Why wont this post???????????????

Using JSC2-1, deploying in appserver 8.2 or 9, INtell based system running windows XP
I have an application that dynamically generates a grid within the session bean based on user input parameters.
When I run the program within the IDE (appserver 8.2) the grid is displayed properly.
When I deploy the program to either of the 8.2 or 9 appservers, the grid is not displayed.
Can anyone explain why I can run program in IDE and it works correctly, but not in the appserver???
What makes it even strangr, is I have three pages that display dynamic grids.
All were copied from a separate probram and cloned to work in this environmment.
Two of the three dynamically generated grids do not disoley when deployed, but one does. All three display in the development IDE (jsc2).
How can this happen?
I have another application that does basically the same thing and all dynamically generated grids perform the same in the IDE and on the server (Sun appserver 8.2).
Any clue may be helpful.

hopefully i can put this thread to bed flashed back to 1.e(1.14) and pc running ok with 16 gig og memory.i am not sure if it was the bios downgrade or the change of keyboard (msoft 3000 wired office) but i`m happy as larry again ,i only have one issue with the 1.14 bios and that is it dont like my m/soft sidewinder mouse as it only moves up and down but i have a replacement ready,,,,,,so thanks to all for all the patience in dealing with my problem and happy xmas to all

Similar Messages

I have an ipod touch and now it doesnt sync properly. It gets to stage 1 of 3 of syncing( Which is 'backing up') Then it stops and itunes closes. Why wont this sync and what can I do about it?

I have an ipod touch and now it doesnt sync properly. It gets to stage 1 of 3 of syncing( Which is 'backing up') Then it stops and itunes closes. Why wont this sync and what can I do about it?

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Restart the Computer. This sometimes happens to me when I keep my Windows 7 on Sleep, and I try to sync my Ipod
Make sure you have the latest version of Itunes
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

Why wont this Macro work with my custom watermarks, but finds the built-in building blocks from office 2010?

Option Explicit
Sub BatchProcess()
Dim strFileName As String
Dim strPath As String
Dim oDoc As Document
Dim oLog As Document
Dim oRng As Range
Dim oHeader As HeaderFooter
Dim oSection As Section
Dim fDialog As FileDialog
Set fDialog = Application.FileDialog(msoFileDialogFolderPicker)
With fDialog
.Title = "Select folder and click OK"
.AllowMultiSelect = False
.InitialView = msoFileDialogViewList
If .Show <> -1 Then
MsgBox "Cancelled By User", , _
"List Folder Contents"
Exit Sub
End If
strPath = fDialog.SelectedItems.Item(1)
If Right(strPath, 1) <> "\" _
Then strPath = strPath + "\"
End With
If Documents.Count > 0 Then
Documents.Close savechanges:=wdPromptToSaveChanges
End If
Set oLog = Documents.Add
If Left(strPath, 1) = Chr(34) Then
strPath = Mid(strPath, 2, Len(strPath) - 2)
End If
strFileName = Dir$(strPath & "*.doc?")
While Len(strFileName) <> 0
WordBasic.DisableAutoMacros 1
Set oDoc = Documents.Open(strPath & strFileName)
'Do what you want with oDoc here
For Each oSection In oDoc.Sections
For Each oHeader In oSection.Headers
If oHeader.Exists Then
Set oRng = oHeader.Range
oRng.Collapse wdCollapseStart
InsertMyBuildingBlock "ASAP 1", oRng
End If
Next oHeader
Next oSection
'record the name of the document processed
oLog.Range.InsertAfter oDoc.FullName & vbCr
oDoc.Close savechanges:=wdSaveChanges
WordBasic.DisableAutoMacros 0
strFileName = Dir$()
Wend
End Sub
Function InsertMyBuildingBlock(BuildingBlockName As String, HeaderRange As Range)
Dim oTemplate As Template
Dim oAddin As AddIn
Dim bFound As Boolean
Dim i As Long
bFound = False
Templates.LoadBuildingBlocks
For Each oTemplate In Templates
If InStr(1, oTemplate.Name, "Building Blocks") > 0 Then Exit For
Next
For i = 1 To Templates(oTemplate.FullName).BuildingBlockEntries.Count
If Templates(oTemplate.FullName).BuildingBlockEntries(i).Name = BuildingBlockName Then
Templates(oTemplate.FullName).BuildingBlockEntries(BuildingBlockName).Insert _
Where:=HeaderRange, RichText:=True
'set the found flag to true
bFound = True
'Clean up and stop looking
Set oTemplate = Nothing
Exit Function
End If
Next i
If bFound = False Then 'so tell the user.
MsgBox "Entry not found", vbInformation, "Building Block " _
& Chr(145) & BuildingBlockName & Chr(146)
End If
End Function
This works, using the ASAP 1 watermark that is in bold. ASAP 1 is a built-in building block, if i just rename this to ASAP, but save it in the same place with buildingblocks.dotx it wont work. What do i need to do to be able to use this with my custom building
blocks?

