Why would aperture load more than once?
I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?
1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space.
Similar Messages
-
Why do holidays appear more than once?
Why do holidays appear more than once?
I have the new iPad and iPhone 5
both run on ios 6
I have multiple holiday calendars on both devices
Step 1: delete your gmail account and calendars go away
Step 2: DELETE your icloud account under setting on iphone and select also delete on iphone
Step 3: add Gmail and Calendar by following directions below (you will NOT get multiple google calendars)
Step 4: go back under setting and sign up for icloud again and turn everythin you want on, ON, even Calendar
You are done, no multiple calendars
**I struggled for a week with this issue and researched online and tried other methods such as unchecking default Birthday icloud calendar, hard reset, uncheck holidays in Gmail, on iphone, none of it worked.....what worked were Steps 1-4 above!!!!)
My iphone 5 is perfect now..no 20 of the same holidays in one day!!!
By the way if you want multiple Google calendars to show up do it this way:
First of you are a gmail user, do NOT use the default gmail sync option if you want ALL of your calendars from Google to show up, multiple colors etc); use MS Exchange, server address is m.google.com
Then go to m.google.com/sync to sync your iphone calendar ON YOUR IPHONE BROSWER, you check mark the calendars you want
Presto, your Google calendars -- all of them -- show up -
AddOn: Prevent from loading more than once
Good Afternoon
Experts:
I appreciate you patience as I resurrect this topic since it has become an
increasing concern here. We need a way to restrict our AddOn from "being in"
Task.mgr more than once. We are working with Terminal Services. A couple ways we have found more than one instance in TM is the User just opening another session or opening another session after a "problem/Issue/Crash".
I have this code which restricts the AddOn from starting more than once here on my local machine:
Public Sub Main()
Try
Dim x As Integer = 0
Dim Ctr As Integer = 0
Dim som() As System.Diagnostics.Process
som = System.Diagnostics.Process.GetProcesses
Dim Name As String
For x = 0 To som.Length - 1
Name = som(x).ProcessName.ToUpper
If som(x).ProcessName = "Test.Enhance" Then
Ctr += 1
End If
Next x
If Ctr > 0 Then
MsgBox("LBSI.Enhance AddOn is already started...Exiting application.", MsgBoxStyle.Critical)
Exit Try
Else
ReInitializeAddOn()
Application.Run()
End If
Catch ex As Exception
HandleException("Main", ex, True)
End Try
End Sub
Is there a better more elegant way to do this? How about for Terminal Services?
Thanks in advance for your insight,
EJDNot answered...so I will close.
-
Why Cant I Space More Than Once?
Hi Im a noob at DreamWeaver and for some reason it wont let
me space my words out with more than one space. Is there a way to
be able to space more? ThanksBe aware tht this is definitely NOT a best practice.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:edcbe5$7vt$[email protected]..
> SirEskimooo wrote:
>> Hi Im a noob at DreamWeaver and for some reason it
wont let me space my
>> words out with more than one space. Is there a way
to be able to space
>> more? Thanks
>
> That has nothing to do with Dreamweaver, but with the
way that HTML works.
> HTML ignores all whitespace between text and replaces it
with a single
> space.
>
> If you want to insert more than one space between words,
you need to
> insert a non-breaking space. The keyboard shortcut is
Ctrl+Shift+Space.
> This inserts in the underlying code.
>
> --
> David Powers
> Adobe Community Expert
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
>
http://foundationphp.com/ -
Why same fields appearing more than once in a Table like EKPO , KNA1 ???
hi ,
in SAP IDES version u will see :
In EKPO table : Two fields MATNR and EMATNR having same spec. and
showing same redundant data in IDES version .
