Why would a user have limited access to file sharing
I just upgraded to Mavericks and server 3. But now users can't log in. I look at the "access to server" option for the user and it shows this (see screen capture included here )
I tested all this out on a testing server, but not with these specific accounts. This is simply an upgrade from 10.8.5 to Mavericks.
Running a MacMini server. 2.6 GHz i7 processor. 16GB ram.
Your help is appreciated.
Thank you for the idea. given our time constraints we've decided to head back to 10.8.5 and deal with things later, possibly much later. Though I had failed to remember Maverick's switch to preferring SMB. Though one would think that type of thing is covered in the upgrade automatically.
In the end, the sharing thing did work itself out, but the users couldn't log in and when I went to change a password for a user, the button to accept the password change would do nothing, it'd just sit there with the new password typed into the two boxes and the button was useless. Since you have to click out of that box to do anything else I had to force quick server.app and that's when I decided it was too buggy to mess with and I'd just go back to what I know and almost trust.
K
Similar Messages
-
Resetting the Registry so other Users have full access to Flash Player 9
Does anyone have a solution for fixing the registry after
installing FP9, so all users can have full access to it.
I found this site
http://www.donglefree.com/toppage1.htm
to fix the installation problem, (and it worked perfectly),
but now all other users have limited access to the Flash Player.
(Some sites still say Flash needs to be installed).
Operating System: Windows XP Home Edition, SP1, Internet.
Exp. Version 6.0.2800.1106.xpsp2.050301-1526
Any help would be appriciated.Has anyone tried this to fix the registry problem?
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19148 -
When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.
The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update. -
Why would certain users not be able to open a mail to url from a Flash swf on my website?
Why would certain users not be able to open a mail to url from a Flash swf on my website?
1. Because they're using Android or iOS and can't see the Flash container.
2. Because they have Flash Player, but NOT Shockwave, which works for Interactive content like games and links in Flash containers.
3. ActiveX controls are blocking Flash content in IE.
4. Any of about a dozen other things.
As a web desginer since 2003, I can tell you that these days, it's a terrible idea to have Flash content in a website (outside of games that require it). Video should be HTML5. Navigation, content and other links should be HTML, CSS and/or Javascript ONLY, because placing them in a Flash container makes them invisible to literally half of your viewers or more, since SmartPhones can't and don't see Flash, and tablets don't either without special browsers, which may or may not work with embedded links. -
While trying to sync my iPhone, I get this message "This iPhone cannot be synced. You do not have enough access privileges for this operation." Why don't I have this access privilege? How do I fix this?
See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
How to select which RFC USERS have been accessed my host ?
Hi, guru
how to select which RFC USERS have been accessed my host ?
or how to record the RFC users's trace ?
because the auditor wants to know it.
Best regards,
Michaelhow to select which RFC USERS have been accessed my host ?
did you check ST03N->User profile ?
or how to record the RFC users's trace ?
Check ST01 for system trace. -
Why the apple store is so expensive and why the apple users can't access for free after spending huge amount in apple phone ?
The Apple store is correct. The warranty is not international, and Apple will not accept or return iPhones shipped from a different country. You need to ship the phone to somebody in Hong Kong who can take it in to Apple for repair, or pay a third party repair shop in the Philippines to fix it.
-
Why did I have to enable Windows File Sharing to share files between two Mavericks iMacs?
File Sharing failed between my Mavericks iMacs. The console logs showed that the target iMac saw the ntlmv2 protocol as unknown to the kdc. I fixed it by enabling Windows File Sharing on the target Mavericks iMac. I had tried disabling SMB on both iMacs and leaving AFP on, but then nothing happened when I tried to connect. Why did I have to enable Windows File Sharing to share files between two Mavericks iMacs?
When you enable file sharing you need to have either SMB (Windows) or AFP (historically Apple-native) file sharing checked. The default in Mavericks is SMB, and not AFP.
If you uncheck both, then the system will turn off file sharing. Apple supports the use of both SMB and AFP connections in Mavericks, so with only AFP enabled you should have been able to establish a connection, but there could be a small bug or configuration-specific snafu that you're encountering.
With AFP enabled only, try pressing Command-K in the Finder to open the Connect To Server dialogue, and in here enter the address to the system using afp:// as the protocol, such as the following (the name can be looked up in the Sharing system preferences):
afp://my_imac.local -
App that can access windows file sharing
Hello... I've got my Nokia 500 today, but i'm looking for an app that can access windows file sharing via wifi. I want to transfer my picture from cellphone to my computer via wifi..
Nokia 500 -> Wifi -> Computer (Windows File Sharing)...
