Why would a 21 minute video only show up as a partial clip in project panel and timeline?
When I import uncompressed AVI file (21 minutes long) into project panel, it shows up as 4 seconds and 18 frames in length. Clip shows the full 21 minutes long in bridge and windows media player. I have rebooted computer and checked for updates. Also shows up as a shorter clip in After Effects. Any ideas?
General
Complete name : E:\3_20\1st.avi
Format : AVI
Format/Info : Audio Video Interleave
Format profile : OpenDML
File size : 33.5 GiB
Duration : 21mn 33s
Overall bit rate : 223 Mbps
Video
ID : 0
Format : RGB
Codec ID : 0x00000000
Codec ID/Info : Basic Windows bitmap format. 1, 4 and 8 bpp versions are palettised. 16, 24 and 32bpp contain raw RGB samples
Duration : 21mn 33s
Bit rate : 221 Mbps
Width : 640 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate : 30.000 fps
Bit depth : 8 bits
Bits/(Pixel*Frame) : 23.999
Stream size : 33.3 GiB (99%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Codec ID/Hint : Microsoft
Duration : 21mn 32s
Bit rate mode : Constant
Bit rate : 1 411.2 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Stream size : 217 MiB (1%)
Interleave, duration : 250 ms (7.50 video frames)
Yes the clip itself is only as long as the info in the project panel when I drag it to the timeline, about 4 minutes
Similar Messages
-
I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further. When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search". The folder at the top does say "Actions". How do I get more effects? The tutorials that I've checked into all show a long list of effects in their box. Can anyone help?
To use the existing actions, try the following:
1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
2. Then click on the name of the Action, in this example Faded Ink is the Action name.
3. Then press the Play button to run the action. -
why would it state under the "more about this mac" that i already have10.8.3 and then in the app store say i need to "resume" do you know what i mean? is it possible i already did download mountain lion entirely once? I am confused and don't want it twice
This is cause by the way the App Store checks to see if an application is installed on your system.
Basically when an app is installed it is in the Applications folder and this is where the MAS looks for them. So it looks at your purchase history for the apps you bought and looks in the Applications folder to see if they are installed. If an app is in your purchase history but not in the Applications folder the MAS says you need to install it.
For normal apps this works fine but the OS doesn;t install into the Applications folder. So the MAS sees you have Mountain Lion in your purchase history but it's not in the Applications folder and so it says you need to download it.
Hopefully one of these days Apple wil fix this.
regards -
Question
I opened my computer and the whole top only shows web search, I can not find my bookmarks and I tried reloading firefox and still nothing but tab bar. Tried f10, alt, nothing! Can I reload an old firefox? There is no firefox logo at top. When I rt click at top I see hide toolbar and leave full screen. To the right there is only a home sign. How can I get my BOOKMARKS ??????? I so need them and hate what ever this is that now shows up on firefox.The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Why do the new maps in ios6 show many wrong English translastions about Hong Kong streets and buildings?
TL/DR If your item has not arrived from Asia by 30 days after cleared payment, go to the Resolution Centre and open an Item Not Received Claim. If the seller cannot prove delivery, you will be refunded.
-
Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Video only shows my desktop.. why?
Hello, I can't seem to figure this out and its probably going to be something stupid but when I connect to a video chat with my friend I can see him but on his end it only shows my desktop screen. Every option seems to be checked correctly can someone tell me if i'm missing something. The camera is facing me and shows its on but again all it shows to my friend at the other end is a shot of my desktop. Thanks for you help.
Particularly if you downloaded the Trial of that one and it is Out of Date.
7:38 PM Sunday; May 18, 2008 -
Why is my 40 minute long imovie video showing to be 22.9 gb in total if i go into.... all my files.... there are extra clips there and when i delete any of them it deletes my source clip. I think the video should be about 9gb
Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated. -
Mini DV to Video only shows in black and white
I bought a mini dv to video from an apple shop so that i could watch films on my tv. I connected it to my tv at home and it worked perfectly, but when i try to connect it to my parents tv it only shows in black and white... both tvs are of roughly the same age...I'm connecting the yellow wire to the scart on the back of the tv to the yellow socket on the adapter
how come it works on one tv and not the other one?When you press the INPUT button on the remote to cycle through the inputs, is "ColorStream HD" listed? Is "Video" listed?
The Xbox is connected using 5 cables, correct? Red, blue, green, white, and red?
