windows 7 Professional on Bootcamp. I have 48GB of RAM. I am importing JPEGs stills and creating a sequence but it is moving very slow. Th

  • Getting the AV chat to work

    I can log into ichat just fine (using my aim s/n i don't have an .mac account) but anytime i try to start an av chat it comes back saying that it failed because I didn't respond...I've tried everything and can't figure out what to do...if anyone has