Why would I get different sized exe's if I build the same source code and target the same RT target?

Hi Bob P (Dr. RT) et al,
This is driving me nuts! I have a VI that uses different amount of memory depending on which machine I use to do the build.
I use the same build file and the same source.
It is targeted at the same cFP2000.
FP version is the same.
LV version is the same.
If I build it from the one machine, there is enough memory available to target the RT platform, show the front panel and do a "show RT engine info".
If I try this from the other machine, the cFP crashes, starts flashing the "status light" and latter on the crash dump file indicate "insuffiecient memory to complete this operation".
The OS on the two machines are both XP. O
ne is a laptop (the one that works) the other is a tower.
Are there any LV ini file settings that could be hitting me?
My customer is seeing the same issue, so it not just me.
Any clues?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Hi Bob,
Few questions:
1)Ftp to your target. Are the exes the same size on disk?
No
2)Build the exes on the hosts. Are they the same size on disk?
I will have to look at this.
3)Can you determine whether the exes consume the same amount of memory when loaded on the hosts?
They will not run on the host because they use inport/output (to control serial port handshake lines).
4)Does your application call any dlls via an NI driver or custom-built?
THey use the "Settime.dll. At build time the builder says the target OS has its own version of this (and FP).
I'm doubtful that any LV ini settings are causing this behavior. If I had to take a guess, it could be related to dll versioning. Do the hosts have identical versions of *all*
drivers/dlls called by your app?"
Can you give me a suggestion on how verify this.
I have double checked LV (6.1) and FP.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Why would I get a bright green vertical line down the center of my screen after playing a game?

Why would I get a bright green vertical line down the middle of my screen after playing a game?

Hi @DustMidnight85
Welcome to the HP Forums!
It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having an issue with the display but if you adjust the position of the display it disappears.
Here is a link to Display Quality Issues that may help.
As you stated it goes away when you reposition the display the connection cable may have become loose or damaged from opening and closing the display.
Here is a link to the HP Pavilion 14 Notebook PC, HP Pavilion 14 Touchsmart Notebook PC, HP Pavilion 14 Touchsmart Ultrabo.... Chapter 4 page 36 has removal instructions that may assist you in checking for that problem.
If your notebook is in warranty or you would like help please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Why do I get different tag icon combinations?

This is really bugging me and I can't fing an answer anwhere. I've just started organizing my photos by adding albums and keyword tags. I add the album to all the pictures and get a green album icon on the thumnail. Then for most of the images when I add a tag the album icon is gone and is replaced by a beige tag icon. But for some of the images, when I add the tag I get separate green album and blue tag icons. Why do i get different icon combinations depending on the image? Please help!!.

Yeah I’m sorry it’s not been fixed. I did complain to Adobe shortly after PSE9 was issued, when everything got given an orange tag. It seems to make no difference what icon you choose from the list, it ends up with something that looks like a luggage label colored beige. Of course the keywords will work but it’s all a bit frustrating.

Why do i get different photos when i hover or click on a thumbnail picture in iPhoto?

When I hover or choose a thumbnail picture in iphoto I get a completely different photo from that album. Is something corrupted?

Try to rebuild your thumbnails.
What is your iPhoto version? Assuming it is iPhoto 9.5 hold down the key combination⌥⌘ , while double clicking the iPhoto icon to launch iPhoto in First Aid mode. Keep holding the keys down, until you are seeing the First Aid panel.
Select "Rebuild Thumbnails".
If rebuilding the thumbnails does not suffice, try the "Repair dtabase" option, and finally the Rebuild database. But make sure, your update of your iPhoto library is current and working, before you try a rebuild.
-- Léonie

HT1373 So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/i

So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/ipod

Download them to the computer to which the iPod is synced, re-sync.
Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

Hello, i have youtube videos on my iweb site. but i would like to know if it is possible to get a 'pop-up' affect when you click on a small photo of the video, to open and play the video in a popup?

hello, i have youtube videos on my iweb site. but i would like to know if it is possible to get a 'pop-up' affect when you click on a small photo of the video, to open and play the video in a popup?
we have tried using video light box, but this doesnt seem to work.

There's an example of one at the buttom of ths page...
http://www.iwebformusicians.com/Website-Movie-Video/YouTube.html
Rather than link to the file, the movie is on a separate web page and uses the code shown on this page...
http://www.iwebformusicians.com/Website-Photos/Image-New-Window.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

When I sync iphone to itunes, why do my soundtracks not show as albums but via artist? IE: Pulp Fiction has 16 songs by different artists. In itunes I can pull up pulp fiction and play the 16 songs. In iphone sync the 16 songs are seperate

When I sync iphone to itunes, why do my soundtracks not show as albums but via artist? IE: Pulp Fiction has 16 songs by different artists. In itunes I can pull up pulp fiction and play the 16 songs. In iphone sync the 16 songs are seperate and listed by Al Green, cowboy junkies etc... How to fix this so the ipod part of my iphone will show & play the soundtracks as albums... thanks.