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, this issue is related to Office DEV, please post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Questions, Extreme begginer - Why wont this work.

/* My Java Program
Failing To Compile 2009 - CurrentDate()
/* Importing */
import java.util.Scanner;
import acm.graphics.*;
import acm.program.*;
class run {
     public static void main(String args[]){
     //Variables
     Scanner ninjatext = new Scanner(System.in);
     Scanner Clarinet_Request = new Scanner(System.in);
     System.out.println(ninjatext.nextLine());
     double pye, var1, ans;
     String yodawg;
     var1 = 2;
     pye = 3.14;
     yodawg ="I heard you like saxaphones ";
     ans = var1/pye;
          System.out.println("Hello Cruel World?");
          System.out.print(yodawg);
          System.out.print("So i bought you ");
          System.out.print(ans);
          System.out.println(" Saxxes");
          System.out.println("So How many Clarinets Would you like????");
          System.out.println("Enter Number::");
          System.out.println("So " + Clarinet_Request.nextLine() + " Is how many clarinets You would like? Cool");
     /*Please end up working*/
     // Declaring Variables Semi-Randomly Works, Right?
     String test1 = "Ok i hope this works";
     int test2 = 10;
     double test3 = 4.9;
     int test4 = test2/test3; //Random Weird Awnser right???
     System.out.println(test2 + "Divided by" + test3 + "Is Equal To" + test4);
     /* This all should work, at least in theory.... But it wont right? */
     /** What have i gotten myself into? Oh well it sounds like it should work */
     Console console = System.console();
     String username = console.readLine("Lets Do This?: ");
     if (/* String? */username == "yes" || "Yes" || "YES"){
          testingthiscrap LeroyJenkins = new testingthiscrap
          LeroyJenkins.LetsDoThis()
     /* Guaranteed to not work */
public class testingthiscrap extends GraphicsProgram {
     /** Runs the program */
     public void LetsDoThis() {
          GRect rect = new GRect(100, 50, 100, 100 / PHI);
          rect.setFilled(true);
          rect.setColor(Color.RED);
          add(rect);
          GOval oval = new GOval(150, 50 + 50 / PHI, 100, 100 / PHI);
          oval.setFilled(true);
          oval.setColor(Color.GREEN);
          add(oval);
/** Constant representing the golden ratio */
     public static final double PHI = 1.618;
/* Standard Java entry point */
/* This method can be eliminated in most Java environments */
     public static void main(String[] args) {
          new FeltBoard().start(args);
     }//If anything i just typed i now feel heroic.
     // public static void
     Ok, sorry if the titles not good enough but i am a php programmer between begginer and intermediate but who wants to know java so i can say write a applet or something that can run from the desktop directly, also i wanted to lean OO and it in php confuses me infinately so i decided in the context of knowing nothing i might pick it up better thus java.
So most of what im doing is confusing to me so i just tried to type some code (Well the first 20 maybe lines i compiled and tested but after that i couldnt test so i just ran with it. Today i tried to compile and poof, nothing.
Any clues what im doing wrong and what i should do instead?
BTW this stuff feels weird, i feel like to take imput it should have a html form or something. I dunno.
also i dont even seem to have these acm packages im trying to import, any clue why?