IN KNA1 table : NAME1 field appears twice ...
why so ? any utilities / Reason ????HI,
kna1 is customer master table.
now 1 customer can have 2 names like 1 official and one nick name or 2 persons or brothers who are given only 1 customer no kunnr by their vendor.
these things are done by seeing all the business scenarios.
now in table EKPO
MATNR IS PRODUCT NO
EMATNR IS MATERIAL NO.
now there is a difference between product and material.
a material can be a raw material semi finished or finished good,but a product is always a material which is been purchased through the purchase order from the vendor.
the matnr is essentially the final stage of the product by the vendor.
in many cases these contain same data but there are a lot of cases when these things worry.
if you have accesss to your production system then you can check there.
thanks
reward if helpful
vivekanand -
Why was i charged more than once in one game
Hello there i was charged 5 times $1.00 and the regular price of the game once 2.99
Contact iTune Support
http://www.apple.com/emea/support/itunes/contact.html -
Why would you need to "zero out" more than once?
Sorry if this is a dumb question, but I have always wondered why a hard drive would need to be written over more than once for better security?
If it is writing ALL zeros what is there left to find? I just don't get it.
Thanks,
Curious TomHello! A random write could leave a few bits that might be salvadged while the "zero all data" maps out bad blocks and writes all zeros. Once should be enough. Tom
-
''locking as a duplicate - https://support.mozilla.com/en-US/questions/876430''
I have thousands of favorites and Firefox is my web-browser of choice. Sadly I'm backed up on what bookmarks I have stored and if the websites are still active or not.
I cannot load more than 15 bookmarks it seems at once as my PC is trying to load all the web content for each page in the new tabs.
This is my PC specs:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name xxxxxxxx
System Manufacturer System manufacturer
System Model System Product Name
System Type X86-based PC
Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2210 Mhz
Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2209 Mhz
BIOS Version/Date American Megatrends Inc. 0301, 21/08/2006
SMBIOS Version 2.3
Windows Directory D:\WINDOWS
System Directory D:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
User Name xxxxxxxx/ADMIN
Time Zone Atlantic Daylight Time
Total Physical Memory 2,048.00 MB
Available Physical Memory 1.53 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 3.85 GB
Page File D:\pagefile.sys
I have High Speed internet connection with the provider Rogers.
Dlspeed is 12.9 Mbps
Upspeed is514 kbps
My PC supports Windows 7 OS which I have as a multiboot alternative when my PC starts up.
I have continually waited and it says Firefox is not responding and I may be able to see the multiple tabs opened in my browser but cannot navigate or access them.
I have read on various sites that users have had as many as 1500 bookmarks load at once in tabs in the Firefox browser version that are outdated.
I have not been successful with just loading 50 bookmarks my goal is to be able to have 500 tabs loaded in firefox with webpage loading stopped on all of them. I will choose reload for about 10 tabs at a time to view webpage content and then close and move on to the rest.
My ultimate goal is to clear up the Thousands of bookmarks I have piling on for the past 6 years and some are duplicates or similar page sites.
Their is no Firefox 3rd party addons that I could locate that would allow this. Only to restrict the number of tabs loaded by giving warning messages when limit is reached.
Please assist me as it will greatly help me with finally deleting and re-organizing my Favorite and frequent websites in my Browser of choice Firefox.
The email is generic for privacy but it is valid please respond with methods on how I can achieve my request or suggestions on how I can modify my browser or PC settings to allow this. Thanks Firefox Administration Team.
I edited with a recent Workaround added to Troubleshoot section.
If there is a keyboard shortcut or easier way to do this would someone please let me know?Firebug is notorious for causing problems like you described.
Disable it when you don't need it or install it in a 2nd Profile. Then you can launch the 2nd Profile separately to use Firebug and not affect what you are doing in the 1st Profile, -
Load rule to update alternate hierarchy with shared members more than once
I have a aso cube with an alternate hierarchy that is not stored because the shared members appear more than once. Below is how my alternate hierarchy looks.
Dept
Class
VolumeLevel
StoreNum
where StoreNum is the shared member.
I build the cube using eis every weekend. The VolumeGroup changes everyday, so I was thinking of using a sql load rule to update the outline everyday. Assuming that the data and the aggregation does not get cleared. Is it possible to do it using sql load rule?