What is selected under the Music tab for your iPhone sync preferences with iTunes?
If you have chosen selected playlists, artists, albums, and genres - if Pulp Fiction is available under the Albums section to be selected as an Album to be transferred to your iPhone, is it selected?
If so, when you select Albums via the iPod on your iPhone, the album is not available there to select?
You can always create an iTunes playlist with these songs placing the songs in your preferred order.

I try to get log on to the itunes store, says accessing store that the screen goes white and only the apple symbols is in the top box...nothing else...WHY

okay i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY. Is the store down??

Hello there jodi o,
It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
Can't connect to the iTunes Store
If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
iTunes: Advanced iTunes Store troubleshooting
If you are using Windows, you should also try the information in this article:
Apple software on Windows: May see performance issues and blank iTunes Store
Thank you for using Apple Support Communities.
All the best,
Sterling

HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

Why do I get a message that my Flash CS6 is counterfeited after I downloaded it from the Adobe web?

Why do I get a message that my Flash CS6 is counterfeited after I downloaded it from the Adobe web?

Genuine Verification failure downloading or installing
Mylenium

Why when my music was matched to the CLOUD did my music become the clean/censored version and how the **** do I get back my original music?

Why when my music was matched to the CLOUD did my music become the clean/censored version and how the **** do I get back my original music?

Why when my music was matched to the CLOUD how did my music become the clean/censored version and how the **** do I get back my original music?

Get the session trace files and also the TKPROF reports for storedprocedure

Hi ,
I am trying to find out the bottlenecks on a storedprocedure, which does a insert into a table, where the target table has lot of indexes/constraints, so i want to see, which indexes/constraints is causing the problem. so in order to do I want to get the session trace files and also the TKPROF reports to see the bottlenecks for a oracle stored procedure,
Could you please give us the list of steps to get the tracefiles and tkprof reports.

781649 wrote:
Thanks for input, i am using oracle10g standard edition. i dont think i have these tools available (DBMS_PROFILER or DBMS_HPROF). Did you even bother to try the following?
SQL> DESC DBMS_PROFILER
SQL> DESC DBMS_HPROF
I understand it would be too much to expect you to actually Read The Fine Manual
I am using bulk collect for all in my storedprocedure to insert the rows into a big table. In order to perform analysis on this bulk collect which tool will help me to identify the bottlenecks .
I want to compare background session properties for both runs (like inserting the data with indexes/constraints vs without indexes/constraints). please let me know..I am willing to bet you the problem/slowness is on the SELECT side & not the INSERT!
Just Curious
Handle:      781649
Status Level:      Newbie
Registered:      Jul 12, 2010
Total Posts:      35
Total Questions:      17 (14 unresolved)
Why so many unanswered questions?
Edited by: sb92075 on Jan 17, 2012 3:13 PM

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop. How do I get it to recognize it again?

Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop. How do I get it to recognize it again?

Thank you so much for responding. I will look for the other disks.
One more question - I initially decided to do this because my Mac kept opening with the date changed to 2008, and I keep having to re - enter my Web key. In addition, it was running much slower. Since I 'cleaned' everything out, I thought all would work perfect. This morning, the date changed to 2008; again AND it again asks for my Web key. Does this mean my Mac has reached it's almost end or could I have a 'bug' on it?
Again, thanks so much for your suggestions.

How to get the HTML Source code from the active browser ?

Hi All,
I need to get the HTML Source code from the active browser (IE). I tried with the below code, but I am not able to get the Source code all the time, with respect to the different applications (http or https) and the user authentication has to be changes in few applications (_I dont know or not able to given that in the below code_). More over there is also a dependence of the URL to get the HTML Source code.
Therefore what I feel is getting the HTML Source code from the given or active browser will be consistent than the URL. Since the Source code is available in the browser (IE) . Please help me with a sample code to achieve this . . . !
HTMLDocument doc=(HTMLDocument) kit.createDefaultDocument();
doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);
URL url = new URL(strURL);
Reader HTMLReader = new InputStreamReader(url.openConnection().getInputStream());
kit.read(HTMLReader, doc, 0);Thanks in advance,
Regards,
Jothi Venkatachalam
Edited by: j0o on May 7, 2009 3:11 AM

The simple answer is: you don't.
Not only is it simply not possible, but the entire concept of "the active browser" doesn't exist.
You were on the right track with your code to retrieve the page directly from the server, but as you noticed that code will only work for regular http connections.
For https and other protocols you will need to use appropriate libraries for each protocol. Something like Apache Commons can help you with that. There are networking libraries in there for a lot of commonly used protocols.

Why would I get different sized exe's if I build the same source code and target the same RT target?

Similar Messages

Maybe you are looking for