jman888 wrote:
Ok, sorry if the titles not good enough but i am a php programmer between begginer and intermediate but who wants to know java so i can say write a applet or something that can run from the desktop directly, also i wanted to lean OO and it in php confuses me infinately so i decided in the context of knowing nothing i might pick it up better thus java. Ok?
So most of what im doing is confusing to me so i just tried to type some code (Well the first 20 maybe lines i compiled and tested but after that i couldnt test so i just ran with it. Today i tried to compile and poof, nothing.I assume you got a compile time error, if so next time you post a question incorporate this piece of information.
Any clues what im doing wrong and what i should do instead?I can take a stab at your code.
BTW this stuff feels weird, i feel like to take imput it should have a html form or something. I dunno.One step at a time
String yodawg;
yodawg ="I heard you like saxaphones ";This is not an error but plain weird IMHO, if you are declaring a variable then initializing it, you might as well do it all on one line.
if (/* String? */username == "yes" || "Yes" || "YES"){
testingthiscrap LeroyJenkins = new testingthiscrap
LeroyJenkins.LetsDoThis()
}This code will not compile and should produce one of possible many compiler errors. The condition inside the if statement requires each condition to be independent of one another. e.g. (username == "yes" || username = "Yes" || username == "YES").
This also represents one of the most common errors presented to new comers. Equivalence of Objects such as Strings are compared using a method .equals() and not the term "==". The latter actually compares two Strings by the address stored in memory.
class runBy convention all Class names begin with a capital letter
Also it appears that the class run contains main method and an inner class in which itself contains a main method. I will conclude right here that you are biting off far more then you can chew. Start with the basics, e.g. Google for Java tutorials and start from "hello world" then make your way from there. Tackle one problem at a time and learn the concepts of the tutorial which will hopefully stay with you, as these fundamental concepts will be your foundation to development using the Java language.
Mel
Edited by: Melanie_Green, apparently CODE tags don't like me tonight

Why wont this script work???

Hi,
I have previously used this script to make a portrait scroll bar which works perfectly, however i have altered the script to work in a landscape scroll bar by altering the x and y axis and switching out the height for width. However a part of it wont work...The left and right arrows work correctly however the scroll bar does not move and I can not for the life of me figure out why.
Does anyone have any ideas as to what ive missed or done wrong?
Thanks in advance
scrolling = function () {
var scrollWidth:Number = scrollTrack._width;
var contentWidth:Number = contentMain._width;
var scrollFaceWidth:Number = scrollFace._width;
var maskWidth:Number = maskedView._width;
var initPosition:Number = scrollFace._x=scrollTrack._x;
var initContentPos:Number = contentMain._x;
var finalContentPos:Number = maskWidth-contentWidth+initContentPos;
var left:Number = scrollTrack._y;
var top:Number = scrollTrack._x;
var right:Number = scrollTrack._y;
var bottom:Number = scrollTrack._width-scrollFaceWidth+scrollTrack._x;
var dy:Number = 0;
var speed:Number = 10;
var moveVal:Number = (contentWidth-maskWidth)/(scrollWidth-scrollFaceWidth);
scrollFace.onPress = function() {
var currPos:Number = this._x;
startDrag(this, false, left, top, right, bottom);
this.onMouseMove = function() {
   dy = Math.abs(initPosition-this._x);
   contentMain._x = Math.round(dy*-1*moveVal+initContentPos);
scrollFace.onMouseUp = function() {
stopDrag();
delete this.onMouseMove;
btnUp.onPress = function() {
this.onEnterFrame = function() {
   if (contentMain._x+speed<maskedView._x) {
    if (scrollFace._x<=top) {
     scrollFace._x = top;
    } else {
     scrollFace._x -= speed/moveVal;
    contentMain._x += speed;
   } else {
    scrollFace._x = top;
    contentMain._x = maskedView._x;
    delete this.onEnterFrame;
btnUp.onDragOut = function() {
delete this.onEnterFrame;
btnUp.onRelease = function() {
delete this.onEnterFrame;
btnDown.onPress = function() {
this.onEnterFrame = function() {
   if (contentMain._x-speed>finalContentPos) {
    if (scrollFace._x>=bottom) {
     scrollFace._x = bottom;
    } else {
     scrollFace._x += speed/moveVal;
    contentMain._x -= speed;
   } else {
    scrollFace._x = bottom;
    contentMain._x = finalContentPos;
    delete this.onEnterFrame;
btnDown.onRelease = function() {
delete this.onEnterFrame;
btnDown.onDragOut = function() {
delete this.onEnterFrame;
if (contentWidth<maskWidth) {
scrollFace._visible = false;
btnUp.enabled = false;
btnDown.enabled = false;
} else {
scrollFace._visible = true;
btnUp.enabled = true;
btnDown.enabled = true;
scrolling();