Anyone please create an app for meTelexy SymSMB used to be such an app, but was taken off the market (Nokia demanded it, because apparently some Nokia employees were involved in developing the app). Don't know if anything similar has come out since then.
-
I just wanted to update firefox and it won't let me. I drag the icon into applications, then a window ask me if I want to replace older version. I click yes and the window mentioned above appears. I purchased this computer new, I'm the only owner. Why would I not give myself permission to do something on my own computer.
If you get an error message that you do not have sufficient permissions or have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I have a 2007 iMac running OS X Lion, all latest updates and patches applied.
My daughter has an account on the system, which I have limited to only being able to be used for a few hours a day.
The problem arises when she leaves herself logged in, but walks away, and the time runs out. When I sit down at the console, the first thing that happens is that the cursor disappears, and the systems starts to go into a logout. Makes sesne so far, I guess. However, the system then goes into what I can only presume is some sort of loop. The cube animation starts, and rotates back and forth several times between two screens, both equally hessian wrapped, with no distinguising features.
I can log into the system via ssh, and I can confirm that the system is spiking out on SecurityAgent:
Processes: 661 total, 5 running, 29 stuck, 627 sleeping, 2082 threads
19:59:08 Load Avg: 1.68, 3.07, 5.24 CPU usage: 43.38% user, 23.52% sys, 33.8% idle SharedLibs: 3620K resident, 1948K data, 0B linkedit.
MemRegions: 104350 total, 1295M resident, 189M private, 2974M shared.
PhysMem: 1166M wired, 3312M active, 1655M inactive, 6133M used, 9560K free.
VM: 1611G vsize, 1118M framework vsize, 34169473(356) pageins, 5796949(92) pageouts.
Networks: packets: 100372238/47G in, 162918821/146G out. Disks: 23914908/3252G read, 27697160/2570G written.
PID COMMAND %CPU TIME #TH #WQ #PORT #MREG RPRVT RSHRD RSIZE VPRVT VSIZE PGRP PPID STATE UID FAULTS
27013 SecurityAgen 98.0 37:41.27 2/1 1 88 84 508K 3904K 2664K 31M 2410M 27013 1 running 92 3028
28561 top 25.9 02:27.05 1/1 0 32 43 3752K 216K 4176K 20M 2381M 28561 28505 running 0 1924014+
1 launchd 4.6 50:43.63 3 0 3159- 343 2804K+ 2836K 2128K+ 15M+ 2405M 1 0 stuck 0 553252+
0 kernel_task 1.5 08:01:03 71/2 0 2 976 14M 0B 595M- 15M 5487M- 0 0 running 0 23008
197 WindowServer 0.7 01:57:50 5 1 6653 6448 22M+ 885M 486M+ 137M 40G 197 1 sleeping 88 25934192+
18548 Transmission 0.5 01:59:18 7 1 175 372 10M 7352K 16M- 47M 2550M 18548 282 sleeping 501 10297632
14 opendirector 0.4 02:27.27 13 13 617+ 108+ 6072K+ 1872K 6860K+ 32M+ 2417M+ 14 1 stuck 0 407028+
25117 mcxalr 0.2 00:40.33 4/1 3 43 41 200K 252K 1780K 30M 2391M 25117 1 running 54 1580
26441 SecurityAgen 0.2 00:01.55 2 1 121 245 2856K 19M 6820K 35M 2503M 26441 1 stuck 92 27427
28001 ManagedClien 0.1 00:00.11 4 3 98+ 86 1196K+ 4900K 3748K+ 31M 2413M 28001 27998 sleeping 0 3718+
294 UserEventAge 0.1 00:20.22 3 1 212 140 976K+ 3964K 2632K+ 34M 2422M 294 282 sleeping 501 294201+
28006 ManagedClien 0.0 00:00.11 4 3 97 86 1184K+ 4904K 3700K+ 32M 2414M 28006 28003 sleeping 0 3725+
28573 mdworker 0.0 00:00.41 4/1 2 55 101 8648K 6052K 13M 38M 2422M 28573 28443 running 89 4766+
27831 loginwindow 0.0 00:00.50 4 2 153+ 108+ 1692K+ 4804K 3252K+ 35M+ 2425M+ 27831 197 sleeping 0 4875+
15 configd 0.0 00:33.57 6 1 2316 230 2392K 1788K 3524K+ 27M 2420M 15 1 sleeping 0 320735+
28318 loginwindow 0.0 00:00.54 3 1 151 101 924K+ 4712K 3120K+ 33M+ 2423M 28318 197 sleeping 0 4778+
Now, obviously, because I can ssh in, I can start a clean shutdown and restart, but I'd like a way to do this that doesn't involve me bringing down the system, when the whole point of multiple users and parental controls is that a system can be shared cleanly.