Thanks,You can check here if you are satisfying the conditions for creating shared members under the Hierarchy (refer to Alternate Hierarchies). Plz note that rules for shared members are different in ASO world.
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/frameset.htm?acrtapdb.html
Otherwise there is no reason why you should not be able to create a shared member.
I am able to create a hierarchy using a sample file like this ->
EN_MAIN, EN_500000
EN_500000, EN_49999
EN_ALT, C_500000
C_500000, EN_49999
ENTITY (Multiple Hierarchies Enabled)
|-EN_MAIN (Stored)
|--EN_500000
|---EN_49999
|-EN_ALT (Stored)
|--C_500000
|---EN_49999 (Shared)
The rule file has only "Allow Property Changes" on.
Thanks,
Sunil -
Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
BragaActually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
R1 R2
93 74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
R1 R2
78 78Richard -
why do i have to pay more than once for my purchased album in itunes, when i download them again?
Probably because you purchased them again, instead of following the proper method for redownloading apps.
Downloading past purchases from the App Store ... - Support - Apple -
Why does 1 cd appear more than once on the ipod
Hi
I have a Classic ipod and use Windows 7; I have a couple of items which are appearing more than once on the ipod but only once on the laptopHi rhduff,
Welcome to the Support Communities!
The following article will help you with this.
Follow the instructions to manually sync your iPad, and remove any songs that you don't want.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113?viewlocale=en_US
I hope this information helps ....
Have a great day!
- Judy -
Bug! Hot-deploying the same bean more than once results in a DeploymentException!
Hi all,
Anyone else having this problem? When re-deploying an EJB within a
running WL server 4.5.1 w/ sp9 more than once results in the following
DeploymentException. The first time we re-deploy it works fine, but any
re-deployments after that fail.
This is potentially fatal in that if we have to make more than one
change to a bean over time and re-deploy those changes, we have to cycle
the server, which is NOT acceptable for a production environment!
Any clues or workarounds would be greatly appreciated.....Thanks!
BP
[xxxx.xxxx.com] < /pkg/bea > java -classpath
/pkg/bea/classes:/pkg/bea/lib/weblogicaux.jar weblogic.deploy -redeploy
xxxxxxx file:/pkg/bea/classes/OurSessionBean.jar
weblogic.ejb.common.DeploymentException: Unable to create bean
classloader:
weblogic.ejb.common.DeploymentException: loading EJB JAR
/local/pkg/bea/depot/weblogic-4.51/classes/OurSessionBean.jar; nested
exception is:
java.io.EOFException
java.io.EOFException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(IOException.java:35)
at java.io.EOFException.<init>(EOFException.java:43)
at java.io.DataInputStream.readUnsignedShort(Compiled Code)
at
weblogic.utils.classfile.LineNumberTable_attribute$line_num_struct.read(Compiled
Code)
at
weblogic.utils.classfile.LineNumberTable_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.Code_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.ClassMember.read(Compiled Code)
at weblogic.utils.classfile.MethodTable.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.computeExclude(Compiled
Code)
at weblogic.ejb.internal.EJBJarLoader.initialize(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.setup(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.redeploy(Compiled
Code)
at
weblogic.ejb.internal.EJBJarDeployment.redeploy(EJBJarDeployment.java:629)
at
weblogic.ejb.internal.EJBManagerImpl.redeploy(EJBManagerImpl.java:266)
at
weblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:169)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestDispatcher$BasicExecuteRequest.execute(Compiled
Code)
at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
at java.lang.Throwable.fillInStackTrace(Native Method)
at
weblogic.rmi.extensions.BasicRequest.sendReceive(BasicRequest.java:44)
at
weblogic.ejb.common.EJBManager_WLStub.redeploy(EJBManager_WLStub.java:312)
at weblogic.deploy.deploy(deploy.java:129)
at weblogic.deploy.runBody(deploy.java:79)
at weblogic.utils.compiler.Tool.run(Tool.java:55)
at weblogic.deploy.main(deploy.java:140)how about undeploy an already deployed bean first and then trying to redeploy.
becoz i know there's an option like that with DDDeploy. I am talking of 5.1 but the
logic should probably work in 4.5 too.