sorry should have said...its the aspect relating to "scrollFace" which is mentioned throughout..ive marked it out in bold and taken out anything unrelivant.
Thanks
So its:
scrolling = function () {
var scrollFaceWidth:Number = scrollFace._width;
var initPosition:Number = scrollFace._x=scrollTrack._x;
var bottom:Number = scrollTrack._width-scrollFaceWidth+scrollTrack._x;
var moveVal:Number = (contentWidth-maskWidth)/(scrollWidth-scrollFaceWidth);
scrollFace.onPress = function() {
var currPos:Number = this._x;
startDrag(this, false, left, top, right, bottom);
this.onMouseMove = function() {
   dy = Math.abs(initPosition-this._x);
   contentMain._x = Math.round(dy*-1*moveVal+initContentPos);
scrollFace.onMouseUp = function() {
stopDrag();
delete this.onMouseMove;
btnUp.onPress = function() {
this.onEnterFrame = function() {
   if (contentMain._x+speed<maskedView._x) {
   if (scrollFace._x<=top) {
     scrollFace._x = top;
    } else {
     scrollFace._x -= speed/moveVal;
    contentMain._x += speed;
   } else {
    scrollFace._x = top;
    contentMain._x = maskedView._x;
    delete this.onEnterFrame;
btnDown.onPress = function() {
this.onEnterFrame = function() {
   if (contentMain._x-speed>finalContentPos) {
   if (scrollFace._x>=bottom) {
     scrollFace._x = bottom;
    } else {
     scrollFace._x += speed/moveVal;
    contentMain._x -= speed;
   } else {
   scrollFace._x = bottom;
    contentMain._x = finalContentPos;
    delete this.onEnterFrame;
if (contentWidth<maskWidth) {
scrollFace._visible = false;
btnUp.enabled = false;
btnDown.enabled = false;
} else {
scrollFace._visible = true;
btnUp.enabled = true;
btnDown.enabled = true;

Why wont this RUN and Set a New-Service..?

PS C:\WINDOWS\system32> New-Service -Name RunSafe -BinaryPathName C:\Users\3steveco33_01\Skydrive\Documents\Adminstartup.ps1
-DisplayName 'Active Protraction Service' -Description Safety and Security -StartupType Manual -Credential 'Admin_01' -Depen
New-Service-NameRunSafe-BinaryPathNameC:\Users\3steveco33_01\Skydrive\Documents\Adminstartup.ps1-DisplayName'*******
********** ******* '-DescriptionSafetyandSecurity-StartupTypeManual-Credential'Admin_01'-DependsOnSystem
dsOn System
New-Service : A positional parameter cannot be found that accepts argument 'and'.
At line:1 char:1
+ New-Service -Name RunSafe -BinaryPathName C:\Users\3steveco33_01\Skydrive\Docume ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [New-Service], ParameterBindingException
+ FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.PowerShell.Commands.NewServiceCommand
As can be plainly seen here there is no positional paraaaaameter with the argument and as indicated in the error message...WTF
s.mcknight
As can be plainly seen here there is no positional paraaaaameter with the argument and as indicated in the error message...WTF It work yesterday...I deleted it last night with a successful operation message and today this....it is more than frustrating....I
am clever, tenacious and persistent...and this one now has me stumped...!