Thoughts?
Thanks,
WillSee if this blog post that our support team created helps you with the connection information. This can create the desktop Access application linked up to the Access 2013 web app tables you have.
http://blogs.technet.com/b/the_microsoft_access_support_team_blog/archive/2014/03/24/how-to-make-external-connections-to-an-access-web-app-new.aspx
Also, you might just try clicking the Create Reports button in the Access web app client interface and Access will create the reporting database for you with links to the web app tables. On the File menu (when using the Access web app in client) make sure
to click the option to Allow Any Location under the Manage button. After that, just click the Create Reports button on the File menu (right above the Manage button) and wait a few seconds. Access will create a new desktop database linked up to all of the Access
web app tables. You can then create as many reports or other desktop objects as you like.
Hope that helps,
Jeff Conrad - Access Junkie - MVP Alumnus
Senior Content Developer - Office Content Development Team - Microsoft Corporation
Author - Microsoft Access 2013 Inside Out
Author - Microsoft Access 2010 Inside Out
Co-author - Microsoft Office Access 2007 Inside Out
Access 2007/2010/2013 Info: http://www.AccessJunkie.com
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/en-us/legal/Copyright/Default.aspx -
OBIEE users have full access unfort.
Hi guys, its my first query. I am a newbie.
My company bought BIEE. I did the configurations and connected it our Active Directory.
Problem is, everyone see everything in the forlders (analysis, dashboards etc...)
I will create roles/policies and anything needed to give them specific permisions. But they all seem to have full Access.
What can be the reason ? I dont want to give full permision to everyoneBy default all users belongs to BI Consumer
There might be something wrong in your roles or assigning users double check
~ http://cool-bi.com -
Why do microsoft users have difficulty in opening my PDF files
Why do some microsoft users have difficulty in opening my PDF files
1. They are just Microsoft users!
2. Do you include the file suffix? Windows likes file suffixes! -
What role should a user have to access 'ALRTCATDEF'
Hi all,
I am getting unauthorized eeror
When I am trying to access Tcode "ALRTCATDEF" in XI ,
When I am trying to access alertinbox, alertconfiguration in runtime workbench in XI ,
so what role should I have to access this?
I appreciate your reply
KKHi KK
You need following roles ::
SAP_ALM_ADMINISTRATOR --> Alert Management Administrator
SAP_ALM_CUSTOMIZER --> Alert Management: Role for Customizing
SAP_BC_ALM_ADMIN -->
SAP_BC_ALM_ALERT_USER --> ALM: Role for the alert user
SAP_BC_ALM_CUST
Some of them might be extra, what you asked for .
- Lalit - -
Why would a control have the customize option dimmed out when it is right clicked?
A numeric control in one of the examples has the customize option dimmed out when right clicked. Why would that be? Is there a way to get it into the control editor or saved as a control?
Just to clarify my earlier statement:
While customization was greyed out prior to LabVIEW 8.0 for items in the dialog (=system) palette, even LabVIEW 8.0+ does not allow much customization. For example if I try to customize the "System Numeric" control, the "wrench" is still greyed out and the only thing I can do is resize the control horizontally in the control editor.
This is as expected!
Dialog (system) controls inherit their visual appearance from the OS, and the same control will look different under Windows XP, Windows 2000, or MAC, etc. They adapt to the desktop theme, including fonts, font colors, and other colors, etc.. The attached Image shows the same pair of controls and how they change appearance if I switch the desktop theme between "Windows XP" and "Windows Classic".
Customization would make no sense, because the appearance is determined by the OS, not by you.
Message Edited by altenbach on 08-25-2006 02:19 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Theme.png 4 KB
Maybe you are looking for
-
Previously ringtone-able songs in library no longer ringtone-able?
I have hundreds of songs purchased from the iTunes store. When ringtones were released, more and more of my Purchased music showed up as ringtone-able in my library (showing the bell icon). At one point, over 250 songs in my library (Purchased music
-
How to use stroke outline in PSE 13
I am trying to use the stroke outline around a picture in PSE 13 and it is greyed out. Can anyone help me with this? Thank you in advance. Robyn
-
Can I use songs in my music library for ringtones?
Can I use songs in my music library for ringtones if so how?
-
Using VCM to compare hardware metrics on physical servers
Hi, I have a large physical server estate (mix of Win, RHEL and Solaris) which all have had the latest VCM agent installed. What I want to do with VCM is to select one physical machine and make it a baseline, then compare other physical servers to th
-
Print multiple emails in one go
I have a large number of emails which I can group together but need to print them out individually. Can I select this group and print out each one fully without having to open,print,close each one manually? thanks Dave