Try doing it and see what happens.
-Vikas
Blah Blah wrote:
Hi all,
Anyone else having this problem? When re-deploying an EJB within a
running WL server 4.5.1 w/ sp9 more than once results in the following
DeploymentException. The first time we re-deploy it works fine, but any
re-deployments after that fail.
This is potentially fatal in that if we have to make more than one
change to a bean over time and re-deploy those changes, we have to cycle
the server, which is NOT acceptable for a production environment!
Any clues or workarounds would be greatly appreciated.....Thanks!
BP
[xxxx.xxxx.com] < /pkg/bea > java -classpath
/pkg/bea/classes:/pkg/bea/lib/weblogicaux.jar weblogic.deploy -redeploy
xxxxxxx file:/pkg/bea/classes/OurSessionBean.jar
weblogic.ejb.common.DeploymentException: Unable to create bean
classloader:
weblogic.ejb.common.DeploymentException: loading EJB JAR
/local/pkg/bea/depot/weblogic-4.51/classes/OurSessionBean.jar; nested
exception is:
java.io.EOFException
java.io.EOFException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(IOException.java:35)
at java.io.EOFException.<init>(EOFException.java:43)
at java.io.DataInputStream.readUnsignedShort(Compiled Code)
at
weblogic.utils.classfile.LineNumberTable_attribute$line_num_struct.read(Compiled
Code)
at
weblogic.utils.classfile.LineNumberTable_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.Code_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.ClassMember.read(Compiled Code)
at weblogic.utils.classfile.MethodTable.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.computeExclude(Compiled
Code)
at weblogic.ejb.internal.EJBJarLoader.initialize(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.setup(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.redeploy(Compiled
Code)
at
weblogic.ejb.internal.EJBJarDeployment.redeploy(EJBJarDeployment.java:629)
at
weblogic.ejb.internal.EJBManagerImpl.redeploy(EJBManagerImpl.java:266)
at
weblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:169)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestDispatcher$BasicExecuteRequest.execute(Compiled
Code)
at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
at java.lang.Throwable.fillInStackTrace(Native Method)
at
weblogic.rmi.extensions.BasicRequest.sendReceive(BasicRequest.java:44)
at
weblogic.ejb.common.EJBManager_WLStub.redeploy(EJBManager_WLStub.java:312)
at weblogic.deploy.deploy(deploy.java:129)
at weblogic.deploy.runBody(deploy.java:79)
at weblogic.utils.compiler.Tool.run(Tool.java:55)
at weblogic.deploy.main(deploy.java:140) -
Calling thread.start() more than once concurrently
Hi, I got a simple doubt that may feel awkward or absurd to people who are well versed in the java threading concepts. I just thought of it and as I couldn't get an easy answer I am posting this.
Consider a class that implements the runnable interface. The run() method of the class is implemented with just a System.out.println(). If I make an instance of this class, say 't' in the main method and calling t.start() susequently twice or thrice; an illegal ThreadStateException will be thrown. The code snippet is as follows:
ThreadTest t = new ThreadTest();
t.start();
t.start();
It is understood that state of the thread object is changed to run state and so, if it is again started, it must be thrown. So if I put a Thread.sleep() inbetween these two subsequent calls assuming that the main method thread will be sleeping. So there is sufficient time for the first thread to terminate and then only the second will start - still the same exception is being thrown. I tried putting the synchronized qualifier for run too, still no effect - the same only happening. Why the java thread object is made in such a way that once the thread changes it state from Runnable to Running and then finally to dead state, it can be restated back to Runnable state, such that the start() method can be called again. Is it possible or not? Please post your comments.As ejp says you can't start a thread more than once - even if it has already terminated after the first start.