Hi S.mcknight,
It seems you have solved this issue, if there is anything else regarding this iisue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Why wont this jar execute (one way fine, the other is not)

Without using a executable jar this works fine:
java.exe -classpath myproject\classes;lib1.jar;lib2.jar;lib3.jar MyMainClass
MyMainClass is my target class stored in myproject\classes
I make an executable jar called Project.jar (basically all content in myproject\classes with usual manifest file containing target class) and then try
java.exe -classpath lib1.jar;lib2.jar;lib3.jar -jar Project.jar
This does not work and gives error:
Exception in thread "main" java.lang.NoClassDefFoundError: org/springframework/beans/factory/InitializingBean
The class org/springframework/beans/factory/InitializingBean is contained in lib1.jar
I must be missing something fundamental about creating executable jars?? Any ideas or pointers?

I've simplified my problem so someone could help me please!!!!
The following runs fine:
java -cp .;Model.jar TestThe following fails:
java -cp .;Model.jar -jar Test.jarException in thread "main" java.lang.NoClassDefFoundError: Model at Test.main(Test.java:8)
Model.jar contains one class model.Model.class
Test.jar contains one class Test.class plus manifest file. The Test class simple does the following:
import model.Model;
public class Test
public static void main(String[] args)
    System.out.println("Start");
    Model model = new Model();
    System.out.println("End");
}Any ideas why?

Why wont this print good info?

Can someone explain to me why this output doesn't print correctly? Is it because I am crossing classes or something?
Output:
Cup@82ba41Cup@923e30Cup@130c19bCup@1f6a7b9Cup@7d772eCup@11b86e7Cup@35ce36Cup@757aefCup@d9f9c3Cup@9cab16
BUILD SUCCESSFUL (total time: 0 seconds)
* Cup.java
* Created on May 23, 2007, 10:12 AM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Pete Berardi
public class Cup {
    private String cupSize;
    private String cupMaterial;
    public static final int LARGE = 1;
    public static final int SMALL = 0;
    public static final int PAPER = 2;
    public static final int PLASTIC =3;
    private int sizeCode;
    private int materialCode;
    /** Creates a new instance of Cup */
   public Cup(String cupSize, String cupMaterial){
   this. cupSize = cupSize;
   this.cupMaterial = cupMaterial;
   if(cupSize.equals("large"))
      sizeCode = LARGE;
   else
      sizeCode = SMALL;
   if(cupMaterial.equals("plastic"))
       materialCode = PLASTIC;
   else materialCode = PAPER;
}

something like this gives me decent output
public String toString()
         return      "Cup Size      : "+cupSize+"\n"+
                   "Size Code     : "+sizeCode+"\n"+
                   "Cup Material : "+cupMaterial+"\n"+
                   "Material Code : "+materialCode+"\n";
    }

Why wont this Plist run at login?

typing this in manually in terminal works fine:
/opt/local/bin/daemondo --label=thin --start-cmd /usr/local/bin/thin start -s 3 -C /etc/thin/thin.yml --pid=none
I've tried loading the plist in both /Library/LaunchDaemons/ and ~/Library/LaunchAgents. (sudo launchctl load -w /paths/mentioned -- however I get launchctl: Dubious ownership on file (skipping) -- so I use sudo launchctl load -F for ~/Library/LaunchAgents/thin.plist).
Neither seem to work.
Here's the plist on pastebin.
http://pastebin.ca/922156
Please tell me what is wrong with it -- I'm losing my sanity.

if including these program arguments are giving you a headache, how about making a simple executable script (permissions 755) that reads
#!/bin/sh
/opt/local/bin/daemondo --label=thin --start-cmd /usr/local/bin/thin start -s 3 -C /etc/thin/thin.yml --pid=none
exit 0
then making your plist refer to the full path name to the above script, with no program arguments necessary?
See if manually launching the new script does what you want, then doublecheck that the script's permissions are 755 and that ownership and group affiliation are correct. The plist, as gnarlodius has said, should be 644.
Question: do you want this to run at system boot-up or reboot, or at user login? That determines in which LaunchDaemons or LaunchAgents directory that the plist belongs, as well as influence your choice of path to the script. Will also affect your choice of ownership and group affiliation or what user/group the plist should execute the script as.