- Peter -
TS3376 Why would my iphone start beeping loud showing a FIND MY PHONE
My phone randomly went off last evening beeping very loud. It had a message stating "FIND MY PHONE" or LOCATE PHONE.. Why would it go off all by itself? I cannot seem to find any information on this out on the web. Anyone know what happend or why?
I did recieve an email that said" SOUND PLAYED ON NIKKI'S PHONE" then listed the date and time it happend.
Thank you!Welcome to the Apple Community.
That would be because someone has activated the Find My Phone alert from another device or from iCloud.com feature using your Apple ID. -
I use StumbleUpon and created many folders for different categories of Bookmarks. When I try to bookmark a new site, the bookmarks menu only shows about four or five of the folders. Is there some way to show the others? I would like to see a list of ALL the folders when I try to make a new bookmark, and I can't find anything on your Help Pages about this issue.
Thank youTry the Add Bookmark Here ² extension:
https://addons.mozilla.org/en-US/firefox/addon/3880 -
I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?
iPad is in Recovery mode.
Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start. -
Why would I repeatedly receive a download error message when memory is sufficient?
Uh, maybe it's a server problem, and unrelated to you or your device?
-
I updated I tunes today , now I am unable to open my I Pod I Touch, the screen shows the I Tunes logo with a USB cord and arrow pointing back up to the icon, can't access my Home page
The screen indicates that your device is in recovery mode. It has to be restored by connecting it to a computer with itunes. Restore to factory settings.
This happens sometimes. Hopefully you have a backup.
HTH -
I can't play videos (you tube for example) except in full screen mode. The audio works in either, but the video doesn't load or run in the normal you tube web site.
Any help would be greatly appreciated.
Thanks
Also, the error console shows all sorts of different errors. Though, alot of error parsing values.Do you have any Mail plug-ins? In particular, do you
have any plug-ins installed on one computer but not
the other? In the Finder, go to each of the following
folders (if they exist). What do you see there?
/Library/InputManagers/
Not Found
/Library/Mail/Bundles/
Not Found
~/Library/InputManagers/
Smart Crash Reports Folder / Smart CrashReports.bundle
~/Library/Mail/Bundles/
MailRecent.mailbundle
> I have a number of Mail Rules in
place which place messages
of certain topics in specific Smart
Mailboxes
This doesn’t make sense to me. You cannot tell a rule
to move messages to a smart mailbox, only to a normal
mailbox. Each smart mailbox has its own set of
conditions that messages must satisfy in order for
them to appear there.
OK. I misstated this. I have a number of Smart Mailboxes with their specific rules in which to route certain topics to specify mailboxes. I am trying to not have to create each Smart Mailbox on each computer.
The problem is that when I am on the road I add contacts, bookmarks, keychain items, contacts into my laptop and vice versa when home. I would just like to have those Sync on both computers. Seems like it should be easy, but it hasn't been.
I really don't think I have anything "non-standard." A few Smart Mailboxes, a couple of signatures, thats pretty much it.
Note: For those not
familiarized with the ~/ notation, it refers
to the user’s home folder. You can easily locate any
of the folders referred to in this post by copying
the folder path here, doing Go > Go to Folder
in the Finder, and pasting the folder path
there.
Maybe you are looking for
-
External hard drive does not work
I bought an external USB hard drive. At first, it worked. I could see an icon on my desktop and could load some stuff onto it. Then I unplugged it (probably the wrong way, I just unplugged it) and when I replugged it, I could not see the icon anymore
-
Launch application like "word"
Hello all, I have build an intranet with resin2.0.16 and JDK1.3. And in this intranet i want to launch application on client PC. I can run any application for the moment but only in the web server. Is it possible to run application on the client pc ?
-
For Firefox 8.0 send images only sends a link & slashy will not download
I have just downloaded Firefox 8.0 and I use photos from all over the web. Every time I use one and right click to send to Outlook the photo comes over to Outlook only as a link. I read that images with /'s do not load and to download Slashy. I tried
-
Taking impdp using network_link
HI PPl, Am stuck in a very difficult situation.. Can you please tell me is it possible to take an import from a database which is open in READ-ONLY mode, and i am going to use the impdp utility and network_link (syntax) and connect to readonly databa
-
Need to keep relaunching Mail to work with Network Solutions IMAP
The problem: Mail on my MacBook Pro will successfully download e-mail from my Network Solutions IMAP account once, but then if I want to check for mail in that account again, I have to quit Mail and relaunch it. The problem is only with the Network S