By making threads a one-shot it simplifies reasoning about them: you don't have to wonder whether a second start() will work or not, depending on whether the thread has completed its first "incarnation". It also makes it easier to ensure thread resources are reclaimed. It also avoids semantic issues like whether anything about the thread is "carried over" across incarnations.
This might seem a limitation but there are many ways around it - simply don't let the thread terminate. Whatever control structure you would enforce by re-starting the thread can be emulated without letting the thread terminate in between "executions". -
Hello,
I am trying to create a project using the statechart module, and one of the techniques I am trying to use is a "master-slave" statechart structure, illustrated by the code I have attached to this post (you probably need the statechart module installed to look at my example code). The problem I have recently discovered is that the slave statecharts cannot be launched more than once without raising an Error 1100 at Obtain Queue. I have gathered from a few other posts that the cause of this error is the fact that the First Call primitive is used by the Statechart module to initialize the statechart when it is first run. This works fine for the first launch of the slave statechart, but the second launch and subsequent launches of the statechart fail on Error 1100, since the First Call primitive won't let the statechart initialize (the First Call primitive tells the statechart it has already been initialized (this isn't the first call), and the External Trigger function then tries to send an external trigger to a queue that doesn't exist).
What I can't gather from those posts is the correction I need to make to get this design to work. I tried to send the slave statecharts a boolean flag for the "Init?" terminal, to force a reinitializing of the slave statechart. I couldn't get that to work. I tried to not load the slave sub VI as a slave sub VI, and launch it using some VI Server code, so that maybe the slave sub VI would be loaded and unloaded, therefore causing the statechart to properly initialize, but I couldn't get that to work either. What correction should I make? How do I get this to work?
I really want to use this design pattern, first of all since I wrote a lot of code already with this structure, and second of all, it makes a lot of sense to me. How do I make it work? If someone could post a version of my code that functions the same, but without the error, I would appreciate that. If you don't have time for that, but would be able to outline the steps I need to take to get it to work, that would be helpful, as well.
Thanks to anyone for any assistance they can provide. If you need any other information, please let me know.
Attachments:
Statechart Sample.zip 431 KBThanks, Deborah. I tried this approach out, and it turns out you can't just wire a TRUE to the "Init?" terminal. You have to wire a TRUE for the first run of the slave statechart, and then it has to become a FALSE. If you wire a TRUE, it will constantly try to reset the statechart, which doesn't work.
The master statechart has to keep track of whether it has called the slave statechart, and communicate that to the slave statechart. On the very first call of the slave statechart, the "First Call?" function inside of the "Run Statechart" function will give a TRUE, which initializes the statechart properly, and then gives a FALSE from that point after. After that, the "First Call?" function doesn't work anymore (it will always return FALSE), and an initial TRUE, with subsequent FALSE values, has to be provided manually.
I attached a version that does this, which appears to work. Let me know if it doesn't work for someone, or if you have a better idea to implement the correction.
Thanks to everyone for the replies!
Attachments:
Master-Slave Statechart Sample.zip 439 KB
Maybe you are looking for
-
How to kill a single user in BO XI 3.0
Hello, I thought there was a SDK for killing single users on a system. Can someone help me out again on where to find this procedure. thanks Thierry
-
Error Message: CORE USER CREDENTIALS NOT FOUND
I was prompted to automatically update Digital Editions 1.5, which I did. I'm on the same computer I've always had. I authorized the computer; however, now when I try to access my library, I get this message: Error W_ADEPT_CORE_USER_CREDENTIALS_NOT_F
-
I have a macbook Air 2008 model no: A1237
i have a macbook Air 2008 model no: A1237, I want to change the screen but don't know what size to order
-
Hi, I have a windows cluster SAP R3 4.7 with oracle 10.2. I have implemented backup with brtools 7.0 with split copy, using split_cmd command to split filesystem and post_split_cmd to start sap. Bac Brbackup finish successfully but with the warning:
-
i have purchased iphone 3gs a while ago from UK and i was traveling to US on a business trip for about 8 weeks in the first week only something happened to my iphone and it got hang. i tried everything but it didn't work.. i talked to apple people th