Why wont this work as an applet??

import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.SQLException;
import java.applet.*;
* This class creates a Swing GUI that allows the user to enter a SQL query.
* It then obtains a ResultSetTableModel for the query and uses it to display
* the results of the query in a scrolling JTable component.
public class QueryFrame extends JApplet {
ResultSetTableModelFactory factory; // A factory to obtain our table data
JTextField query; // A field to enter a query in
JTable table; // The table for displaying data
JLabel msgline; // For displaying messages
public void init(ResultSetTableModelFactory f) {
     this.factory = f;
     // Create the Swing components we'll be using
     query = new JTextField(); // Lets the user enter a query
     table = new JTable(); // Displays the table
     msgline = new JLabel(); // Displays messages
     // Place the components within this window
     Container contentPane = getContentPane();
     contentPane.add(query, BorderLayout.NORTH);
     contentPane.add(new JScrollPane(table), BorderLayout.CENTER);
     contentPane.add(msgline, BorderLayout.SOUTH);
     // Now hook up the JTextField so that when the user types a query
     // and hits ENTER, the query results get displayed in the JTable
     query.addActionListener(new ActionListener() {
          // This method is invoked when the user hits ENTER in the field
          public void actionPerformed(ActionEvent e) {
          // Get the user's query and pass to displayQueryResults()
          displayQueryResults(query.getText());
* This method uses the supplied SQL query string, and the
* ResultSetTableModelFactory object to create a TableModel that holds
* the results of the database query. It passes that TableModel to the
* JTable component for display.
public void displayQueryResults(final String q) {
     // It may take a while to get the results, so give the user some
     // immediate feedback that their query was accepted.
     msgline.setText("Contacting database...");
     // In order to allow the feedback message to be displayed, we don't
     // run the query directly, but instead place it on the event queue
     // to be run after all pending events and redisplays are done.
     EventQueue.invokeLater(new Runnable() {
          public void run() {
          try {
               table.setModel(factory.getResultSetTableModel(q));
               msgline.setText(" ");
          catch (SQLException ex) {
               // If something goes wrong, clear the message line
               msgline.setText(" ");
               // Then display the error in a dialog box
               JOptionPane.showMessageDialog(QueryFrame.this,
               new String[] { // Display a 2-line message
                    ex.getClass().getName() + ": ",
                    ex.getMessage()
public static void main(String args[]) throws Exception {
     // Create the factory object that holds the database connection using
     // the data specified on the command line
     ResultSetTableModelFactory factory =
new ResultSetTableModelFactory("sun.jdbc.odbc.JdbcOdbcDriver", "jdbc:odbc:InvoiceExpress_Metso", "sa", "Imagon");
     // Create a QueryFrame component that uses the factory object.
     QueryFrame qf = new QueryFrame(factory);
     // Set the size of the QueryFrame, then pop it up
     //qf.setSize(500, 600);
     //qf.setVisible(true);
}

It won't, you have the main method, u have an application in the making, to turn it to an applet do the following:
1- remove the Main method
2- add init() method
Thanks

Why wont this work??

ive downloaded garage band, but when i try to open it it says i have no valid instrument library folder.... am i supposed to make one? why dont i have one?

Which os system do you have? Garage Band is part of the iLife package and came preinstalled on Mac when Tiger first came out. The application GB package is on the system disc that comes with all Macs. Where did you download it from?

Why wont this update??Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706)

Everytime windows update downloads this it fails.
Solved!
Go to Solution.

Download for SQL express SP3
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

HT1947 why wont this download to my ipon which has 4.2.1 update?

the application says cannot uplaod because ipod is not up to date
i have 4.2.1

The Apple Remote app requires iOS 4.3 or later. If your iPhone is 3G the app won't run on your device. If your iPhone is 3GS or newer update your iOS.
Hope that helps.

I uploaded the giftcard money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

i put money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

If you still have your old card listed on your account then try selecting the 'none' option and remove it and then try entering the card's details from scratch. If that doesn't work then what is the full error message that you are getting, and the card is registered to the same name and address (including format and spacing) that you have on your iTunes account ?

Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now e

Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now even the older "option+letter" doesn't work in most places.

Chrome doesn't support the new accent/diacritics/macron chooser. I'm not sure about other browsers such as Firefox. You can use the old Option+letter combination that Doug suggested. Hopefully updates will solve these little incompatibilities shortly.
Neill

Why wont this post???????????????

Similar Messages

Maybe you are looking for